REPAIR TO JOINERY, PLUMBING, TILING, FALSE CEILING, PLASTERING AND PERIODICAL SERVICES AT VIP AREA AND B ZONE AREA AND CERTAIN OTHER MISC UNITS UNDER AREA AGE B/R-I OF GE BENGDUBI

Amount

SCHEDULE 'A'

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) area not exc. 1.5 sqm complete all as specified and directed.

Taking down chowkhats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each and removing form site of work complete all as specified and directed.

S&F Pressed steel door frame of size 105 x 65mm for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate, etc. complete all as specified and directed.

S&F Pressed steel frames frame size 165X60mm for doors with one or more rebates including necessory fixing lugs, hinges, lock strike plates etc, complete all as specified and directed.

S&F of 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class HW 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. plain, chamfered or rounded, mitred and rebated sash bars, any numbers, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S&F steel windows with side hung double shutter (one for glazing and other for mosquite proofing) including projection type hinges with steel handle, and steel pag stay, complete with guard bars, dovetailed or welded complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of apertune 1.40 mm and fixed with tinned tacks or galvanised wire staples including necessary beading complete all as specified and directed.

Hacking out old broken glass (any thickness size quality and discription) for metal frame including punching, drilling out old glazing pins / spring clips and providing new ones complete all as specified and directed.

S&F frosted on one side 4 mm thick and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed.

M&L preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of primer red oxide primer including preperation of surfaces complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, with particle board core as per specification & drawing complete all as specified and directed.

All as per item no 18.00 but wire guazed i.e.panel will be of wire guage in lieu of PVC sheet panel. (Note:- The wire guaze shall be wrapped on an additional square 8 mm MS solid tube and this tube shall be welded to MS tubes. The wire guage shall be stretched to tighten firmly).

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F floor door stopper of brass body 140 mm long and tongue with rubber shoes, fixed in floor complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 150 mm for PVC doors complete all as specified and directed.

S&F stainless steel butt hinges medium weight 100mm in size for PVC doors complete all as specified and directed.

S&F 150 mm aluminium handles cast type anodised complete all as specified and directed.

S&F 200 mm size mild steel barrel tower bolts of stove enamelled and fixed all as specified and directed

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

M&L for Providing precast cement concrete 1:3:6 type C0 (using 12.5 mm graded crushed stone aggregate) set in cement mortar (1:4) louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame complete all as specified and as directed.

S&F Powder coated Anodised aluminum frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specifed.

S&F for Powder coating anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

S&F for Powder coating anodised aluminium window and ventilator shutters, side hung type without sash, aluminium sections weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, anodised aluminum snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.) hinges type B-21 100 mm long (2 no) suitable handle (1 no) etc complete all as specified and directed.

S&F Powder coated for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminum snap beading, screws etc. complete all as specified and directed. (Note for item no. 28.00 to 31.00:- Powder coating of any colour (Thickness or powder coating not less than 50 micron).

M&L any size mesh aluminium anodised grills of approved designs complete all as specified and directed. (Note :- Size and pattern of mesh shall be approved by GE).

S&F mortice lock vertical type barss 100mm size 4 levers complete all as specified and directed.

S&F double action floor spring hydrualically regulated made up of minimum 12.5 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M& L for 5.5 mm thick sheet glass ordinary quality frosted or one way including glazing clips, rubber packing etc exc. 0.5 sqm in each pane complete all as specified and directed.

S&F stainless steel curtain rails 20mm dia of approved pattern and best quality complete all as specified and directed.

S&F stainless steel curtain brackets for curtain rod complete all as specified and directed.

S&F stainless steel side bulb for curtain rod complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/ blankets any thickness, including cover fillets all as specified and directed.

S&F suspended false ceiling using anodised GI Exposed ceiling suspension system perimeters channel 0.55mm thick having web of 27mm and flange of 30mm on one end 20mm on other and fixed to wall with the help of nylon sleeves and providing fixing Gypsum board 12mm thick in ciling fixed with screw and GI frame and finished surface and finishing surface attachment and finnaly board have tobe jointed and finished look with POP to have a flush look using jointed compound/tape painting etc all as specified as directed.

M&L for pop border of approved design completed all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings.

