Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.0 LAccepted-AOC | L1 | Accepted-AOC Accepted being lowest bidder | |
| 2 | L2₹16.4 L+₹43,358.09 (2.71%)Rejected-Finance | L2 | Rejected-Finance Rejected being not lowest bidder | |
| 3 | L3₹16.9 L+₹87,391.40 (5.46%)Rejected-Finance | L3 | Rejected-Finance Rejected being not lowest bidder | |
| 4 | L4₹20.0 L+₹4.1 L (25.3%)Rejected-Finance | L4 | Rejected-Finance Rejected being not lowest bidder |
Tender Value
₹18.5 L
EMD Value
₹37,100
Closing Date
21 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KIRKEE
Headquarters CWE Kirkee, Military Engineer Services, Range Hills Road, Kirkee, Pune-411003
PROVN OF PICKET DUTY REST ROOM (GUARD ROOM) AND ATT TOILET CUM BATH R4 GATE IN 12 MAHAR AT AUNDH MIL STN UNDER GE MH AND RH KIRKEE
2022_MES_515370_2
CWE/KKE/TOKEN-46 OF 2021-22
Open Tender
Civil Works
Item Rate
120 days
KIRKEE
As per tender
5 documents required · 5 mandatory
₹500
Yes
GE MH AND RH KIRKEE
₹37,100
Yes
27 Jun 2022
6 May 2022
23 May 2022
6 May 2022
21 May 2022
7 May 2022
60 days
Amount
B/R PORTION Surface dressing n. exc. 15 cm deep in soft/loose soil.
Excavating in trenches, soft/loose soil n. exc 1.5m wide and n. exc1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10sqm on plan and n exc 1.5m in depth and getting out. Complete all as specified and directed by Engr-in-Charge
Excavating in trenches,hard/dense soil n. exc 1.5m wide and n. exc1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10sqm on plan and n exc 1.5m in depth and getting out. Complete all as specified and directed by Engr-in-Charge
Excavating in trenches n. exc 1.5m wide and n. exc1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10sqm on plan and n exc 1.5m in depth and getting out in soft/disintegrated rock. Complete all as specified and directed by Engr-in-Charge
M&L for Cement concrete type D2 1:4:8 (40mm graded aggregate)in foundations filling and mass concrete. Complete all as specified and directed by Engr-in-Charge
Returning, filling in, soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm Complete all as specified and directed by Engr-in-Charge
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point. Complete all as specified and directed by Engr-in-Charge
M&L for Sand filling under floors or in foundations in-cluding spreading, levelling and well ramming, watering and consolidation. Complete all as specified and directed by Engr-in-Charge
M&L for precast cement concrete, type C-1, 1:3:6 (20mm graded aggregate ) masonary with solid blocks, exc , 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.
M&L for Hardcore of gauge n exc. 63 mm,with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces. Complete all as specified and directed by Engr-in-Charge
M&L for 75mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in sub base of PCC floor. Complete all as specified and directed by Engr-in-Charge
M&L for 75mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in plinth protection/path finishing cement concrete surface even and smooth without using extra cement. Complete all as specified and directed by Engr-in-Charge
M & L 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in floor finishing the surface even and rough for receiving floor finishes. Complete all as specified and directed by Engr-in-Charge
M & L rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even. Complete all as specified and directed by Engr-in-Charge
M & L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces with using WPC on top layer Complete all as specified and directed by Engr-in-Charge
Supply only integral water proofing compound . Complete all as specified and directed by Engr-in-Charge
M&L for preparation of new undecorated surface of wall and applying three coats of white wash on wall complete all as specified in SSR part-I (2009) Complete all as specified and directed by Engr-in-Charge
M & L for preparation of new plastered surfaces and applying two coats of oil bound distemeper over a coat of alkali resistant primer on plastered surface Complete all as specified and directed by Engr-in-Charge
M&L for preparing new plastered surfaces of walls and applying two coats of Exterior emulsion weatherproof paint over a coat of primer. Complete all as specified and directed by Engr-in-Charge
S&F Factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of M.S. tubes for top and bottom rails, M.S.frame shall be covered with heat mouldedplain colour PVC sheets for top rail, lock rail&bottom rail on either side &as gap insert for top rail &bottom rail ;panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles &rails with suitable PVC sheet beading, and joined together with solvent ceament, supplying &fixing in the frame at site asper specification &drawing Complete all as specified and directed by Engr-in-Charge
S&F Solid PVC Door Frame size 50 mmx 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, Supplying &fixing in opening as per specification & drawing. Complete all as specified and directed by Engr-in-Charge
