Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.5 LAccepted-AOC FLAT NO 002 MAHAVIR VILLA CHS LTD PLOT NO 259 SECTOR 21 NERUL EAST NAVI MUMBAI 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹35.0 L+₹1.4 L (4.07%)Rejected-Finance ATLANTIS A2 1501 PLOT NO 05 SECTOR 11 NEAR CLOUD 36 GHANSOLI NAVI MUMBAI 400 701 E 97 CWE SUBS BHANDUP | THANE | MAHARASHTRA | 400701 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹36.2 L+₹2.5 L (7.52%)Rejected-Finance | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹36.3 L+₹2.6 L (7.86%)Rejected-Finance FLAT NO B 401 4TH FLOOR NAVADURGA CO OP HSG SOCIETY LTD PLOT NO 7 SECTOR 19A NERUR EAST NAVI MUMBAI THANE MAHARASHTRA 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹40.4 L+₹6.8 L (20.2%)Rejected-Finance | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹88,000
Closing Date
17 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
PROVISION OF HARD STANDING FOR CG DOCK AND TORPEDO DOCK AT ND MBI UNDER MAINTENANCE OF MARINE ASSETS UNDER GE (NW) KUNJALI COLABA MUMBAI
2022_MES_558540_1
8515/CWE (NW) Mumbai/ E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) KUNJALI
Class D
7 documents required · 7 mandatory
₹500
Yes
GE (NW) Kunjali
₹88,000
Yes
23 Nov 2022
18 Oct 2022
19 Nov 2022
18 Oct 2022
17 Nov 2022
3 Nov 2022
18 Oct 2022 - 1 Nov 2022
Amount
Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thick (below or above GL)
Demolition of reinforced cement concrete in ground floor and paving not exceeding 15 cm thickness (below or above GL)
Material and labour for TMT mild steel bars, 10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-O
All as per item No 3 above but 5mm dia and over upto and including 10mm dia as in stirrups
Supply and fix for rolled mild steel Sections of Grade Fe 410-W, (Gde- E-250) quality-A, as in post, runners, rafters, purlins steps etc fixed with connecting plates including bending, welding etc complete
All as per item No. 5 above but MS Plates
Material and labour for preparation of new steel surfaces exc 10cm width of girth and applying two coats of epoxy paint over a coat of epoxy primer
Supply and fix 200 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars
Material and labour for Ready mix concrete in Pavement/Hard standing of minimum flexural strength 45 Kg/Sqcm in field using minimum 400 kg of cement per cubic metre for thickness of concrete 250 mm with synthetic fibre reinforcement, laid in bays or as directed with and including steel formwork to sides of concrete & laid, spread, compacted and finished in a continuous operation all as specified and directed
Note :- (i) The flexural strength of 45 kg/Sqcm at 28 days on field is to be achieved without considering the effect of synthetic fibres. (ii) Rate quoted shall be inclusive of Synthetic fibre reinforcement @ 125gm per bag of cement. (iii) Cost of admixtures required to achieve the desired properties of concrete shall deemed to be included in the quoted rate. (iv) Quoted rate is deemed inclusive of cost of necessary form work.
All as per item no 9 above but precast reinforced cement concrete in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like incl necessary form work
Finishing surface to concrete roads, pavements, by belting
Lifting & placing in position of precast RCC cover slabs by lift/ crane in position as directed by Engineer in Charge.
Material and labour for taking down, chipping and removing the loose, spoilt, damaged cement concrete, cement mortar surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface, wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required and applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement/ microconcrete and quartz sand mortar in CM 1:3 mix, 40mm thick in two coats, using polymer @ 10 to15% by weight of cement, fnished even & smooth complete all as specified and directed. Make : Dr. Fixit/ Sunanda/ chemestik/ Fosrok or microconcrete Note :- (New reinforcement and MS Sections will be measured and paid separately)
Supply only readymix microconcrete mixture
Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A'
Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound A
Removing debris exceeding 1.50 Km but n exc. 15 Km and depositing where directed, in soil
HINDUSTAN BUILDERS
jalandhara construction
ROHIT CONSTRUCTION
georson constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .