Repair, Recanning and Polishing to Wooden Chairs, Tables, Sofas and Certain Wooden Furniture under GE (A) Suratgarh at Suratgarh Mil Stn.

Amount

M&L for removing the existing broken or unserviceable components of wooden furniture items as given below from Srl No. 2.00 to 11.00 including preparation, S&F New Ist class hard wood well seasoned teakwood free from cracks and dead knots including two coats of french polish to all replaced components complete to match the original all as specified in drawings and as directed by Engineer-in-Charge :

TABLE PEG (FD-25/384/277)

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

Centre/Side stiffener made of Ist class hard wood (Teak wood).

TABLE DINING FOR 6 PERSONS (FD-239/273/376/FD/MAP-II/03) :

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

Stiffeners made of Ist class hard wood (Teak wood).

S&F of MS corner bracket in right angled shape of size 25x3 mm thick 200mm long with 4 holes duly painted with black enamel paint with suitable MS Screws to the bed as directed by the Engr-in-Charge.

TABLE DINING FOR 8 PERSONS (FD-239/273/376/FD/MAP-II/03) :

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

Stiffeners made of Ist class hard wood (Teak wood).

S&F of MS corner bracket in right angled shape of size 25x3 mm thick 200mm long with 4 holes duly painted with black enamel paint with suitable MS Screws to the bed as directed by the Engr-in-Charge.

TABLE 900X600X760 mm WITHOUT DRAWER (FD-42/284)

Legs Made of 1st Class hard wood (Teak Wood)

Long Rail Made of 1st Class hard wood (Teak Wood)

Short Rail Made of 1st Class hard wood (Teak Wood)

Side lower stiffener/ Centre Bottom Stiffner Made of 1st Class hard wood (Teak Wood)

TABLE 900X600X760 mm WITH DRAWER (FD-41/283)

Legs Made of 1st Class hard wood (Teak Wood)

Long Rail Made of 1st Class hard wood (Teak Wood)

Short Rail Made of 1st Class hard wood (Teak Wood)

Side lower stiffener/Bottom Rail Made of 1st Class hard wood (Teak Wood)

S&F drawer to be made of sides,bottom and back of 12 mm thick prelaminated ext grade MDF board , Front of 18 mm thick prelaminated ext grade MDF board irrespective of whatever shown on drg including SS knobs as approved by Engr-in-Charge.

TABLE 3’ x 3 ‘ (900 x 900 x760 mm)(FD-88(M), FD-291)

Side Rails

Legs Made of 1st Class hard wood (Teak Wood)

TABLE CENTRE (FD - 235/274)

Long rail made of Ist class hard wood (Teak wood).

Short/Bottom Rail Made of 1st Class hard wood (Teak Wood)

Legs Made of 1st Class hard wood (Teak Wood)

Lower Centre Stiffener Made of 1st Class hard wood (Teak Wood)

TEAPOY WOODEN (FD-232/278/382)

Long rail made of Ist class hard wood (Teak wood).

Short/Bottom Rail Made of 1st Class hard wood (Teak Wood)

Legs Made of 1st Class hard wood (Teak Wood)

TABLE DINING FOR 4 PERSONS (FD/MAP-II/03)

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

Stiffeners made of Ist class hard wood (Teak wood).

S&F of MS corner bracket in right angled shape of size 25x3 mm thick 200mm long with 4 holes duly painted with black enamel paint with suitable MS Screws to the bed as directed by the Engr-in-Charge.

TABLE WRITING (FD-33/275)

Legs made of Ist class hard wood (Teak wood).

Side/Bottom Rail made of Ist class hard wood (Teak wood).

Front/Back Rail made of Ist class hard wood (Teak wood).

Centre Stiffener made of Ist class hard wood (Teak wood).

S&F in repair shutters to be made of 18 mm thick prelaminted MDF board of ext grade edging all around with trak wood beading of 4 mm thick with Locking Device,Magnetic Catcher and fixed with piano type hinges/MS Hinges with approved SS knob/Handle.

