SPECIAL REPAIRS TO PRINCIPAL RESIDENCE, STAFF QUARTERS, PROVN OF KOTA STONE FLOORING IN CHEM LAB, CLASS ROOMS, LIBRARY AND INTERLOCKING TILES NEAR CYCLE STAND AT KV AURANGABAD UNDER GE (S) AHMEDNAGAR

Amount

Demolition of cement concrete (un-reinforced) in ground floor and pavings n.exc 15 cm thickness, (above or below ground level) all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles all as specified and as directed.

Taking down chowkats or frames, area n.exc 1.5 Sqm each (without taking off shutters from frames) all as specified and as directed.

Taking down shutters of any description area exc 1 Sqm but not exc 2 Sqm each leaf all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviciable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling stone slabs/Cudappah/Kota stone slab of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified and as directed

Taking down cement or cement lime plaster on brick/stone walls etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Surface excavation in hard/dense soil not exeeding 30cm deep and avgeraging 15cm deep and getting all as specified and as directed.

Excavation in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations, etc. or for manholes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil all as specified and as directed.

Returning, filling in (soil), including spreading, levelling, watering and well ramming in layers not exc 25cm thick all as specified and as directed.

Removing excavated soil to distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

M&L for hard core of gauge not exceeding 63mm, deposited, spread, levelled in layers not exc 15cm thick, watered and rammed to a true surface using broken stone boulders complete all as specified and as directed

M&L for precast cement concrete, 1:2:4, type B-1, using 20 mm graded stone aggregates as in kerb stones of size 300 x 150 x 300mm and the like machine made with plain faces including necessary forms, moulds etc and finishing concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6m mean redius, built in cement mortar 1:6 complete all as specified and as directed.

S&F 35mm thick second class hardwood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified & as directed.

S&F 35mm thick second class hardwood factory made, plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated and fixed complete all as specified and as directed.

S&F factory made PVC solid, single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening all as specified in SSR part-II 2010 Section-8, clause 8B.3 complete all as specified and as directed.

S&F factory made solid PVC moulded door shutters, 28 to 30mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifications & drawing given in SSR complete all as specified and as directed.

S&F 75 mm size butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and as directed.

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and as directed.

S&F Aluminium anodised tower bolt of extruded section, 150 mm size, complete all as specified and as directed.

S&F Aluminium anodised tower bolt of extruded section, 200 mm size, complete all as specified and as directed.

S&F Aluminium handle, cast type anodised, 125 mm size, fixed complete all as specified and as directed.

S&F Aluminium handle, cast type anodised, 150 mm size, fixed complete all as specified and as directed.

S&F 250mm long aluminium sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed.

S&F in repairs countinuous (piano) hinges, 30mm width flaps, (when opened) mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S&F 300 mm long mild steel, ordinary rat tail rod pattern helical door spring including roller and roller plate complete all as specified and as directed.

S&F in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges, brass chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats. complete all as specified and as directed.

S&F in repairs, harrison curtain rails, 20mm dia, anodised aluminium alloy, Chromium plated with and including brackets suitable for 20mm curtain rails and fixed to walls with screws etc., complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and as directed.

S&F Aluminium anodised powder coated frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed.

S&F Aluminium anodised powder coated window 3 track sliding shutters, without sash bar, aluminium section weighing 0.55 kg/m (Minimum) including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading, screws etc complete to be fixed with 5.5mm itched glass and netlon wire mesh including taking down existing windows etc complete all as specified and as directed .

M&L for water proofing treatment to RCC roof slab, parapet, chajja etc comprising with the following treatment/specification from bottom to top including taking down/demolition existing decayed water proofing treatment with plaster/PCC padding of any thickness on roof:- (i) Taking out old bituminous felt roof treatment including plaster/PCC padding and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish n exceeding 500 mtr distance from starting point. (ii) 25mm thick(average) PCC type B-0,(1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement mixed with WPC @ 3% by weight of cement. (iii) Cleaning of roof surface and applying one coat of cold bituminous primer @ 0.30 ltr /Sqm conforming to IS:3384-1986. (iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm. Note: Water proofing compount will be measured & paid seperatly.

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaing out and filling solidly with a hot mixture of bitumen and clean dry sand in ratio 1:1 (by weight) all as specified and as directed.

Supply only integral water proofing compound, ISI mark all as specified and as directed.