S&F Pre painted galvalume aluminium Zinc coating GI based trapezoidal profile (pitch 200mm and profile 30mm) steel sheet thickness in between 0.4mm to 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / Cladding to wall,/ridges etc fixed with self tapping screws complete all as specified and directed.

S&F of thickness 0.56mm Plain, Aluminium sheeting, alloy as in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and in any position complete all as specified and directed.

S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 W (Gde-E-250 quality - A) complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing and rubbish off the premises.

M&L for non skid ceramic tiles joint free coloured tiles 7mm to 8mm area exceeding 0.11sqm but n.exc 0.18 sqm on floors over and including 15mm thick screed bed in cement mortar (1:6) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

M&L for designer stone finished glazed coloured ceramic wall tiles with digital technology 300 x 450 / 150 x 450 mm size, 7 mm thick on walls over and including 10mm thick plastering in cement mortar (1:4) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed. Make - Kajaria

M&L for Vitrified ceramic tiles (light shade/double charged/ultra charged) 10 mm thick (square / rectangular) polished, area of each tiles n.exc 0.42 Sqm but n.exc 1.00 Sqm, in floor etc. set and jointed and including 20mm thick screed bed in cement mortar (1:6) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

Ditto all as per item No 50.00 here in before but as in skirting.

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site all as specified and directed.

M&L for PCC 75mm thick 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in floor, path etc finishing the surface rough to receive tilies complete all as specified and directed.

M&L for pre polished coloured cement concrete chequred tile of approved quality size 300X300X 25mm thick on floors over and including 20 mm thick screed bed cement mortar 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

M&L for providing Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L 25mm thick sand cushioning under floor including levelling all as spd and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) in flooring complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (Using 40mm graded crushed stone aggregates) as in plinth protection finished even and smooth using extra cement, joints to be given every 3m interval and corners of buildings and fitted with biyuminious mastic or equivalent filler complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in cooking platform laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20-25mm thick machine cut kota stone slab flooring over 20 mm thick cement screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including including rubbing and mirror polishing complete all as specified and directed.

Ditto all as item no 60.00 here-in before but in skirting on backing coat of cement mortor 1:4 complete all as specified and directed.

M&L Granite slab 20 mm thick machine cut bedded and jointed with grey cement and pointed with white cement and adhesive of pigment to match the shade incl cutting and polishing complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L for old size fly ash brick work with sub class 'B' bricks, straight for curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for old size fly ash brick work with sub class 'B' bricks, straight for curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster of any description in any position incl racking out joints hacking for key, scrubbing down with water etc and removal of debris from site all as specified and directed.

M&L rendering in CM 1:4 on walls 15mm thick on fair faces of brick work finished the surface even and smooth with out using extra cement complete all as specified and directed.

M&L rendering 15mm thick on other than fair faces in cement mortar 1:6 finished the surface even and and smooth with out using extra cement complte all as specified.

M&L rendering 5 mm thick in cement mortar 1:3 over/soffit of chajja finished surface even and smooth with out using extra cement all as specified and directed.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer including preparing surface even and smooth complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper preparing surface of wall even and smooth over and smooth appying with 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat white wash complete all as specified and directed.

M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of cement based paint (any tint) on walls complete all as specified and directed.

M&L for one coat of oil bound distemper (washable) on old surfaces of wall including preparation of old undecorated surfaces complete all as specified and directed.

M&L for preparation of old painted wooden surfaes of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint any tint complete all as specified and directed.

M&L for preparation of old painted wooden surfaes of any description n.exc 10 cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

M&L for preparation of old wall painted surface and apply two coats of plastic emulsion paint over a coat of primer with 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of old wall painted surface and apply two coats of Apex paint over a coat of primer with 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

M&L for preparation of old painted steel surfaces of any description n.exc 10cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

M&L for preparing plastered or unplastered old surface of walls including brooming down or scrapping down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spots and applying one coat of white (Lime) wash on wall complete all as specified and directed.

Ditto all as item No. 81.00 here-in-before but applying one coat of white (Lime) wash on ceiling complete all as specified and directed.

Rewriting repainting existing writing letters or figures (block roma, roman, italic, Indian n exc 30 cm height) complete all as specified and directed.

