Febrication and Fixing of cantilever Over head signage Type Prismatic reflective sheeting signage at IA Kosi Kotwan Distt Mathura

Amount

6MSpan over head Cantilever Structure with 300 dia M S one vertical post Supply, fixing & erection of built up Cantilever Structure 6 m span comprising of one vertical posts of 6.00 m heigh made up of 300 mm NB heavy class MS pipe as vertical member welded with 10mm MS plate at top &12 mm M S plate at bottom, The horizonal Truss shall comprise of 50 mm dia heavy class MS pipe and 40 mm dia heavy M S pipe as bracing & 10mm MS plate at bottom for fixing to vertical post as per structure desing & drawing with one of steel primer and two coasts of synthetic enamel plant. The work includes contruction of RCC Foundation of size 0.90x0.90x1.50 m of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean concrete in 1:3:6 Cement coarse and 40 mm gauge stone ballast and RCC- M25 grade conrete including supply and fixing of 25 mm dia Foundation Bolt 600 mm long as per provision of structure design including cost of reinforcement & shuttening. The lateral The lateral vertical clearances and complete. Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2012 complete in all respect The Rates Shall include cost of design fabrication, supply, transporttalion, Local shifiting Erection of signage strusture using crane, inclusive of all taxes etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge. 6Mtrtr. Rate taken as per SOR 2022-23 Agra Circle Page 77 MORTH-802.

Retro-Reflective Sheeting type-iv with 4mm thick ACM Double Side: Providing & fixing of reflective sings with a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully coverd with High Intensity prismatic sheeting type IV as per IRC-67:2012retro reflective sheeting with back frame MS angle of 35x35x5 mm Legends, letters, numerrals and borders etc should be as per MoRth specificetion No-801.3.7 The sheeting shall have a pressure - sensitive adhesive of the aggressive - tack type requining no heat , solvet other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angie with nviting Micro primatic type IV Retro reflective sheeting confirming to ASTM D4956-09 shall be Pressure fixed The Retro reflection sheeting shall be tested for a certificate of having the sheeting tested for coefcient of retro reflection daytime colour and luminance, shrinkage, flexiblity, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from intemational/Government Laboratory Institute by the manufacture of the sheeting and in case the certificate is obtained from international Condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Altrnetively, a certificate conforming to ASTM Specification (0 4958-09) on artificial accelereted weathering requirements from a reputed laboratory in India can be a accepted provisionally In such a situation the Employer/Client, If so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same report shall be uploading which quoting tender. The shall include all materials. labour, T&P, transporation , installation and incidentals all complete as per direction of the Engineer - in -Charge. Rate has been taken SOR 2022-23 Agra Circle Page No. 80 MORTH-801

GARIMA SALES CORPORATION

Mohd Anas Ansari