S&F in repairs 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination including first class hard wood wooden beading on all sides, fixed with screws to timber frame work/wall for shutter and pelmet boxes, complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4, type B0 (using 12.50 mm graded stone aggregates) as in sub-base complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8, type D2 (using 40 mm graded stone aggregates) as in sub-base complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub-base complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregates) as in plinth protection, finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for 18 to 20mm thick granite (table rubbed and polished) in steps, jambs, pillars, window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match the shade of granite complete all as specified and as directed.

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed rendering in CM 1:6 complete all as specified and as directed

M&L for glazed ceramic coloured tiles of size 350mm x 250mm x 7 mm / 450mm x 350mm x 7mm thick on vertical surfaces such as in skiting/dado over 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.

M&L for light colour vitrified tiles, 10mm thick (Square or rectangular), area of each tile exc 0.36 Sqm but n exc 0.42 sqm as in floors, set and jointed in neat cement slurry & pointed in white or coloured cement to match colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

All as per serial item No.44 but on vertical surfaces such as skirting/dado, laid over 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.

M&L for machine cut kota stone flooring, 20-25 mm thick (Minimum size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer of cement mortar 1:6 jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.

All as per serial item No. 46 but 18 to 20 mm thick kota stone on vertical surfaces such as in skiting /dado of size as required at site over and including10 mm thick backing coat of cement mortar (1:4) complete all as specified and as directed.

M&L for 80 mm thick precast cement concrete interlocking tiles (glossy finish/ rubber matt finish) hydraulically pressed cemented tiles of grey colour with pigments, (glossy finish/ rubber mat finish) factory made, M-40 grade as in floor laid over & including 25 mm thick sand cushioning and including filling of interstices with fine sand complete all as specified and as directed. Note Size, shape & pattern of tiles shall be as approved by GE.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set and jointed and pointed in neat cement slurry with grey cement and pigment in floors, over and including 20mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces (external plaster), finished surfaces even and fair all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces (Internal plaster), finished surfaces even and smooth without using extra cement all as specified and as directed.

M&L for preparing new plastered surface of walls and applying two coats of oil emulsion distemper over one coat of chalk whitining complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls applying two coats of cement base paint over a coat of primer all as specified and as directed

M&L for preparation of old plastered surfaces of walls applying one coat of cement base paint all as specified and as directed

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means including filling depressions of scrapped surfaces and making surfaces smooth with wall care putty and applying two coats of oil bound distemper over one coat of chalk whitining complete all as specified and as directed

M&L for preparing new surfaces of wood and wood based materials of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed

S&F GI steel tubing, 15mm bore medium grade with and including all fittings and fixed to walls or laid in floors including taking out existing GI tubing complete all as specified and as directed.

S&F GI steel tubing, 20mm bore medium grade with all fittings and fixed to walls or laid in floors including taking out existing GI tubing complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 1000 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, (minimum weight 210gm), high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting including taking down existing water tank all as specified and as directed.

S&F in repairs 15mm bore bib taps fancy type, chromium plated, cast copper alloy with crutch or butter handle, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs stop valves, fancy type 15 mm bore, chromium plated cast copper alloy, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs stop valves, 20 mm bore, cast copper alloy, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs, brass chromium plated swivel shower rose, 125mm size, including shower arm fixed to steel pipe and union, complete all as specified and as directed.

S&F in repairs chromium plated health faucet with 1 metre long flexible tube and hook fixed to wall complete all as specified and as directed.

S&F in repairs, 32mm bore of pipe low density polythene pipe (LDPE) of pressure rating 6Kgf/sqcm fixed to wall or laid in floor etc including fittings complete all as specified and as directed.

S&F in repairs, PTMT grating doom 125mm dia with waste hole (Minimum weight 40gms) and fixed complete all as specified and as directed.

S&F in repairs, vitreous china wash hand basin, white, flat back, size 580mm x 450mm with and including brackets, 15mm bore brass chromium plated fancy type pillar tap with capstan head, 32 mm waste coupling brass chromium plated suitable for wash hand basin with long screwed shank and fly nuts, rubber washers and 32mm bore PVC waste pipe, 15mm dia and 600mm long PVC connection, fixed in position complete all as specified and as directed.