S&F drawer to be made of sides, back and bottom of 12 mm thick prelaminated ext grade MDF board , Front of 18 mm thick prelaminated ext grade MDF board with 4 mm thick teak wood edging alround irresepective of whatever shown on drg including SS knobs/Handles as approved by Engr-in-Charge.

S&F in replacement of unserviceable back ply shall be 6 mm commercial ply BWR of size as existing.

S&F Cabinet to be made of 18 mm thick prelaminted MDF board of ext grade edging for housing drawers & partition with Shutter as per drawing and as directed by Engr-in-Charge

M&L for removing old unserviceable top of items mentioned below and S&F new top made out of 18 mm thick Ext grade Prelaminated MDF board of approved shade Make : Action Tesa/Novapan/Green panel Max (ISI Marked) including tightening of loose joints of existing frame with 'L' shape zinc plated flat iron of suitable size wherever required before fixing the top of shape and size all as specified on drg and as directed by Engr -in-Charge.

Table Peg (FD-384/277)

Table Dining for 6 Persons (FD-273, FD-376) :

Table Dining for 8 Persons (FD-273, FD-376) :

Table 900X600X760 mm With/Without Drawer (FD-284)

Table 3’ x 3 ‘ (900 x 900 x760 mm)(FD-88(M), FD-291)

Table Centre (FD - 274)

Teapoy Wooden (FD-232/278/382)

Table Dining for 4 Persons (FD/MAP-II/03)

Table Writing (FD-275)

BED HARD WITH PLY TOP ( FD-213/246/247) :

S&F in replacement of unserviceable top of bed Hard Plytop to be made of 12 mm thick (7 Ply) commercial plywood , BWR grade, confirming to IS 303-1989 and ISI marked shape and size, as per drg and directed by Engr-in-charge to be fixed with 25 mm long steel screw without having any joints, Make of ply : KitPly/Green ply/Century

S&F in replacement of unserviceable long rail shall be First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size, all as on drg and as directed by Engr-in-Charge.

All as per Srl Item No. 13.02 above but Short Rail/Stiffener.

HEAD REST : Unserviceable ply to be replaced by 3 mm thick ply wood both sides of Head Board one side teak faced and other side commercial plywood BWR grade general purpose type confirming to IS 303-1989 and ISI marked including teak wood beading all around and 1/2 cut 12 mm dia beading made to shape as shown on drg or directed by Engr-In-Cahrge.

FOOT REST : All as per Srl Item No. 13.04 above but foot rest.

HEAD REST : Dismantling of unserviceable Head rest of Bed ply top, S&F new Head rest complete (well finished with polishing) of bed ply top along with MS angle strip of size 4'x4'x6mm, suitable type of MS Screws. All as per drg and as directed by Engr-in-Charge

FOOT REST : All as per Srl Item No. 13.06 above but foot rest.

S&F of MS corner bracket in right angled shape of size 4"x4", 6 mm thick with Six holes duly painted with black enamel paint after applying the one coat of red oxide primer with suitable MS Screws to the bed as directed by the Engr-in-Charge.

TABLE DRESSING GENTS WITH MIRROR (FD-31/230/379) :

S&F, in repair, unserviceable looking mirror 5mm thick fixed in teak wood frame along with new 6 mm thick commercial plywood back of mirror frame including two coats of French Polish to all parts as per drg and directed by Engr-in charge .

S& F new drawers with box made up of 12 mm thick Exterior grade Prelaminated MDF Board as per drawing.

TABLE BED SIDE (FD-248/276) :

Back ply of Table bed side 6mm commercial ply .

Sides of Table Bed side of Exterior grade Prelaminated MDF Board 18 mm

Shelf of Table Bed side of Exterior grade Prelaminated MDF Board 12 mm

Top/Bottom of Table Bed side of Exterior grade Prelaminated MDF Board 18 mm

Teak Wood Legs (FD - 248) joined with stiffener of 20x40mm

HAT STAND WITH MIRROR (FD-233 ) :

S & F Peg hook aluminium as per drg.

S&F in replacement of unserviceable mirror with new mirror 5 mm thick with teak wood beading around the mirror as existing size.

M&L in replacement of unserviceable front ply and S&F new ply 4 mm thick one side teak faced

M&L in replacement of unserviceable Back ply and S&F new ply 4 mm thick ply.

