Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹65.4 LAccepted-AOC 85 D GHOSH PARA ROAD BARRAKPORE KOLKATA PIN 700120 | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L1 | Accepted-AOC M/S VP Sanjeev is lowest and accepted | |
| 2 | L2₹69.5 L+₹4.0 L (6.10%)Rejected-Finance SHIV BHAWAN MAGADH COLONY ROAD NO 03 SHERGHATI ROAD GAYA BIHAR PIN 823001 | GAYA | GAYA | BIHAR | 823001 | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹69.9 L+₹4.4 L (6.79%)Rejected-Finance | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹75.3 L+₹9.9 L (15.1%)Rejected-Finance HOUSE NO 413 MAGADH COLONY SHERGHATI ROAD GAYA BIHAR PIN 823001 | GAYA | BIHAR | 823001 | L4 | Rejected-Finance Not lowest | |
| 5 | L5₹75.4 L+₹10.0 L (15.2%)Rejected-Finance 00 ITBAHRA GAUR KANIKAPUR ROAD KANIKAPUR BASTI UTTAR PRADESH 272163 | BASTI | UTTAR PRADESH | 272163 | L5 | Rejected-Finance Not lowest |
Tender Value
₹78 L
EMD Value
₹1.4 L
Closing Date
10 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE RANCHI
HQ CWE RANCHI MES DIPATOLI CANTT PO RMCH RANCHI - 834009
Repair and Maintenance of Certain Road and Footpath at Khojatoli and Namkum area under GE Ranchi
2022_MES_558010_1
80599/1430/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
Ranchi
As per tender documents
5 documents required · 5 mandatory
₹1,000
GE Ranchi
₹1.4 L
Yes
HQ CWE RANCHI
6 Jan 2023
18 Oct 2022
17 Nov 2022
18 Oct 2022
10 Nov 2022
3 Nov 2022
18 Oct 2022 - 26 Oct 2022
26 Oct 2022
Amount
M&L for repair to pot holes any depth n.exc 1.00 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc cutting around edges at least 25mm in depth and applying evenly a tack coat of bitumen (VG-10) @ 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 Sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size making good by filling in screened and graded road metal and well ramming complete all as directed.
M&L for repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal watering and well ramming (including supply of road metal) with 8 tonne power roller complete all as directed.
M&L for premixed bituminous macadam laid/rolled and compacted to required gradient and camber (Consolidated thickness 75 mm or less) using paving bitumen VG-30 with binder content 4% by weight of total mix complete laid by mechanical paver, rolling with static power roller of capacity 8 to 10 ton complete all as directed
M&L for preparing of existing black top surfaces of road by brushing with brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt, etc applying evenly a priming/tack coat with bituminous primer @ 5 Kg per 10 sqm of using VG-10 grade bitumen and applying 40mm thick (Consolidated thickness) bituminous premix asphaltic semi-dense concrete (design mix) with 5.5% binder content (VG-30) by weight of total mix and mixed cement as inert material, laid with mechanical paver, rolled and completed to required camber and gradient with 8 to 10 tone power roller complete all as directed.
Preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm on roads pavements with hot applied thermo plastic road Marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as directed.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick marking strips, straight line, Zebra crossing centre lines, stop lines, dashes, arrows etc. and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262 - 1989 with special applicator machine all as per manufacturers instruction complete all as .directed
M&L for 75mm spread thickness Moorum/red bajri spread, rolled and consolidated to gradient and camber as required complete all as directed.
M&L Moorum/ Red bajri spread rolled and consolidated to gradient and camber required as in berm with the help of hand roller complete all as directed.
S&F road stud reflective type of metal body alloy with PAMA strip lens reflector with MS stud of suitable size fixed with adhesive as per manufacturer’s instructions complete all as directed.Make: Model No DA-972 of Dark Eye or equivalent of 3M/Sun Eyez/ M/s Texla Plastic & Metal Pvt Ltd / M/s Automat Road Safety Pvt Ltd.
