Upgradation of Infrastructure of Alanahat PHC under AMA HOSPITAL (2nd Phase) in the District of Jagatsinghpur for the year 2025-26.

Dismantling & Removing old tile flooring including stacking the useful materials for reuse and removing the debris within 50m lead with cost of all labour etc. complete.

Dismantling & Removing 2.5cm thick grading concrete from roof slab including removing the debris within 50m lead with cost of all labour etc. complete.

Removing Old lime or cement plaster including raking out joints 12mm deep and removing the debris within 50m lead with cost of all labour etc. complete.

Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges upto 5M height

Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete as directed by the Engineer in charge.

Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge.

Providing and laying P.C.C. (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge.

Fly ash brick masonry in cement mortar (1:6) on Foundation and plinth using Fly ash bricks of 125cmx12cmx8cm size having a crushing strength of not less than 75 kg per Sq.cm with dimensional tolerance + 8 percent after immersing Bricks for six hours in waters before use with all necessary projections, splays cutting, circular moulding, chamfering, corbelling, watering, curing etc. complete including cost, conveyance, royalties, taxes of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge.

Providing and laying plain cement concrete of proportion (1:2:4) in foundation and floors using 12cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including cost of all labour etc complete.

Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing 6 mm thick C.P. with C.M. (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing 12 mm thick C.P. with C.M. (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Fixing tiles/Marbles in dados skirting and risers of step on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles etc. complete.

Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Painting two coats with approved enamel paints of approved colour, shade over a coat of primer over new Iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.

Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.

Supplying & fitting fixing of un- plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD) casement window with top fixed--60 series dully manufactured using UPVC reinforce profile of 60mmx55mmx2.5mm for outer frames 75mmx60mmx2.25mm for cashment windows sash profile and 74mmx60mmx2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm and product conforming to ASTM D 638-14 EN-477-95 and Other applicable code and standards.

supplying, fitting, and finishing of two track UPVC sliding windows of approved make with 6mm thick etc complete.

Providing, fitting and fixing or Al. Door with anodized Al. Door section NO 9202 as vertical member etc complete.

Supplying, fitting and fixing of window sliding type made of Alluminum section 9778 as windows etc complete.

Providing and fixing 45mmx 75mm factory made single extruded WPC etc completed

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete

providing, fitting, fixing of aluminum frame with mosquito jally fixing including all cost etc.

Supplying, fitting, fixing of Vitrified Tile 600mmx600mm Coloured I Printed series(Homogeneous in floors marbonite or equivalent make in all floors over 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Supplying, fitting, fixing of Granite tile in marbonite or equivalent make in all follrs over 25mm

Suppluy fiting fixing 19mm thick ply wood door fame with sunmica including cost of material labour etc complete.

Supplying of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials etc.complete as per the instruction of Engineer-in-Charge .

Labour for fitting fixing of m.s grill including cost of all material labour etc complete.

PROVIDING FITTING FIXING OF ALUMINIUM FRAME with glass fixing including all cost etc complete

Siupply fitting fixing 32mm thick Ply wood shutter finishing with sunmica including cost of all material labourfd etc complete.

Providing, Fitting & Fixing of Arm strong acoustic false ceiling(DR no.685 of 2013-14) with 2ft center to center L section including cost , conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing, Fitting & Fixing of Gypsum Ceiling with Al aionised T section No 3215 on including cost , conveyance, royalties and taxes of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Supplying, fitting & fixing of Pre-painted Al-Zn colour coated iron profile sheet of 0.5mm thick of approved make such as (Tata blue scope / JSW coloron / Bhusan / Equivalent) in roof drilling hole in wind ties including fixing of ridges, valleys, wind ties etc. including cost of hardware fittings, cost of all materials, labour, conveyance, taxes, loading, unloading, lapping, T&P, etc. all complete as per the direction of Engineer-in-Charge.

Supplying, fabricating & fixing of polished stainless steel (304 grade) items made out of pipes, angles, flats, plates, hollow tube, square pipe bracing as per approved design and specification, buffing, polishing etc. with cost, conveyance, labour in railing, parapet, staircase, space frame etc required for the work complete in all respect as per direction of Engineer-in-charge.

Supplying and fixing of Encapsulated lens type high intensity retro reflective over ACP bord as per approved drawing including cost, conveyance, taxes of all materials, labour, T&P etc, all complete as per the direction of Engineer-in-charge.

