Providing plantation,footpath, Gym items, play materials and Clearing Heavy Jungle at Sekkadu VGN East Park in ward No 37.

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supplying and fixing of following Play Materials. The cost shall inclusive of all materials, labours and fixing etc complete as directed by the dpeartmetal officers

Spiral Slide (8ft)

Marry Go Round

Jungle Gym

Double Swing

Duck Rider

Horse Rider

Four Seater SEESAW

Supply,delivery and Fixing of Following GYM Outdoor Fitness Equipments,including cost and conveyance of material, loading ,unloding and trasportation charges,incidential charges etc,complete as per Engineer incharge

Standing Twister -Double

Hand Rower

Elliptical Trainer

Lat Pull Down- Single

Hip Shaper

Leg Press - Dual

Chest Press - Single

Tai Chi Spinner

Stepper cum Twister

Supply and fixing of 48W LED Street Light Fitting with LED etc,complete as per standard specification.

Supply and fixing 1.5 sq.mm. (22 / 0.3) PVC unsheathed SC copper cable ,complete as per standard specification.

Providing Three Seater arrangements with Granite Slabs of 20mm thick over the 100mm thick Precast Slab with 230mm thick, 600mm height side walls and Plastered with C.M. 1:5, 12mm thick, white washing two coats. The cost shall include all labour and materials and as directed by the departmental officers.

Supply and delivery of Animal sculptures using necessary accessories with fibre materials model not less than 2 m height required including cost and conveyance of all materials and incidiancial charges etc., complete as per the standard spcification. (Elephant, Deer, Giraffe, Hourse)

Providing various desings of Animal Dust Bins made of 3 layer fiber structures with multi colour powder coating. The height of the dust bins 4 feet. Available models are Penguin, Rabbit, Fish & Monkey cost including all costs, transporation charges and all other incidental charges etc., cost including all cost etc., complete as per instructed by the departmental officers.

Site cleaning using jcb hire charges..

Towards cost of Geophysical investigation survey charges.

Supply and delivery of 200mm dia of (Casing medium) PVC casing plain pipe including cost and conveyance at site etc., complete as per standard specification (Twad S no 1.1 pg.no 22)

Supply and delivery of 150mm dia of (Casing medium) PVC casing Slotted pipe ( Company Slots) including cost and conveyance at site etc., complete as per standard specification ISI make (Twad S no 1.1 pg.no 22)

Supply and delivery of 150mm dia of (Casing medium) PVC casing plain pipe including cost and conveyance at site etc., complete as per standard specification `(Twad S no 1.1 pg.no 22)

Drilling of 200mm dia bore wells any where is chengalpattur district including tranportion from one place to aother place with in this district in alluvial soil or sedimentrary starata using rotary rig by first drilling a pilot bore of 150 mm dia by direct rotary mud circulation method using contractors rig tool fuel, labour drillng bentonite mud and water required for drilling,

Drilling 150mm dia pilot bore to the required depth Below ground level.(Twad S no 12 pg.no 302)

Drilling 150mm dia pilot bore up to 60 m to 90 m from Ground level.(Twad S no 12 pg.no 302)

Supply and delivery of 200mm dia(8”) PVC end cap including cost and conveyance etc., complete (Twad Sor 1.5 pg.no 27)

Reaming from 150mm dia pilot bore to 200mm dia size bore as directed by the Departmental Officer, to the required depth up to 60 from Ground level (Twad Sor 12.b pg.no 302)

Labor charges for inserting the P.V.C. casing pipes assembly with slots (or) without slots in the drilled holes including joining the pipes etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Municipal Engineer excluding cost of casing pipe etc., complete 200mm dia PVC casing pipe (Twad Sor 12.e pg.no 304)

Charges for developing the bore wells with Air Compressor 600cfm (Minimum 8 hours) including transportation labor and fuel charges for Compressor as directed by the Departmental Officer and conducting yield test by “V” notch method.(Twad Sor b pg.no 305)

Supply and Fixing of 5HP Motor Submersible Pump set ISI mark IS 8034Without panel board 75LPM and 60M Head including Fixing Charges and all Charges etc. Complete.(Rate with TNVAT @4% on Basic cost Excise Duty)(Sor S no 408 pg.no 105)

Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

Supply and Delivery of 2.5 Sqmm PVC insulated and Sheathed 3 Core flat type copper cable confirming to IS 694/1990 Including all charges with excise duty and handling charges etc (Twad Sor S no 12.1 pg.no 120)

Towards Labour Charges for the errection of Submersible pump set in bore well including fixing and jointing submersible cable with proper clamps up to the starter to riser pipes to the required depth valves erection clamps, pressure gauge up to the exterior of panel board consisting of TPICN switches starter ,Volt meter, Ammeter, three pilot (indicating) Lamps capacitor single Phasing preventor,water level guard and laying and jointing the cables and twin earthing as per IE rules etc., Complete and testing the pump set and trail run for 10 days 2 HP Plat form All round (Twad Sor S no 17.3 pg.no 308)

Supply and run off 4 to 6 Sq.mm polythene insulator and PVC sheathed (Heavy Duty) service meter Aluminium cable of 1100 V grade on bearer wire for servive connection mains (SD 61).(320 Aluminim Wire)(Twad Sor S no 12.0 pg.no 120)

Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete

2" dia Pipe clamp set (Twad s no 5.16 pg no 44)

2" dia pvc bend (Sor s no 395 c pg no 100)

2" dia Pvc Elbow (Twad s no 5.16 pg no 44)

2" dia gate valve (Twad s no 5.2 pg no 45)

2" U Pvc Pipe (Twad s.no3(6) pg no 24)

2" dia pvc pipe (Sor s no 394 pg no 99)

2" dia pvc Tee (Sor s no 395d pg no 100)

3/4" dia pvc Tee (Twad s no 5.2 5.16 pg no 44)

3/4" dia pvc Elbow (Twad s no 5.2 5.16 pg no 44)

3/4" dia Pvc Tap (Sor s no 160 pg no 68)

3/4" dia pvc Coupler (Twad s no 5.2 5.16 pg no 44)

saddle piece (Twad s no 5.1 B 5.16 pg no 44)

Supply and delivery and fixing of HDPE tank 1000 litres capacity as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixnig charges as directed by TWAD Board officers etc.,(Twad S no 17.0 p no 89)

Providing Construction of Brick work for HDPE tank with Pcc in 1:2:4 and Brick work CM:15 using II class ground moulded bricks of size 8 3/4 x 4/2 x 3/4 Earth Filling Plastering CM 1:5 20mm Thick painting etc Complete

Supply and fixing of 0.75 x 0.75 x 0.45 size made up with MS angle and plats of a kiosk erected on a masonary pedsal for protecting accessories etc., complete complying with standard specification.(Twad s no 18.0 pg no 89)

Supply and delivery of 25mm GI Pipe Service Pipe With Bend Including Coat and Coneyance etc,Complete as per Standard Specification as Directed by the Departmental Officers (Twad S no 50 Pg no 42

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.