S&F aluminium anodised, barrel tower bolts 125mm long of ex- truded section and fixed Complete all as specified and directed by Engr-in-Charge
S&F 125 mm alluminium handle cast type anodised . Complete all as specified and directed by Engr-in-Charge
S&F 75 mm long MS medium weight butt hinges. Complete all as specified and directed by Engr-in-Charge
M&L for pressed steel door frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, Complete all as specified and directed by Engr-in-Charge
M&L for PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in hold fast and block filling of pressed steel chowkat including necessary form work etc Complete all as specified and directed by Engr-in-Charge
S&F 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stiles as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated. Complete all as specified and directed by Engr-in-Charge
S & F 35 mm thick 2nd class HW glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sites of members of shutters as specified in SSR Part-I, section 8, clause 8.20 (a) 35mm thick. Complete all as specified and directed by Engr-in-Charge
M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer Complete all as specified and directed by Engr-in-Charge
S&F for 200mm aluminium anodised barrel tower bolts of extruded section and fixed. Complete all as specified and directed by Engr-in-Charge
S&F 250mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed. Complete all as specified and directed by Engr-in-Charge
S&F for 150mm aluminium handles, cast type anodised. Complete all as specified and directed by Engr-in-Charge
S&F steel window with side hunge shutters including projecting type hinges with steel handle and steel peg stey complete with glazing bars dovetailed or welded.Complete all as specified and directed by Engr-in-Charge
All as per item No 33 above but without glazing bars ( for mosquito proof shutter ) confirming to IS. Complete all as specified and directed by Engr-in-Charge
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, Complete all as specified and directed by Engr-in-Charge
M&Lfor sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane. Complete all as specified and directed by Engr-in-Charge
S&F of Galvanised steel wire cloth 0.56 mm nominal dia or wire and average eidth of aperature 1.18 mm Complete all as specified and directed by Engr-in-Charge
M&Lfor 4mm thick, figured glass pin headed type and glazing with oil putty in squares n exc. 0.50 Sqm each pane. Complete all as specified and directed by Engr-in-Charge
S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or ri-veted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0. Complete all as specified and directed by Engr-in-Charge
M & L preparing steel new surfaces and applying two coats of synthetic enamel paint over a coat of red oxide/zinc chrome primer over 10 cm in width or girth. Complete all as specified and directed by Engr-in-Charge
M&L for RCC M-25 design mix (20mm graded agg) as in Beams, cantilevers, bressummers, lintels over 1.5m span. Complete all as specified and directed by Engr-in-Charge
M&L for RCC M-25 design mix (20mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. Complete all as specified and directed by Engr-in-Charge
All as per item No 42 here-in-above but in chajjas. Complete all as specified and directed by Engr-in-Charge
All as per item No 42 here-in-above but in columns, pillars, piers, post and struts. Complete all as specified and directed by Engr-in-Charge
All as per item No 42 here-in-above but in rafts, footings, foundation beams, plinth beams, bases for columns etc and similar works. Complete all as specified and directed by Engr-in-Charge
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. Complete all as specified and directed by Engr-in-Charge
All as per Item No 46 here-in-before but 6 to 8mm dia bar. Complete all as specified and directed by Engr-in-Charge
All as per item no.46 herein before but 5mm dia and over and including 10mm dia in stirrups, spacers and binders. Complete all as specified and directed by Engr-in-Charge
M&L for formwork to sides of concrete foundations, footings, bases of columns raft and raft beams sides and soffit of foundation and plinth beam and similar work similar or batte for rough finished surfaces of concrete in flat. Complete all as specified and directed by Engr-in-Charge
M&L formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports over hang etc and similar works for rough finished surfaces of concrete in flat. Complete all as specified and directed by Engr-in-Charge
M&L for formwork to soffits of sus-pended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Ho-rizontal or sloping) finished for rough finished surfaces of concrete in flat.. Complete all as specified and directed by Engr-in-Charge