35x6mm Teakwood Edging

TABLE DRESSING LADIES WITH MIRROR (FD-32(M)/251/378/FD/MAP-II/07) :

S&F, in repair, unserviceable looking mirror 5 mm thick along with new 6 mm thick commercial plywood back of mirror frame.

S&F Glass panes of shutters made of 5mm thick plane glass as existing with aluminium sliding .

New 1st Class hard wood (Teak Wood) Frame for 5mm thick mirror of dressing table ladies complete.

S&F, in repair, unserviceable Back of the Table Made of 12 mm thick Ply wood as shown in Drg.

S& F new drawers as per drawing

S&F new legs as per the drawing

STOOL DRESSING CB (FD- 282/FD/E6MAP/14 ) :

Legs Made of 1st Class hard wood (Teak Wood)

Side/Front rail for seat Made of 1st Class hard wood (Teak Wood)

Centre/Short Stiffeners Made of 1st Class hard wood (Teak Wood)

SIDE BOARD (FD-26 (M),241)

S&F in repair Top/Bottom of side board made out of 18 mm thick prelaminted MDF board of ext grade

S&F in repair Sides of side board made out 18 mm thick prelaminted MDF board of ext grade

S&F in repair door shutters to be made of 18 mm thick prelaminted MDF board of ext grade edging all around with PVC beading of 2 mm thick/Teak wood beading 4 mm thick with piano type hinges with approved SS Handle.

S&F drawer to be made of sides and back of 12 mm thick teakwood Plank , bottom of 6 mm thick commercial plywood , Front of 18 mm thick prelaminated ext grade MDF board whatever shown on drg including SS knobs/Handles as approved by Engr-in-Charge.

S&F in replacement of unserviceable back ply shall be 6 mm commercial ply BWR of size as existing.

SS Knobs / Handles

BIN LINEN MULTIPURPOSE(FD/E6/MAP/09)

S&F in repair Top/Bottom of Bin Linen Multipurpose made out of 18 mm thick prelaminted MDF board of ext grade

S&F in repair Sides of Bin Linen Multipurpose made out 18 mm thick prelaminted MDF board of ext grade

S&F in repair door shutters to be made of 18 mm thick prelaminted MDF board of ext grade edging all around with PVC beading of 2 mm thick with piano type hinges with approved SS Handle.

S&F drawer to be made of sides and back of 12 mm thick teakwood Plank , bottom of 6 mm thick commercial plywood , Front of 18 mm thick prelaminated ext grade MDF board whatever shown on drg including SS knobs/Handles as approved by Engr-in-Charge.

S&F in replacement of unserviceable back ply shall be 6 mm commercial ply BWR of size as existing.

SS handle fancy type 100mm long as approved by Engr-in-Charge

SOFA SET 5 SEATER ( FD-281/373/258)

S & F of the following existing old broken wooden components of various furniture items or similar items carefully without distrubing the adjoining parts and providing new components of 1st grade teak / sheesham wood in lieu of dismantled components including tightening the joints, pinning, nailing, glueing placing every part in tact complete all as specified and directed by Engr-in-Charge

Arms (75mmx35mm of 720mm long)

Legs (75mmx35mmx300mm long)

Batten (50mmx20mmx525mm long)

Supply of cushion 100mm thick 32 density covered with tapestry cloth secured with a concealed high quality zipper for easy removal as approved and directed by Engr-in-charge. Note: Tepastry cloth samples minimum 6-9 should be submitted for prior approval of GE/BSO and as per direction of Engr-in-Charge cushions shall supply. Make of cushion: Sleepwell / Kurlon

SOFA SET 4 SEATER ( FD-281/373/258)

S & F of the following existing old broken wooden components of various furniture items or similar items carefully without distrubing the adjoining parts and providing new components of 1st grade BWR teak / sheesham wood in lieu of dismantled components including tightening the joints, pinning, nailing, glueing placing every part in tact complete all as specified and directed by Engr-in-Charge

Arms (75mmx35mm of 720mm long)

Legs (75mmx35mmx300mm long)

Batten (50mmx20mmx525mm long)