S&F in repairs water closet, vitreous China, Orissa pattern, size 580mm x 440mm, white with integral foot rest including `P' or `S' trap & connections to flushing pipe, anti syphonage pipe etc complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan (Padestal pattern) any colour, P or S trap with and including plastic seat cover white colour with connections and fixed complete all as specified and as directed.

S&F in repairs 450mm long PVC connection, 15mm size with PTMT nuts complete all as specified and as directed.

S&F in repairs, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with Chromium plated bracket guard and railing 60cm long complete all as specified and as directed

S&F in repairs, wall corner sheet glass shelf assembly, size 12"x12" with 10mm thick toughned glass with all fittings complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern, 10Ltrs capacity including ball valve, bracket inlet, PVC pipe, PVC connection 600 mm long etc. fixed in position complete all as specified and as directed.

S&F in repairs, sink with drainage board made of 1mm thick stainless steel sheet, kitchen or laboratory with plugs, washers and wastes ; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm with and including 40mm bore waste pipe and chromium plated waste coupling with rubber washers complete all as specified and as directed.

S&F in repairs PVC (SWR) pipes single socketed 75mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs PVC (SWR) pipes single socketed 110mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repairs PVC (SWR) bends 75mm dia with access door complete all as specified and as directed.

S&F in repairs PVC (SWR) bends 110 mm dia with access door complete all as specified and as directed.

S&F in repairs, 75 mm dia PVC (SWR) nahani/floor trap with grating including jointing to waste pipe with solvent cement complete all as specified and as directed.

Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc all as specified and as directed.

M&L for point wiring (Light Point/fan Point) complete with 1.5 Sqmm single core, multistranded, copper conductor FRLS, PVC insulated and unsheathed cable 650/1100 volts grade, confirming to IS-694 1990, drawn through and including PVC casing capping of size 25 mm /20 mm dia with all accessories as specified with modular cover plate with frame and modular metal flux boxes/rectangular PVC board for mounting fitting & fixtures like switches sockets and fan regulators etc including copper earth continuity wire for PVC insulated of size 1.5 Sqmm for one light Point controlled by one way Switch complete all as specified and as directed

All as per item No-83 but for bell point with cables 1.5 Sqmm complete all as specified and as directed

All as per item No 83 but for 5 Amps socket on same board with 1.5 sqmm cable complete all as specified and as directed

All as per item No 83 but for 5 Amps socket on independent board with 1.5 Sqmm cable complete all as specified and as directed

All as per item No 83 above but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board including one run 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall including PVC box 2 mm complete all as specified and as directed

All as per item No 87 but for 2 way switches with 1.5 Sqmm cable controlled by two switches complete all as specified and as directed

S&F modular switch, single pole one way 6/10 Amps 1 module complete all as specified and as directed

S&F modular switch single pole one way 16 Amps 1 module complete all as specified and as directed

S&F modular socket 6 amp-2/3 pin combined 2 module complete all as specified and as directed.

S&F modular socket 6 A/16 amp -2/3 pin combined 2 module complete all as specified and as directed.

S&F modular switch 2 way 1 module complete all as specified and as directed

S&F modular fan regular, step type 120W 2 module complete all as specified and as directed.

S&F LED light fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED light fitting 1x10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten/pendant fitttings complete all as specefied and as directed

S&F lamp LED 9/10 Watt, 230 volts 50 Hz AC complete all as specified and as directed

S&F LED light fitting 1x9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F ceiling rose surface bakelite three terminal type complete all as specified and as directed

S&F electrical bell (multi music type), AC, 230 Volts complete all as specified and as directed

S&F electrical bell push modular type 6 Amp complete all as specified and as directed

S&F in replacement of old unserviceable MCB DB double door 4 way SPN with suitable rated busbar 240 V complete all as specified and as directed.

S&F in replacement of old unserviceable MCB DB double door 4 way TPN with suitable rated busbar 415 V complete all as specified and as directed.

S&F in replacement of old unserviceable MCB DB double door 6 way TPN with suitable rated busbar 415 V complete all as specified and as directed.

S&F in replacement of old unserviceable MCB DB double door 12 way SPN with suitable rated busbar 240 V complete all as specified and as directed.