Providing and fixing of solar Raised Markers made of polycarbonate molded body with circular shape, solar powered LED self illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 Kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the rage of 0* C to 70* C. Colour of lighting could be provided in red or yellow (amber) as per requirement and typical frequency of blinking is 1Hz. There should be current looses of less than 20 micro-amperes at 2.4 V in sleep charging mode to enhance the life of marker and a full charge should provide for a minimum autonomy of 50 hours. The height width and length of the marker shall be less than 10mmx 100mm x 100mm. Also the surface diameter of the marker shall not be less than 100mm respectively. The weight of the marker shall not exceed 0.5 kilograms. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturers recommendation Complete all as directed. Make : 3M/Mr Illumination/Tata BP
S&F Solar road studs made of aluminum alloy, 100% water proof, with high efficiency mono crystalline solar panel 2.4 V / 0.30 Watt, one Ni-Mh or Ni-cd rechargeable battery (1.2V/1600MA), six super bright LEDs with 10000 to 18000 mcd, bearing weight of 10 tones (appx) fixed as per manufacturer's instructions complete all as directed.Make:- DHRUV of Dark eye or equivalent of 3M / Sun Eyez / M/s Texla Plastic & Metal Pvt Ltd ./ M/s Automat Road Safety Pvt Ltd.
Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as directed
M&L for 100mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in plinth/Hard standing/path etc complete all as directed.
Forming 12mm thick width and 100mm deep Expansion joints filed with bitumen mastic filling comprising of one part of heated bitumen 80/100 grade or VG-10 and three part of sand (all by weight) complete all as directed.
Demolition of Stone sett paving of any description or thickness in floors, apron complete all as directed.
M & L for PCC 1:5:10 type E-2 using 40 mm graded stone aggregates as in foundation filling and mass concrete complete all as directed.
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40grade with approved colour, design & pattern as in foot parth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as directed.
All as per item No 17 here in before but except paver block.Note: Retrieved Paver block shall be used
M & L for machine pressed precast concrete coloured Inter locking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-40 grade with grey cement and pigment, over sand cushion ,over compacted earth complete all as directed.
All as per item No 19 here in before but except paver block.Note: Retrieved Paver block shall be used
M & L for sand filling under paver including watering and consolidation complete all as directed.
M & L for PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in bed block coping benching complete all as directed.
Scarifying or picking up graveled macadam or bituminous macadam surfaces in area n exc 400 Sqm and depth exc 50 mm but n exc 100 mm including separating and stacking serviceable material upto a distance not exc 50 m . Complete all as directed.
Screening road metal, chippings etc on the site of the work, when specially ordered, including removing screened material clear and staking in separate heads for measuring (material from both side of screen measured) complete all as directed.
M&L for WBM 150mm thick (compacted thickness) in TWO layer (Each layer 75 mm thickness) water bound macadam with coarse aggregate of grading 2 (63mm to 40mm size) or of grading 3 (50 to 20 mm size) , of type lime stone , flint or quartzite spread, rolled and consolidated to required level , gradient complete all as directed.
All as per item No 25 here in before but except materials complete all as specified and directed (Note: - Serviceable aggregates obtained form relevant item here - in- before shall be reused).
Preparing WBM surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirts etc. and applying a tack coat of bitumen VG-30 grade @ 10 kg per 10 Sqm for premix bituminous carpet complete all as specified and directed.
Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, seeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirts etc. and applying a tack coat of bitumen VG-30 grade @5 kg per 10 Sqm for premix bituminous carpet, complete all as directed.
Material and labour for bituminous premix asphaltic semi dense concrete (SDAC) 40 mm thick (mixed in central computerized hot mix plant) consolidated thickness with 5.5% binder content by weight of total mix compacted to required camber and gradient using mechanical self propelled paver and rolled with mechanical vibratory power roller 8 to 12 tonnes capacity, complete all as specified and directed.
M/S ABHAY KUMAR AND BROTHERS
SHARDA CONSTRUCTIONS
M/S CHAUHAN CONSTRUCTION
M K Enterprises
Prativa Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .