REPAIR / PAINTING OF STEEL FURNITURE AND POLISHING OF WOODEN FURNITURE AND REPAIR /RETIGHTENING OF CHARPOY GI PIPE NYLON NEWAR AND CONVERSION OF ..... ARTICLES IN OTA, 52 SUPPLY ASC COY, MH KAMPTEE AND 414 ASC MKTG UNDER GE KAMPTEE

Amount

ALMIRAH LARGE STEEL WITH SHELVES:-

Removing of old unserviceable MS clamps and S&F new MS clamps with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable lock 6 lever and S&F new lock 6 lever with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. Make: Link /Godrej/ Standard/ Aligarh

Removing of old unserviceable stainless steel handle and S&F new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable 3 way Locking device with MS rods and cover box and supply & fixing of new 3 way locking device with MS rods and cover boxs with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and S&F new MS shelf made to shape out of 1mm thick MS sheet fixing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable base channel of size 485x80x100mm and S&F new Base channel of size 485x80x100mm to be welded at 50mm from each end of length as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shutter made to shape and S&F new MS shutter made to shape as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS Butt hinges 75mm and S&F new MS Butt hinges 75mm with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

ALMIRAH MEDIUM STEEL WITH SHELVES:-

Removing of old unserviceable MS clamps and S&F new MS clamps with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable lock 6 lever and S&F new lock 6 lever with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. Make: Link /Godrej/ Standard/ Aligarh

Removing of old unserviceable stainless steel handle and S&F new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable 3 way Locking device with MS rods and cover box and S&F new 3 way Locking device with MS rods and cover boxs with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and S&F new MS shelf made to shape out of 1mm thick MS sheet fixing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable Base channel of size 485x80x100mm and S&F new Base channel of size 485x80x100mm to be welded at 50mm from each end of length as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shutter made to shape and S&F new MS shutter made out 1mm thick to shape as per give in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS Butt hinges 75mm and S&F new MS Butt hinges 75mm with nut bolts or welding as per give in drawing and site requirement complete all as specified and directed.

LOCKER BED SIDE STEEL:-

Removing of old unserviceable hasp and staple and S&F new CP Hasp and Staple 75mm long as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable stainless steel handle and S&F new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and S&F new MS shelf made to shape out of 1mm thick MS sheet fixing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable leg of size 600mm x 80mm x 100mm and S&F new leg of size 600mm x 80mm x 100mm made out of 1mm thick MS sheet fixing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable MS shutter made to shape and S&F new MS shutter made out 1mm thick to shape as per given in drawing and site requirement complete all as specified and directed.

ALMIRAH LARGE STEEL WITH GLAZZED DOOR:-

Removing of old unserviceable MS clamps and S&F new MS clamps with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable lock 6 lever and S&F new lock 6 lever with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed. Make: Link / Godrej/ Standard/ Aligarh

Removing of old unserviceable 3 way Locking device with MS rods and cover box and supply & fixing of new 3 way Locking device with MS rods and cover boxs with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable stainless steel handle and S&F new stainless steel handle 100mm long with nut bolts or welding as per given in drawing and site requirement complete all as specified and directed

Removing of old unserviceable MS shelf made to shape out of 1mm thick MS sheet and S&F new MS shelf made to shape out of 1mm thick MS sheet fixing bolts or welding as per given in drawing and site requirement complete all as specified and directed.

Removing of old unserviceable shutter with glass sheets and S&F new steel shutter with glass sheets, steel shutter shall be made out of 1mm thick MS sheet, glass shall be 4mm thick required shape and size complete all as specified and directed.

TABLE OFFICE STEEL (CLERK/STEEL) :-

Removing of old unserviceable legs made of MS conduit/square pipe and S&F new legs made out of MS conduit/ square/ pipe of size 25mm dia and 1.6mm wall thickness complete all as specified and directed.

Removing of old unserviceable drawers with telescopic channel and lock 6 lever complete and S&F new MS drawers made out of 1mm thick MS sheet with lock of 6 lever, drawer shall run on telescopic channel for which new telescopic channel of appropriate size shall be fixed in the table complete all as specified and directed.