Providing and erecting of SS plate & Engraving) as per approved drawing including cost, conveyance, taxes of all materials, labour, T&P etc, all complete as per the direction of Engineer-in-charge.

Providing and erecting of Acrylic board of 6mm thickness and vinyl pasting (eco solvent printing) on back side of board as per approved drawing including cost, conveyance, taxes of all materials, labour, T&P etc, all complete as per the direction of Engineer-in-charge.

Provinding and erecting sunboard of and vinyl pasting one side of board as per approved drawing including cost, conveyance, taxes of all materials, labour, T&P etc, all complete as per the direction of Engineer-in-charge.

R.C.C. work of M-20 grade having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position.

b) grade beam

c) column S/S

d) Lintel

Brick work with Fly Ash bricks of size 23cmx11cmx8cm and crushing strength not less than 75 kg/cm2 in C.M.(1:6) in Super structure including cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge.

Straightening cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper positi

Providing and laying plain cement concrete of proportion (1:2:4) in foundation and floors using 12cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including h

Providing and laying of 60mm thick cement concerete interlocking paver blockes of M-30grade and of approved make variety ,colour and size made by block making machine with strong vibratary compaclion of approved design and shape laid in required colour and partten over 50mm thick compact ed bed of coarse sand filling the joints with fine sand etc complete including cost conveyance ,royality taxes of all material etc complete

Chajja

Roof Slab

Brick work with Fly ash . bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C.

Providing 16 mm thick C.P. with C.M. (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Supplying, fitting, fixing of Vitrified Tile 600mmx600mm Coloured I Printed series(Homogeneous in floors marbonite or equivalent make in all floors over 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Painting two coats with distemper over one coat of primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Labour for fitting fixing of m.s grill including cost of all material labour etc complete.

Chequred Tile

Supplying, fabricating and fixing structural steel work using GI circular /square /rectangular hollow pipes of approved make and quality confirming to IS 4923 including cutting, hoisting and fixing in position including cost, conveyance,taxes of materials, labour, T&P, etc. complete.

R.C.C. work of M-20 grade having minimum compressive strength in work test of 250 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position.

Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge for 100 cum.

Dismantling & removing doors, windows & ventilators including removal of frame, hinges, fastening and stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour etc. complete.

Dismantling G.C.I. Sheet or A.C. Sheet roofing after carefully removing nuts & bolts including stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour etc. complete.

Dismantling & removing Brick / Stone Masonry in C.M./L.M. including stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour etc. complete.

Dismantling & removing RCC chajja including stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour etc. complete.

Carraige of debries by mechanical means including cost of all

Supply of Hydrolic excavator 1 cum buckt for leveling the bed

(ELECTRICAL) Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Make of modular switch -Anchor Roma/Legrand/L & T/ Crabtree) Group- A L.P-25

Group- B L.P- 20, F.P-7, EXP-5

Group- C L.P- 20 F.P-10, CBP-5

Supply and fixing of 6 Amp plug with 6 Amp switch on existing board (Piano type/cover including connection etc. as required )

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 6Amp socket outlet and 6Amp Modular switches connection (make-Anchor Roma/ Legrand /L & T/ Crabtree)

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (make-Anchor Roma/ Legrand /L & T/ Crabtree)

Wiring in PVC conduit with modular switch and socket for computer board (4 Nos modular switch and socket)

S/F of 25Amp modular stater with 32 Amp TP connector for AC machine power point incul. All connection (Legrand/Havells/HPL)

S/F of electronic step type Modular Fan Regulator (Make-Cona/Anchor/usha/Bajaj)

S/F OF celling fan down rod

S/F OF celling fan hook

Wires Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL)2 X 1.5 sq.mm +1 X 1.5 sq.mm 20 mm dia

2 X 2.5 sq.mm +1 X 1.5 sq.mm 20 mm dia

2 x4 sq.mm +1 X 1.5 sq.mm 20 mm dia for AC point and power point

2 x6 sq.mm +1 X 2.5 sq.mm -do- From panel to LDB

4x6 sq.mm +1 X 2.5 sq.mm in 25 mm dia

4x10sq.mm +2 X 4 sq.mm in 32 mm dia

Fitting Item S/F of 60 watt street light (Make-Havells/ Philips/Bajaj/Crompton)

S/F of 20Watt LED tube light Fitting(4ft) (Make-Havells/ Philips/Bajaj/Crompton)

