Setting up of one permanent VWDC in establishment of the District Court at Port Blair.Sw Renovation of IEI

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Triple pole

Triple pole and neutral

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

Supplying and fixing suitable size Modular PVC box with modular plate and cover in front on surface or in recess, including providng and fixing 3 nos. 3 pin 5/6 A modular socket outlet and 3 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Make: Anchor or equivalent.

Supplying of 0.5 W LED bulb ( B22, Red/Green). Make: Philips or its equivalent.

Supplying of 9 W LED bulb (CDL, B22) with minimum 825 lumen at a maximum wattage of 9 W. Make: Philips or its equivalent.

Supplying of 20 W LED lighting fixture, complete with all accessories and tube similar to Philips model no. TMC 501 P 1xT-LED 22W P3241 and Essential LED tube 1200mm 20W 865 T8 IND I - 2100lm.

Supplying of 22 W Round/Square LED recessed mounted downlighter having aluminium body with minimum efficacy of 105 lm/watt. Make: Philips, Model- Duraslim or its equivalent.

Supplying of 9 W LED mirror light with minimum efficacy of 100 lm/watt. Make: Philips, Model: Astra Line or its equivalent.

Installation, Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying of Energy Saving, BLDC 5 Star, A.C ceiling fan of 1200 mm sweep complete with all accessories. Make: Crompton, Model: 1200MM ENERGION Riviera (w/o remote) or its equivalent.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying of Exhaust fan (PVC Body) of 200 mm sweep complete with all accessories. Make: Crompton, Model: 200MM BRISK AIR NEO or its equivalent.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450 mm sweep

Supplying and fixing following Size Hylem sheet on existing modular metal boxes etc. as required.

Supplying and fixing following way, MCB Sheet metal enclosure on surface, complete with din bar, interconnections etc. as required. (But without MCB/RCCB/Isolator)

ICONAGENCIES

DILIP RAJ

JOY GURU ENTERPRISES

JAY ENGINEERING