S&F in repairs MCB single pole 240 volts 6 to 32 Amps "C" complete all as specified and as directed

S&F in repairs MCB SPN 240 Volts 40-63 Amps "C" curve complete all as specified and as directed

S&F in repair MCB TPN 415 Volts 63-100 Amps "C" curve complete all as specified and as directed

M&L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 2.5 sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building / quarter as ordered and testing on completion including taking down old submain wiring and any type of casing/caping complete all as specified and as directed. Note : Two runs of 4 sqmm cable, one run of 2.5 sqmm cable and one run of PVC casing caping shall be measured as one unit.

M&L for sub main wiring with 2 runs of 6 Sqmm, single core, PVC insulated & unsheathed cable, conforming to IS-694, 1100 volts with copper conductor, multi stranded, drawn in and including suitable size casing / caping (ISI marked) with all accessories such as Tees, Elbows, junction box etc as requied alongwith one run of 4 Sqmm single core PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of casing/caping, complete all as specified and as directed. Note : Two runs of 6 Sqmm cable, one run of 4 Sqmm cable and one run of PVC casing/caping will be measured as one Rm unit.

S&F in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and as directed

S&F in replacement 35/40 Watt building mounted LED security light fitting complete made up of pressure die cast housing with toughned glass and individual high power LED with secondary optics, IP66 protection and impact resistance of IK07 & 10KV external SPD, including GI bracket made out of GI pipe 40/50 mm bore, medium grade pipe 1.2 m long bend to shape required fixed to pole / wall with 02 Nos mild steel clamps made out of flat iron 40 x 5 mm including nuts, bolts and washer, painting with two coats aluminium paint over a coat of primer, suitable for LED fitting, complete all as specified and as directed

Supply and fix LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete., including GI bracket made out of GI pipe 40/50 mm bore, medium grade pipe 1.2 m long bend to shape required fixed to pole / wall with 02 Nos MS clamps made out of flat iron 40 x 5 mm including nuts, bolts and washer, painting with two coats aluminium paint over a coat of primer, suitable for LED fitting, complete all as specified and as directed

Supply, laying and testing 35 Sqm 3.5 core, XLPE Insulated, PVC sheathed cable, confirming to relevant IS, ISI marked, earthed system ,armoured heavy duty ,electric cable with aluminium conductor, 1100 volts grade ,in trenches /wall/floor/pole complete and making connection including suitable size of aluminium lugs and taking out existing cable and cable covers complete all as specified and as directed.

Supply, laying and testing 50 Sqm 3.5 core, XLPE Insulated , PVC sheathed cable , confirming to relevant IS, ISI marked ,earthed system ,armoured heavy duty ,electric cable with aluminium conductor,1100 volts grade, in trenches /wall/floor/pole complete and making connectionincluding suitable size of aluminium lugs and taking out existing cable and cable covers complete all as specified and as directed.

Supply and spreading sand for cusioning for electric cable 8 cm below the cable and 15 cm above the cable, including hand punning complete all as specified and as directed. Note : Punned thickness only shall be measured and paid.

Supply and laying in replacement of unreinforced precast concrete cable cover class LV type-1 flat size 250 mm x 150 mm x 40 mm complete all as specified and as directed.

S&F in replacement GI tubing light grade of 40 mm dia for cable protection on pole/wall/floor/ or in trenches and drain etc complete with necessary clamp, nut, bolts and washers and socket and making good the disturbed surface of wall , floor or roof etc all as specified and as directed

M&L in repair/replacement for earthing complete with galvanized steel earth plate electrode of size 60cm x 60 cmX 6 mm buried directlyin the ground to a depth not less than 2.25 mtr with top edge not less than 1.5 mtr below GL connected to and including GI earth wire 4mm dia and GI Pipe 15 mm dia GI pipe light grade and connected to main distribution board/earthing test point all as shown in electrical plate No 5 of SSR Part -I and all as specified including testing on completion. Notes The unit rate also including for excavation, earth work in type strata, plain cement concrete 1:3:6 mix type C1 pit, 40 mm thick RCC B78: light 1:2:4 Mix, type B1 cover reinforced with 8 mm dia TMT bars @ 150mm c/c both ways, GI funnel with watering pipe, wire mesh, protection pipe for earth lead upto 7.50 m long complete in addition to item No 1 (a) to (e) preambles (notes) under sub heading earthing, specified in SSR part II complete all as specified and as directed.

ASHWAMEDH ENGINEERS

D V Engineers and Contractors Pvt Ltd

NATHKRUPA CONSTRUCTION

M/S Tirupati Goroba Shendge