Removing of old unserviceable drawers cabinet shutter and S&F new MS cabinet shutter, shutter made out of 1mm thick MS sheet with groove duly covered with PVC to pull the shutter out complete all as specified and directed

Removing of old unserviceable Pre-laminated particle board top of clerk table and S&F new Pre-laminated particle board 19mm thick light shade as approved by GE with 6mm thick teak wood beading around the edges of partical board complete all as specified and directed.

M&L for welding to broken joints of frame of table complete all as specified and directed.

S&F in repair of hard rubber shoe to the leg of table of standard approved quality complete all as specified and directed.

M&L for re-painting of mentioned below steel furnituire as per the following steps:- (a) Denting of bent surfaces with the help of hammer in best workmanship manner. (b) Removing old paint by scrubbing with sand paper 150 No thoroughly. (c) Applying one coat of metal primer. (Make: Asian/ Nerolac/ Dulux). (d) Applying metal putty to even surface wait period 2-3 hours to be given for putty to set and dry completely. scrub off the excess putty with 150 No and paper and spraying little amount of water simultaneously. (e) Wipe the surface with solt dry cloth and apply one coat of enamel paint of light shade as approved by GE.

Almirah large steel with shelves.

Almirah med steel with shelves.

Locker bed side steel.

Table office clerk steel.

Table office officer steel.

Almirah large steel with glazed door.

GI PIPE CHARPOY PLY TOP INTO GI PIPE PLYTOP :-

Removing of old unserviceable plytop from GI charpoy and supply & fixing two Nos stiffners made out of MS square pipe size 25mm x 25mm x 1.5mm conforming to IS-2062 of 1999 Grade 'A' (weight of pipe not less than 1.06 kg/mtr). The stiffners shall be welded to the frame of the GI charpoy at equal distance joining the long rail such that they lie parallel to short rails and perpendicular to the long rail. The stiffners shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make: Prakash/ Surya

Removing old unserviceable plywood from charpoy plytop and welding of old broken stiffners pipe and re-fixing plywood in charpoy complete all as specified and directed.

Removing of old unserviceable long rails having both threaded broken end and S&F new long rail made out of GI tubing 32mm bore mediam grade ISI marked including making threaded both ends and fixing as shown on drawing complete all as specified and directed. Make of pipe:- SURYA /TATA/ JINDAL

Removing of old unserviceable short rails of GI charpoy having both threaded broken ends and S&F new short rails of GI charpoy obtained from Srl Item No 7.3 above, including making threads at the both ends and fixing as shown on drawing complete all as specified and directed.

Removing of old unserviceable leg and S&F new leg made out of short rail of GI charpoy obtanied from Srl item No. 7.4 above, including welding of MS plate at the bottom of leg and making thread other end & fixing in position complete all as specified and shown on drawing.

Removing of old unserviceable GI elbow three way and S&F new GI elbow three way size 32mm bore with new ISI mark (weight not less than 420 gms each and re-assembling of GI Charpoy after replacement of broken elbow complete all as specified and directed.

Removing old unserviceable check nuts from long rail of GI charpoy and supply & fixing of new check nut of 32mm bore and 10mm wall thick, (Wt not less than gms each) ISI marked and fixing in the same in position complete all as specified and directed.

S&F in repairs new 12mm thick plywood ISI marked BWR Grade of approximate size 1980mm x 900mm conforming to IS-303/1989 on top of GI pipe charpoy fixing with 10 Nos new nut, bolt and washer of suitable size after re-tightining of all joints of charpoy all as specified and directed. Make: KitplyI /Archid/ Greenply/ National Note:- Each corner of plywood should be round shaped.

S&F new 12mm thick plywood in repairs ISI marked BWR Grade of approximate size 1980mm x 1050mm conforming to IS-303/1989 on top of GI pipe charpoy fixing with 10 Nos new nut, bolt and washer of suitable size after re-tightining of all joints of charpoy all as specified and directed. Make: Kitply /Archid/ Greenply/ National Note:- Each corner of plywood should be round shaped.