Uprooting of vegetation growth from walls, roof chajja gutter cleaning the surface and making good holes with cement mortar (1:3) each hole not exceeding 0.10 Sqm complete all as specified and directed.

Dismantling PVC water tanks 1000 litres capacity.

Dismantling PVC water tanks 500 litres capacity.

S&F rotational moulded polyethene water storage tank 1000 ltrs capacity (cylindrical vertical with closed top) double-layered including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed.

S&F rotational moulded polyethene water storage tank 500 ltrs capacity (cylindrical vertical with closed top) double-layered including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed.

S&F in repair 20mm bore, gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F ball brass valve, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 20 mm bore complete all as specified and directed.

Taking down steel tubing and connection 15mm bore.

Taking down steel tubing and connection 20mm bore.

Taking down steel tubing and connection 25mm bore.

Supplying and laying of CPVC pipes 16mm diameter SDR 11 & plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

Supplying and laying of CPVC pipes 20mm diameter SDR 11 & plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

Supplying and laying of CPVC pipes 25mm diameter SDR 11 & plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth all as specified and directed.

S&F in repair Bottle trap of PTMT 32 mm dia having minimum water seal of 25mm complete all as specified.

S&F in repairs Bib tap 15 mm CP with crutch or butterfly handle screwed down srewed for iron pipe or for brass ferrule and fixed all as specified.

S&F Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight) 190gms) all as specified.

S&F Grating doom 100 mm dia with waste hole of PTMT ( Minimum weight 140gms) complete all as specified and directed.

S&F in repairs CP brass shower rose 125 mm dia complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F in repairs 10 lits capacity PVC flushing cistern low level, white, with inlet, ball valve, float and handle flush pipe including brackets etc complete all as specified and directed.

S&F 15mm dia stop valve cast copper alloy with fancy type chromium plated fixed to iron pipe complete all as specified and directed.

S&F vitreous china wash hand basin in repair oval special type 510x410mm including fency type pillar taps including PVC waste pipe, PVC connetion and waste coupling complete all as specified. (Make-Hindware / CERA)

S&F pillar taps, 15mm bore fancy type, cast copper alloy with capston heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F 15mm dia PVC connector with PTMT nuts of length 450mm complete all as specified

S&F in repairs water closet (Squat Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed.

S&F in repair wash down water closet vitreous china pan pedestal pattern white including plastic water closet seat white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repairs cast copper alloy fancy type chromium plated bib tap 15 mm bore with hand shower screwed down, screwed for iron pipe or for brass furrel and fixed complete all as specified and directed.

S&F in repair angle cock cast copper alloy fancy type, chromium plated screwed down , high pressure,with crutch or butterfly handle, screwed both ends for iron pipe 15 mm bore complete all as specified and directed.

S&F central hole basin mixer swan neck pillar tap cost copper alloy with capstan head chromium plated , screwed down high pressure with or without lettered hot or cold with long scewed shank and fly nuts screwed for iron pipe of 15 mm bore complete all as specified and as directed (Make -JAQUAR, Cat No CON-167-B)

S&F chromium plated wall mixture with or without lettered hot or cold including telephonic shower arrangment including joints to steel pipes or unions and plugging and screwing to walls complete all as specified and as directed (Make: JAQUAR cat No : CON-217)

S&F coloured vitreous china EWC super constellation P/S with P or S trap including cistern with lid super constellation, seat cover super constellation (coloured), jet spray and cistern fitting super water saver complete set super constellation dual flush all as specified and directed. (Make:- Hindware cat No 20032, EWC and Cat No 21020 for cistern)

S&F towel rail 600 mm long of brass CP fancy type (Make-JAQUAR,Cat. No -1111N)

S&F toilet paper holder premium approved quality. (Make- JAQUAR, Cat No-con1151N)

S&F in repair soap dish of best quality complete all as specified (MAKE-JAQUAR, CAT NO-CON 1131N)

Suppy and fixing Vitrious china urinals bowl type (Back or corner wall type ) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement with brackets, flush pipes, grating and union for discharge pipe etc complete all as specified and directed.