Supply of cushion 100mm thick 32 density covered with tepastry cloth secured with a concealed high quality zipper for easy removal as approved and directed by Engr-in-charge. Note: Tepastry cloth samples minimum 6-9 should be submitted for prior approval of GE/BSO and as per direction of Engr-in-Charge cushions shall supply. Make of cushion: Sleepwell / Kurlon

CHAIR DINING ( FD - 16 (M) /FD - 279/FD/MAP-II/05)

Rear Legs Made of 1st Class hard wood (Teak Wood)

Front legs Made of 1st Class hard wood (Teak Wood)

Stiffners Made of 1st Class hard wood (Teak Wood)

Bend Stiffners for back rest Made of 1st Class hard wood (Teak Wood)

Side rails Made of 1st Class hard wood (Teak Wood)

PVC Seat for chair dining Drg- FD/MAP-II/05

CHAIR WRITING ( FD - 20 (M) FD - 280) :

Rear Legs Made of 1st Class hard wood (Teak Wood)

Front legs Made of 1st Class hard wood (Teak Wood)

Side rails Made of 1st Class hard wood (Teak Wood)

Arms Made of 1st Class hard wood (Teak Wood)

Stiffners Made of 1st Class hard wood (Teak Wood)

CHAIR EASY (FD - 17 (M) FD - 229) :

Legs Made of 1st Class hard wood (Teak Wood)

Side rail for seat Made of 1st Class hard wood (Teak Wood)

Front/Back Rail for seat Made of 1st Class hard wood (Teak Wood)

Arms Made of 1st Class hard wood (Teak Wood)

S&F in replacement of unserviceable PVC shoe with new Hard Rubber Ring shoes of 25mm dia of best quality as approved for item Srl No. 2.00, 8.00,9.00,11.00,15.00,18.00,23.00,24.00 & 25.00 shoes should fixed with screws complete all as specified and as directed by the Engineer-in-Charge .

S&F Wooden Corner Brackets of size 50x50x20mm in Item Sr No 2.00,8.00 & 9.00

S&F Wooden Corner Brackets of size 75x75x25mm in Item Sr No 5.00 & 6.00

S&F Wooden Corner Brackets of size 100x100x25mm in Item Sr No 7.00 & 11.00

S&F Wooden Corner Brackets of size 100x100x35mm in Item Sr No 10.00 & 13.00

Labour for removing the U/S worn out / broken cane & re-canning with new plastic cane of not less than 1.8 mm wide x 0.46mm thick and border caning atleast 3.5mm wide as per Godrej pattern including total scrubbing & cleaning of surfaces tightening the frame for chair dining, chair writing, chair easy, stool dressing, Bin soiled linen, etc. Complete all as specified and as shown in drgs. and as directed by Engineer-in-Charge.

S& F New MDF Sheet of thickness 3mm, Make : Action Tesa/ Green Panel Max on old outer Surface of Side Board, Bin Linen Multipurpose, Table Dressing Ladies etc

Labour for cleaning, mild grinding and preparation of old treated wooden surfaces of any description,filling of cracks with putty including tightening of loose joints if any and applying two coats of french polish for the following wooden furniture all as shown in drgs in any colour/shade as directed by Engineer-in-Charge (including polishing at site)

Bed plywood top FD - 213/246

Chair Easy FD - 17/229

Chair Writing FD - 20(M)/280

Chair Dining FD - 16/279/MAP

Table dining 6 pers FD-30/239/273

Table dining 8 pers FD-30/239/273

Table 900x600x760mm w/drawer FD-41/283

Table 900x600x760mm w/o drawer FD-42/284

Table 900x900x760mm FD-88(M)/291

Table writing FD - 33/275

Peg table FD - 25/277/384

Table bed side FD - 28/276/248

Table dressing Gents FD-230/382/379

Table dressing Ladies FD- 251

Table centre FD-235/274

Side Board FD 26/241

Sofa set 5 seater FD - 281/373/258

Sofa set seater 4 Seater chair ( FD-281/373/258)

Stool dressing FD 27/252

Hat stand FD-206/233/362

Teapoy wooden FD-232

JAIN TRADERS (BID ID -3312158)