S/F of 9 Watt LED bulb (Make-Havells/ Philips/Bajaj/Crompton)

Supply & Fixing of BLDC A.C Ceiling fan 48" size (1200 mm) having wattage not more than 28 watt and air delivery > 215 meter3 per min replacement warrenty will be 4 years . (Make- Crompton Energion/ Hacvells Efficiencia Neo/ Usha Technix)

Supply Fixing of Wall mounted Fan 400 MM (make-/ Havells/Usha/almonard)

S/F of 36 watt (2x2) Recess Square ceiling Light with replacement warrenty two years (Make-Havells/ Philips/Bajaj/Crompton/orient)

S/F of 18 watt (210 mmx210 mm ) Recess/surface Square/round ceiling Light with replacement warrenty two years(Make-Havells/ Philips/Bajaj/Crompton/orient)

Supply and fixing of of LED gate light /post Tob of 20/15 watt (Make-Havells/Crompton / Panasonic / Philips )

Supply Fixing of Exhaust fan 10/12" size(make-/ Havells/Usha/almonard)

Supply and fixing of Ding dong call bell (Make- Cona/anchor )

AREA LIGHTING Supply of 7 mtr long hot dip Galvanized octagonal pole manufactured from HT steel as per BS EN 10025/IS 2062 having minimum yield of 350N/ SQ MM having top dia of 70 MM A/F and bottom dia of 155 MM A/F of 4 mm thick or more , base plate as per IS 2062 complete with 4 nos . En 8 grade foundation bolts to withstand basic wind speed 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more , make of poles-Utkal Galvanizers/Utkarsh/Bajaj/JK /RR/walment or equivalent repuated company)

Supply of three arms G.I Structure welded with top canopy at an angle of 90 degree suitable for 3 nos.80 watt LED flood light to the above pole. the outer diameter of arms are of 70 mm G.I nut bolts are to provitded on canopy to fix the arm rigidly on 9 Mtr. galvanized Octagonal Pole( Make- Utkarsh/ Bajaj/ Valmont/Lyshat/Jaquar)

Construction of RCC foundation by using M20 grade RCC and Fe 415 grade reinforcement in the foundation by considering the SBC as 10 T per sq mtr and fixing the 4 nos. fdn bolts in that foundation for installation of pole with Solar light on that foundation. The work shall be excuted as per the direction of EIC.

Installation of 7 mtr pole and fixing the solar light on that foundation by using suitable machinery by taking all safety precautions as per the direction of EIC.

Supply and fixing of 80 watt flood light (Make-Havells/ Philips/Bajaj/Crompton)

AIR CONDITIONER Supply of 1.5 Ton 3 Star 18K Split type AC machine (Make:- Lloyd/ Carrier/Blue Star)

Supply and Fixing of 4KVA Voltage Stabilizer(130V-280V) for AC(Make-V-Guard)

Ms Stand for Outdoor Unit

Installation of Split type Air Conditioner machine as per direction of engineer in Charge

POWER BACKUP/ INVERTER Supply and Fixing of 2350VA Inverter(Make-Luminous/Microtech)

Supply and fixing of Tall Tubular Inverter Battery 12V/220Ah( Make-Microtech/Exide/ Luminous)

Supply and Fixing of Inverter Tolly

Supply and Installation of 3 KVA Online UPS (1 KVA/72 Max+) 1 Phase in 1 Phase out with Inbuilt Isolation Transformer, Smart IED Display, Parallel Redundancy having 30 min Back up time. (Make:- Microtek/ EPSON/Vertiv)

Supply and Fixing of 65 AH 12 V Battery. (Make:- Exide / Luminous)

Supply and Fixing of Battery Rack Made up of 50mm/ 5 mm MS angle of Size 4'x3'x2'

MCB BOX AND MCB Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make- HPL/Havells /Legrand / L & T/C & S )4 way (4+12) Way TPN DD DB MCB

Supply and fixing of 16 way DD DB box Havells/ C&s / L&t

Supply and Fixing of 63 Amp.FP MCB C series ( Make-Legrand DX3/Scnider Act 9/L&T)

Supply and Fixing of 63 Amp.DP MCB C series ( Make-Legrand DX3/Scnider Act 9/L&T)

6-32 amp SP MCB C series( Make-Legrand DX3/Scnider Act 9/L&T)