M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick in CM (1:6) Screed bed or bedding layer of mortar for laying floor finishes. Complete all as specified and directed by Engr-in-Charge
All as in item No.52 above but as in skirting /dados including 10mm thick rendering in CM 1:4 complete all as specified and directed. Complete all as specified and directed by Engr-in-Charge
M&L Coloured Glazed ceramic tiles 450X300X7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick rendering in CM 1:4 Complete all as specified and directed by Engr-in-Charge
S & F Vitreous China Squatting pan Orissa pattern long pan, size 580 mmX440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete complete including making good to floor. Complete all as specified and directed by Engr-in-Charge
M&L 100mm dia CI Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4). Complete all as specified and directed by Engr-in-Charge
S&F vitreous china wash hand basin white, flat back of size 450 x 300mm, excluding taps, waste chain & plug & porcelein stopper but including brackets, cutting for and pinning in ends of brackets Complete all as specified and directed by Engr-in-Charge
S & F Chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union. Complete all as specified and directed by Engr-in-Charge
S& F Soap dish CP size 160 x 160 x 90 mm,fixed to plugs with chromium plated brass screws cComplete all as specified and directed by Engr-in-Charge
S&F tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated Complete all as specified and directed by Engr-in-Charge
S & F PVC connections 15 mm size with PTMT nuts of 600 mm long. Complete all as specified and directed by Engr-in-Charge
S & F PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc Complete all as specified and directed by Engr-in-Charge
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; andcutting chases for concealed watertubing or concealed conduit wiring,etc., and making good, cutting notexc 10 cm girth for PCC block /brick wall etc. Complete all as specified and directed by Engr-in-Charge
S & L 15 mm bore galvanised steel tubes medium grade with all connections and fixed to walls and ceiling or laid in floors. Complete all as specified and directed by Engr-in-Charge
S & L 20 mm bore galvanised steel tubes medium grade with all connections and fixed to walls and ceiling or laid in floors complete.
S & F 25 mm bore galvanised steel tubes medium grade with all connections and fixed to walls and ceiling or laid in floors. Complete all as specified and directed by Engr-in-Charge
S & F stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed - bore dia of pipe 15 mm but fancy type with long shank and cup ( concealed type) complete all as specified and directed by Engineer in Charge.
S & F stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed - bore dia of pipe 20 mm but fancy type with long shank and cup (concealed type) complete all as specified and directed by Engineer in Charge.
S & F angle stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed - bore dia of pipe 15 mm. Complete all as specified and directed by Engr-in-Charge
S&F Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe. Complete all as specified and directed by Engr-in-Charge
S & F 20mm dia bore Gun metal, globe or gate valves with Iron wheel head, screwed both ends for Iron pipes and fixed. Complete all as specified and directed by Engr-in-Charge
S&F 15mm dia fancy type Bib taps, cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed Complete all as specified and directed by Engr-in-Charge
S&F rotational moulded polyethylene water storage tanks of capacity 500 ltr hoisted and fixed in position including 25mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. Complete all as specified and directed by Engr-in-Charge
S&F PVC (SWR) pipes 110mm dia ,single socketed in any length with rubber ring joints laid in trenches or floor Complete all as specified and directed by Engr-in-Charge
S&F PVC (SWR) pipes 75 mm dia ,single socketed in any length with rubber ring joints fixed and laid in trenches or floor Complete all as specified and directed by Engr-in-Charge
S&F PVC (SWR) pipes 75 mm dia ,single socketed in any length with rubber ring joints fixed to walls. Complete all as specified and directed by Engr-in-Charge
S&F PVC (SWR) bends any radius,for 110mm dia pipe. Complete all as specified and directed by Engr-in-Charge
S&F PVC (SWR) bends any radius, 75mm dia pipe. Complete all as specified and directed by Engr-in-Charge
M&L for applying roof treatment as under :- (i) Providing 10mm thick (average) rendering in cement mortar 1:3 mixed with WPC as per manufacturer's instruction (to be measured separately as supply only) for levelling to a true surface and to receive new roof treatment Complete all as specified and directed by Engr-in-Charge (ii) Providing a coat of bitumen primer @ 0.40 Litre/Sqm over plastered surfaces of roof including parapet surfaces.