M&L for preparing of old/new polished wood based furniture articles as per the following steps:- Step 1 Sanding:- The wood components shall be rubbed with sand paper No 120 along the grains to remove any dust/ wax/unwanted stains from the surface, the sanding will be repeated with sand paper between 180-220 grit in order to achieve the smooth surface and the wood will be wiped clean with soft clean cloth complete all as specified and directed. Steps 2 Staining : Any cracks or holes shall be filled with wood filler of good quality. After the wood filler has dried completly sanding with a stain of approved shade will be then applied to the prepared surface with the help of a soft malmal cloth or brush along the grain'. two to three coats of staining will be done letting the stain dry completly between each coats and sanding every time very fine grit sand paper (220-320). NOTE: Excess stain should be wiped off before drying and getting absorbed in wood. Step 3 Polishing : Wood will be finished with a good quality french polish (mixture of shellac grains and methylated spirit in ratio 1:10) two to three coats shall be applied to prepared wood surface letting each coat to dry and absorbed fine sanding can be done if required, Polish shall be applied with a soft cloth/ brush along the grains and not against it to achieve high gloss complete all as specified and directed.

Table dining 04/06 person

Table dining 8 person

Teapoy

Table writing

Table 3'x2' with drawer

Table 3'x2' without drawer

Table dressing ladies with mirror

Table dressing gents with mirror

Stool dressing

Peg Table

Side board

Chair writing

Chair easy

Chair dining

Table bed side

Table center

Hat stand with mirror

M&L for preparing of furniture items as per following steps :- (i) Denting of bent surface with the help of hammer in best workmanship manner. (ii) Removing old paint by scubbing with sand paper 150 No throughly (iii) Applying one coat of metal primer Make: Asian / Dulux/ Nerolac. (iv) Applying metal putty to even the surface and wait period of 2-3 hours to be given for putty to set and dry completely, Scrub off the excess putty with 150 No sand paper and spreying little amount of water simultaneously. (v) Wipe the surfface with soft dry cloth and apply one coat of enamel paint of light sgade as approved by GE.

Rack adjustable stelel 6 tier

Teapoy Vrandah.

Chair tubular steel with arms.

Table dining ORs aluminium top.

CHAIR VARNDAH

Removing of old cane from chair varandah steel (bottom and back) and re-canning with new best quality plastic cane 4mm wide, white colour complete all as specified and directed.

M&L for painting to frame of chair varandah with whioe synthetic paint after preparation of surface (after removing the old cane) complete all as specified and directed.

M&L for for gas welding to frame of chair varandah including preparation of surface and removing the unwanted welding spot complete all as specified and directed.

S&F in replacement of unserviceable portion of frame of chair varandah with 20mm conduit pipe of thickness 1.60mm duly gas welding complete all as specified and directed.

CHAIR DINING

Removing of old unserviceable rear leg of chair dining and S&F new legs of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable front leg of chair dining and S&F new legs of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable front rail/side rail/ back rail of chair dining and S&F new front rail/side rail/ back rail of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of unserviceable bottom stiffener of chair dining and S&F new bottom stiffener of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of unserviceable back rest of chair dining and S&F new back rest of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of unserviceable cane stiffener of chair dining and S&F new cane stiffener of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old cane from chair dining (bottom) and re-canning with new best quality plastic cane 2mm wide white colour cane in godrej pattern complete all as specified & directed. Make: Shah/ Maharashtra/ Arihant.

M&L for preparation of old/new chair dining and polishing of high gloss french polish of chair dining complete all as specified & directed.

TABLE WIRITING

Removing of old unserviceable leg of table writing and S&F with new legs of table writing of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable long rail of table writing and S&F with new long rail of table writing of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable short rail of table writing and S&F new short rail of table writing of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable bottom stiffner of table wiriting and S&F new bottom stiffeners of first class hard teak wood, made to shape complete all as specified & directed and as shown in drg.

Removing of old unserviceable box including drawers of table writing and S&F new drawers, drawers to be run on telescopic channels and bottom cupboard fixed with magnetic chather and piano type hinges (box shall be made of 18mm thick prelaminted particle board except back side eand back shall be made of 6mm thick commercial plywood complete all as specified & directed and as shown in drg.

Removing of old unserviceable top of table writing and and S&F new prelaminated board 19mm thick light shade as approved by GE with 6mm thick teak wood beading alround the edges of partical board complete all as specified & directed and as shown in drg.

M&L for preparation of old/new table writing and polishing of high gloss french polish of chair dining complete all as specified & directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.76,524.00]

NIHAL ENTERPRISES

M/S Shanti Enterprises

M/s Raghav Traders

Bidder Name

M/S Shanti Enterprises

M/s Raghav Traders

NIHAL ENTERPRISES

H.M Traders