Cable and Service connection Supply and fixing of 3.5 C X50 Sq mm PVC Alluminium XLPE armoured cable of make - Havells/ Polycab/ KEI / V-Guard / Glowstar

Supply and fixing of 3.5 C X35 Sq mm PVC Alluminium XLPE armoured cable of make - Havells/ Polycab/ KEI / V-Guard / Glowstar

Supply and fixing of 3.5 C X25 Sq mm PVC Alluminium XLPE armoured cable of make - Havells/ Polycab/ KEI / V-Guard / Glowstar

Supply and fixing of 10 sq mm Almunium service wire including GI Stay wire of make - Polycab/ V-Guard / Havells etc

Laying of cable on surface and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of size exceeding 25 sq.mm on surface as required.

Earthing S/F of Copper plate Earthing complete in all respect as per specification of SR 2011 and as per Direction of Engineer-in -ChageStandard Earthing as per Govt. Spcn.

Salt and charcoal for G.I or copper pipe earth electrode as required

Supplying and laying 25mm X 5mm G.I strip on surface or in recess for connection etc as required.

Panel and Main switch Supply and fixing of ICDP main switch Switch of 63 Amp make - Cona / Anchor

Supply , installation , testing and commissioning of 200 Amp INDOOR pannel board with danger board with danger board. 16/18 SWG pannel box 48"X 42" X 10 size for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinged door must be painted one coated red oxide and two coat enamel gray paint with powder coats.(main panel )

Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections L X B including cost of copper conductor and other fittings.

S/F of copper bus bar 35x 5mm with required size of insulating material and nut and bolts.

S/F of 200 Amp MCCB 25 KA ( Make-L&T/ Legrand/Schnider/ C&S/ Havells )for incomming Cable

S/F of 200 Amp Changeover ( Make-L&T/ Legrand/Schnider/ C&S/ Havells )

S/F of 63 Amp 4 P MCB ( Make-L&T/ Legrand/Schnider/Haguar)

S/F of 63 Amp DP MCB ( Make-L&T/ Legrand/Schnider/ Haguar)

S/F of digital ammeter for the indoor panel

S/F of digital voltmeter for the indoor panel

Supply and fixing of Indicator lamp with toggler switch and fuse

Istalation charge of indoor panel

Supply , installation , testing and commissioning of 100 Amp INDOOR pannel board with danger board with danger board. 16/18 SWG pannel box 36"X 24" X 10 size for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinged door must be painted one coated red oxide and two coat enamel gray paint with powder coats.(Sub panel )

Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections L X B including cost of copper conductor and other fittings.

S/F of copper bus bar 25x 5mm with required size of insulating material and nut and bolts.

S/F of 100 Amp Changeover( Make-L&T/ Legrand/Schnider)for incomming thermal magnetic release

S/F of digital ammeter for the indoor panel

S/F of digital voltmeter for the indoor panel

Supply and fixing of Indicator lamp with toggler switch and fuse

Instalation charge of indoor panel

(PH WORK) Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor c-pvc pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge. In Ground Floor 20mm dia 'C' PVC pipe

25mm dia C-PVC Pipes

40mm dia C-PVC Pipes

50mm dia C-PVC Pipes

25mm dia HDPE pipe

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge. In ground floor 25mm dia UPVC ASTM-D Pipes

40mm dia UPVC ASTM-D Pipes

50mm dia UPVC ASTM-D Pipes

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mm thick wall In Ground Floor

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor floor

Supplying all materials, labour, T&P and cutting metalled road for taking the GI pipe/sewer line through and making good to the damages including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15mm dia CP two way bib cock(CON-CHR-041KN)

15 mm dia CP S.B. Bib cock(CON-CHR-037KN)

15 mm dia CP L.B. Bib cock(CON-CHR-107KN)

15mm dia CP angle stop cock(CON-CHR-053KN)

20mm dia CP Con. stop cock (CON-CHR-089KN)

15 mm dia CP Elbow Action Bib cock (Plaza/Aquiatic/Amber)

Pillar Cock with Lev. Handle for Elbow Ope. (FLR-CHR-5031)

15mm dia CP flange

15mm Cp extention piece

25mm brass full way valve

40mm brass full way valve

50mm brass full way valve

125mmdia C.P.grating

Over Head Shower 100mm dia round with Arm (OHS-CHR1999) + (SHA-CHR-477)

15mm dia CP hand shower with reebit cleaning system (ABC chrome plated-Jaquar make-HSH-CHR-85537)

600mm X 125mm C.P glass shelf (ACN -CHR-1171N)

CP towel rail (25 mm)(ACN-CHR-1111N)

C.P towel ring(ACN-CHR-1121NMI)

CP Soap dish Holder (ACN-CHR-1131N)

Grab Bar (Stainless steel)size 600mm long(AHS-CHR-1507 Jaquar make)

Supplying all materials, labour, T&P and providing & electrification to submerssible pump sets and service connection including fitting fixing of electric board & Switch etc all complete as per direction of the Engineer in charge.

Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 litres capacity pvc low level cistern (Slimline-white)

Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 3.18m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge 2000litre capacity water storage tanks(Sintex make) (In 1st Floor)

1000litre capacity water storage tanks(Sintex make) (In 1st Floor)

Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge 110mm dia U-PVC SWR pipes(Supreme/Ashirvad)

110mm U-PVC door Tee

110mm U-PVC door cross Tee

110mm U-PVC plain Tee

110mm U-PVC door bend

110mm U-PVC plain bend

110mm dia U-PVC off set

110mm dia U-PVC 'P' trap

110mm dia U-PVC cowl

110mm dia U-PVC clamp

50mm dia UPVC class-IV pipes

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI/PVC SWR pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall

Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge 580mm size Orissa pan (Parryware/Cera/ Nycer Make)

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge a.European water closet with ‘S’ trap plain (Parrywere/Hindware/Nicer Make)

Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge Squatting urinal (Parryware make)

Supplying all materials, labour, T&P and fixing bowl pattern urinal of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Half stall urinal (Jaquar)URS-WHT-13261

15mm CP spreader

32mm CP doom waste

Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge 600x450x250 mm stainless steel kitchen sink-glossy-IS:13983 - 1994 (Jayna make)

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps(Plaza make) capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge 550mmx400mm size wash hand basin with Pedestall (Parryware)

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge 600mmx450mm size B.E mirror

Supplying all materials,labour,T&P and dismantling the damaged squatting type water closet and urinal plates etc and mending good the damages to the floors and removing the debris at a safe distance as per direction of the Engineer in charge Squatting type water closet

Damaged EWC, AIWC, basin, cistern

Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking of the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge

Dismantling and removing old tile flooring including stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge.

Dismantling and removing old tile dado from walls including racking out joints 12mm deep and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. 12mm thick CP (1:4) on bw- In Gf(inside/outside)

Fitting and fixing vetrified tiles Kajaria on floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost conveyance, royalities and taxes etc. all complete as per direction of Engineer in charge. (Ceramic floor tiles of premium grade Kajaria / Jonshon/Somany make of size 600x600mm to be pre-approved by the Engineer in charge) In Ground Floor

Fitting and fixing vetrified tiles of Kajaria to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including cost conveyance, royalities and taxes etc. all complete as per direction of Engineer in charge. (Ceramic wall tiles of Size 600x300mm premium grade Kajaria / Somany make special plain / printed series to be pre-approved by the Engineer in charge) In Ground Floor

Supplying all materials, labour, T&P and fixing pvc shuttr with frame of best quality having laminated finish including supply of all door fixtures etc all complete as per specification and direction of the Engineer in charge a.PVC door with frame

Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour,T&P , hire charges of drilling machine,labour charges etc. complete.

Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:1.5:3) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, fly ash bricks in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI/P-trap gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge Inside size 250mmx250mm

Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 760mmx760mmx460mm

Reconstruction of Inspection chamber

Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 910mmx910mmx910mm

Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.22m dia x 2.10m deep soakway pit

Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge R.C.P.C. Cover(20"/22" round Man hole cover)

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia u-pvc pipe alround concrete

160mm dia u-pvc pipe alround concrete

Supplying all materials, labour, T&P and cleaning choked inspection chamber/man hole chamber/sewer line/septic tank by engaging sweeper using bamboo and disposing sewage at a safe distance all complete as per direction of the Engineer in charge a.Sweeper

Supplying all materials ,labour for removing of sludge from septic tank and disposing them at a suitable distance by engaging sweeper using cess pool truck through biring at a safe distance etc.all complete as per direction of the Engineer-in-charge

Construction of 20 users Brick Septic tank Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.

Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor

Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In F&P

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs

Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor

Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor

Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge

Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge

Please Enable Macros to View BoQ information