11 KV Line Construction Work and installation of 11 KV and 33 KV RMU Under EUDD-Bamrauli, Mayohall and Tagore Town, Prayagraj.

Amount

Details of work

Errection , Grouting and Plinthing of 9/11 Mtr. long STP/PCC pole. Grouting in ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr. with cement, coarse sand & brick blast in ratio 1:4:8 and 12 mm thick plastering around the plinth in ratio 1:2:4 with 12 mm thickness curing of plinth should be done properly for 11 KV line (Grouting & plinthing required materials will be provided by the contractor.)

Erection of 11 Mtr. long STP Double pole including fixing of all necessary clamps, other accessories like Top channel, Cross bracing angle (Required materials like Clamps, nut & bolt, M.S. Channel, Base Channel, M.S. Bracing Angle etc. as per site requirement will be arranged by the contractor.)

Earthing of support complete with the help of M.S. rod 16 mm dia and 2.5 mtr. long, fastening of G.I. wire with clamps/X-arm/ support to M.S. earth rod as per Resspo and Electrical Safety rule (All required Material will be arranged by contractor).

Painting of ST pole 9/11 Mtr with the help of one coated red oxide & alluminium paint. (All required Material will be arranged by contractor).

Erection & grouting of stay Rod with Cement, Sand and Bricks ballast in ratio 1:4:8 and fastening the stay wire with pole and stay rod nuzzling.(Grouting required materials will be provided by the contractor.)

Hanging of XLPE 3x70/120/185 sq mm cable at existing & Newly Constructed 9/11 Mtr. Long PCC/STP/Rail pole with the help of stay wire and stay clamp. (Stay clamp for suitable pole with nuts & bolt provided by contractor)

Laying of 11 KV 3x70/120/185 sq mm XLPE cable by HDD Machine Drill method with HDPE Pipe. The cable shall be laid below not less than the depth of 1050 mm from the surface of road (HDPE pipe 6 inch with clamp provided by the contractor)

Fixing H.S. type 11 KV 3X70/3X120/3X185 sqmm O/D, I/D cable joints & end terminations.(All Material to be provided by contractor).

11 Kv 3X70/3X120/3X185 sqmm outdoor box

11 Kv 3X70/3X120/3X185 sqmm s/t box

Hoisting of 11 KV 3x120 sq mm XLPE cable providing GI pipe of size 8” dia 3 M long on double pole including its jumpering, complete with Channel and clamps, nut & bolts. As per Resspo and Electrical safety rules. (All material porvided by contractor except 11 KV cable)

Erection & commissioning of 11 KV VCB outgoing in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. Fixing of 11 KV switchgears rag bolt with proper connection, & earthing with GI Strip 50x6mm , control cable & Earthing Materials by contractor. 11 KV VCB provided by Deptt.

Installation of Danger board with clamp and nut bolt, Number plate with clamp and nut bolt & Barbed wire at each pole (all required material will be provided by the contractor).

Cartage of 11/9 Mtr STP/PCC POLE from Store to dump store/work Site Including loading and unloading

Cartage of 3X185, 3x120, 3x70 SQ MM xlpe 11 KV XPLE CABLE from Store to dump store/work Site Including loading and unloading

Cartage of 11 kV outgoing vcb from Store to dump store/work Site Including loading and unloading

Construction of RMU foundation with cable trunch as per site required All require material provided by contractor.

Errection and Commissioning of 11 kv 3 way Ring Main Unit & all connection with the help of 11 KV cable, cable jointing kit & other releted works ie of RMU Panal etc at site and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. Work includs fitting of all accessories in all respect with complete connection of control cable with pannel. All require material (grouting material, control cable, nut bolt off size etc will be provided by the Contractor except 11 KV cable.

Earthing of 11 KV RMU Complete by 40 mm dia 2.5 Mtr. Long G.I. pipe electrodes by digging 3 Mtr. deep pits , making alternate layer of salt & charcoal and connecting with GI Strip of size 25x6 mm with clamps, Testing of earthing as pr rule ofter complete this work result will be satisfactory then connect all connection properly (All material related this work will be arranged by the contractor at his own cost) NOTE - Attached technical specification & photo

Fixing of jointing kit Heat Shrink cable type end Terminations suitable for 11 KV, 3x120 sq mm XLPE cable. As per Resspo and Electrical Safety rule) including jointing kit. (All material porvided by contractor)

Outdoor/indoor jointing kit 3x120 sq mm

Laying of 11 KV 3x120 sq mm XLPE cable by by manual method from RMU unit to existing 11 kv line . The cable shall be laid strictly in compliance to RESSPO Norms . (All required material except 11 KV Cable provided by Contractor)

Cartage of 11 KV, 3x120 sq mm XLPE cable from Store to dump store/work Site Including loanding and unloading

Cartage of 11 KV, 3 way RMU unit from Store to dump store/work Site Including loanding and unloading

Construction of RMU foundation with cable trunch as per site required . All require material provided by contractor.

Errection and Commissioning of 33 kv 3 way Ring Main Unit & all connection with the help of 33 KV cable, cable jointing kit & other releted works ie of RMU Panal etc at site and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. Work includs fitting of all accessories in all respect with complete connection of control cable with pannel. All require material (grouting material, control cable, nut bolt off size etc will be provided by the Contractor except 33 KV cable.

Earthing of 33 KV RMU Complete by 40 mm dia 2.5 Mtr. Long G.I. pipe electrodes by digging 3 Mtr. deep pits , making alternate layer of salt & charcoal and connecting with GI Strip of size 25x6 mm with clamps, Testing of earthing as pr rule ofter complete this work result will be satisfactory then connect all connection properly (All material related this work will be arranged by the contractor at his own cost) NOTE - Attached technical specification & photo

Fixing of jointing kit Heat Shrink cable type end Terminations suitable for 33 KV, 3x300 sq mm XLPE cable. As per Resspo and Electrical Safety rule) including jointing kit. (All material porvided by contractor)

Outdoor/indoor jointing kit 3x330 sq mm

Laying of 33 KV 3x300 sq mm XLPE cable by by manual method from RMU unit to existing 33 kv line . The cable shall be laid strictly in compliance to RESSPO Norms . (All required material except 33 KV Cable provided by Contractor)

Cartage of 33 KV, 3x300 sq mm XLPE cable from Store to dump store/work Site Including loanding and unloading

Cartage of 33 KV, 3 way RMU unit from Store to dump store/work Site Including loanding and unloading

M/s Gayatri Enterprises (BID ID -4790441)