Renovation of erstwhile DM plant shed at PPC Moulaali- complex at IICT, Hyderabad

Amount

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in rizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supplying and filling in plinth with morrum under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in uperstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

15 mm cement plaster finished with a floating coat of neat cement : 1:4 (1 cement : 4 fine sand)

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)

Providing and fixing industrial exhaust fans wind turbne Aattrc ventilator fixing in GI roof including all necessary arrangement etc complete as directed by Engineer incharge .

Exposing the corroded steel around its full circumference and cleaning the same to remove all loose scales and corrosion deposits by hard brush with emery paper or, by any suitable mechanical means as directed by Engineer-in-Charge, so as to get bright conditions and removing the corrosion deposits from pits and imperfections within its surface by compressed air and water at a high pressure. Providing and applying one full coat of anti corrosive treatment of epoxy 'A' (Nitozinc primer of FOSROC Product ) or any other approved compound over the cleaned and prepared surface as per manufacturers specifications including, providing, sprinkling silica sand on freshly coated reinforcement to have a proper bond. (one litre covers 10sqm )

Electrical Work S/F PVC Conduit: Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess cutting the wall and making good with necessary cement plastering works the same in case of recessed conduit as required Make : Please refer List of Approved makes 25mm

S/F Modular boxes, base & cover plate: Supplying and fixing of following size/modules, GI box along with modular base & cover plate for modular switches in recess etc., as required Make: Please refer List of Approved makes 12 module

Point wiring in PVC conduit with modular type switch: Wiring for light point /fan point/exhaust fan point /call bell pont with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed PVC conduit/PVC Casing and Caping with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm FR PVC insulated copper conductor single core cable etc., as required. Group B

Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC condit/PVC Casing and Caping as required. Make: Please refer List of Approved makes 3 x 2.5 sq.mm

Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC condit/PVC Casing and Caping as required. Make: Please refer List of Approved makes 3 x 4 sq.mm

Wiring in existing conduit: Supplying and drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC condit/PVC Casing and Caping as required. Make: Please refer List of Approved makes 5 x 4 sq. Mm

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required Make:Please refer List of Approved makes 5/6A One way Switch

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required Make:Please refer List of Approved makes 15/16A One way Switch

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required Make:Please refer List of Approved makes 3pin 5/6A socket outlet

S/F Modular type switch / socket / fan regulator / call bell: Supplying and fixing of following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc., as required Make:Please refer List of Approved makes 6pin 16A/6A power socket outlet

S/F 'C' series MCB: Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,"C" curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:Please refer List of Approved makes Single pole

S/F 'C' series MCB: Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,"C" curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:Please refer List of Approved makes Double pole

S/F 'C' series MCB: Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,"C" curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:Please refer List of Approved makes Triple pole

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holesin cubicle panel, making connections, etc. as required. 125Amp,36KA,FPMCCB

Supplying and fixing of following ways surface/ recess mounting,vertical type, 415 volts, TPN MCB distribution board of sheet steel,dust protected, duly powder painted, inclusive of 200 amps tinnedcopper bus bar, common neutral link, earth bar, din bar formounting MCB's (but without MCB's and incomer ) as required. 12 way (4 + 36), Double door

Supplying and fixing TP sheet steel enclosure on surface/ recessalong with 16/25/32 A 415 V "C" curve TP MCB complete ithconnections, testing and commissioning etc. as required.

Earthing with G.I. earth plate 600 mm X 600mm X6 mm thickincluding accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe of 2.7metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection /terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supplying and fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. As Required

Supply of 3.5Cx70 Sq.mm aluminium armoured XLPE insulated under ground cable as per IS standards etc., as required and as directed by the engineer in charge. Make : Finolex/ Gloster

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5C X70 sq. mm (38mm)

Yayavaram Naresh Kumar

Y RAJA SHARMA

GANGI SURENDER