S & F in repairs Kitchen Sink with drain board made of stainless steel 1mm thick with plugs washers and waste pipe incl bedding in CM to dwarf wall incl fitting cantilever brackets and connecting union to pipe over all size 915mm x 460 mm and bowl size 410 mm x 330mm x160mm complete all as specified and directed.

S & F for 8 to 12 mm thick Looking mirror finished surface fixed to wall with stainless steel screw complete all as specified and directed.

S&F looking mirror 450X600mm with plywood backing and aluminium frame all as specified and directed.

S&Fin repairs vitreous china urinals, half stall type Aqua Seal Premium quality including flush pipe including PVC waste pipe and outlet complete all as specified and directed. Make-Parryware, CERA

S&F in repair brass chromium plated spreader for urinals 15 mm bore complete all as spectfied and directed.Make -Parryware,CERA

M&L for 12mm thick Medium, exterior grade, fixed to timber framework with screws as in partition/any other location all as specified

Supply and fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall l all as specified.

Supply and fix in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors all as specified.

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as spcified.

S&F PVC (SWR) junction single, (Single T) equal or unequal bore of pipe 75mm complete all as specified.

S&F in repairs PVC (SWR) Branch pieces , double (double Y )equal or unequal of pipe 110mm bore complete all as spcified.

S&F PVC (SWR) junction double (double T) equal or unequal of pipe 110mm bore complete all as specified.

S&F PVC floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4) ,in repairs and including waterleak proor treatment complete all as specified.

S&F in repairs PVC connection pipe 600 mm long with two Nos CP nut threaded coupling for 15 mm dia pipe complete all as specified and directed.

M&L for PVC tiles/ sheets, 2 mm thick laminated plain coloured, marble mosaic or mottled finish laid with & including approved rubber based adhesive in floors complete all as specified and directed.

S&F high grade stainless steel wall mounted folding Towel Rack with rail, of size 24" complete all as specified and directed.

Providing and fixing 12mm thick clear Toughened glass cucical in bathroom (saint gobbain or Modi guard, acid work or blasting work on it, as per our design) with making holes/cutouts as required, making edges clear smooth polished, fixed with stainless steel cladded aluminium profile glass door rails with necessary door assembly with rubber sheet and SS handle complete all as specified and directed.

M&L for decorative laminate type 1, 0.9 mm thickness of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction's complete all as specified and directed. (Make: Centuryply, Sunmica, Greelam)

S&F PVC false ceiling with frame made of electrical resistance welded semi bright steel tube of size 38mm x 38mm x 16 SWG.The grid size of ceiling frame shall not exceed 600 x 600 mm.The frame shall be painted with two coat of synthetic enamel paint over one coat of red oxide primer and hang to steel truss with the help of 4mm dia GI wire.The PVC ceiling shall be hollow multi chambered section of size 250 x 6mm jointed to another by male and female push fitting system and will be fixed to the frame with the help of steel screws including necessary cutting for electrical fitting and refixing of electrical applainces at new specified place all as specified and directed.

S&F PVC wall paneling frame made out of electric resistance welded semi-bright square steel tube of size 25mm x 25mm x 16 SWG, size laid both ways not less than 600mm C/C both ways with two coat of synthetic enamel paint over a coat of red oxide zinc on frame shall be fixed to walls by means of wooden/plastic rawel plugs or gut ties PVC wall panelling shall be laminated plastic section SPUF-144 of size 250mm x 8mm with distance between the supporting ribs not exceeding 19mm including necessary cutting for electrical fitting as per site requirement complete all as specified and directed. (Makle:- Cactus, Sintex, Plasopan)

M&L for 2nd class hard wood timber framed and fixed clean sawn in scantlings.

M&L for 18/19 mm thick Pre laminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F Continuous (Piano) type hinges mild steel bright finish or electro galvanised, width of flap will be 30 mm complete all as specified and directed.

S&F Magnetic door catch stopper holder (Size : 6cm) complete all as specified and directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 32975.00 (refer Tender Srl Page No 38). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

SHRI S K BHATTACHARJEE

M/S KAR CONSTRUCTION

PRADIP KUMAR BOSE

NAYAK BROTHERS

M/S LOKENATH ENTERPRISE

M/S UTTAM ENTERPRISES