(iii) Providing one layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm, reinforced with polyester non woven fabric (weighing not less than 150 Gms/Sqm). Polymeric membrane shall be taken to a height 60cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Note:(a) Laying of APP based polymeric membrane shall be done by torch application method or as per manufacturar's instruction. (b) Side overlaps shall be minimum 75mm and end laps shall be minimum 100mm and sealing all overlaps and joints as manufacturer's instructions. (c) The make of polymeric membrane shall be as per PS Specification of CA. (iv) Applying two coats of bituminous aluminium paint on top of APP membrane.
M&L RCC pipes class NP-2 with socketed ends laid and jointed complete with rubber ring joints of 150mm dia Complete all as specified and directed by Engr-in-Charge
M&L for PCC 1:4:8 type D2 using 40mm graded agg as in bed to drain pipes including forming cradles for 150mm pipe. Complete all as specified and directed by Engr-in-Charge
S&F Pre Polished Chequered cement concrete tiles glossy and rubburised finish colour 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors including 15mm thick screed bed in CM 1:6 under tiles incl Complete all as specified and directed by Engr-in-Charge
M&L for precast cement concrete type B-1 1:2:4 (20mm graded agg) set in CM 1:6 as in cover slabs for manholes etc. Complete all as specified and directed by Engr-in-Charge
M&L for Cement concrete type B2 (1:2:4) 40 mm graded aggregate as in surface channels and drains Complete all as specified and directed by Engr-in-Charge
S&F vitreous china half stall type urinal white with grating and union for discharge including flush pipe Complete all as specified and directed by Engr-in-Charge
M&L RCC pipes class NP-2 with socketed ends laid and jointed complete with rubber ring joints of 200mm dia Complete all as specified and directed by Engr-in-Charge
M&L for Hume pipe septic tank designed to carry sewage and sullage water ,excavation in any type of soil,PCC (1:4:8) below foundation ,vent shaft,connection etc, complete for 10 users,conventional type. As per TD No CEPZ/91/TD/47M sheet 1/1. Complete all as specified and directed by Engr-in-Charge
M & L for Cutting of existing GI pipe of 40 TO 80 mm bore inspection of new branch line of any bore complete all as specified and directed by Engr - in - Charge.
E/M PORTION M&L for point wiring in PVC conduit complete using 1.5 Sqmm PVC insulated unsheathed (FRLS) copper conductor, stranded cable upto and incl working voltage 1100 volts grade, ISI marked, PVC concealed conduit medium grade , ISI marked incl fittings such as bend,tee,junction boxes elbows etc incl pressed steel terminal sunken boxes of size 1.2mm covered with 3mm thick plastic laminated sheet ISI marked top cover fixed with Brass screws and unsheathed copper conductor stranded cable earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly including chases cutting and making good surfaces matched with existingComplete all as specified and directed by Engr-in-Charge
One light point controlled by one switch
One fan point controlled by one switch
One 5 pin 6 Amps socket outlet on independent board.
One 5 pin 6 Amps socket outlet on same board.
All as per item No 95 above but for point wiring for power point with 2.5 Sqmm PVC insulated copper (FRLS) cable 1100 Volt grade drawn through and including conduit medium grade ISI marked /medium grade concealed conduit ISI marked as required at site along with accessories with 2.5 Sq mm PVC copper earth wire Complete all as specified and directed by Engr-in-Charge
M&L Switch piano type single pole, one way 5 amps Complete all as specified and directed by Engr-in-Charge
M&L for switch socket combination 5 pin, type 6 Amps one way Complete all as specified and directed by Engr-in-Charge
M&L for switch socket combination 3 pin , 16 Amps single pole one way Complete all as specified and directed by Engr-in-Charge
S & F socket outlet 5 pin 6 Amps flush type all as specified and directed. Complete all as specified and directed by Engr-in-Charge
S & F for Ceiling rose, 3 terminals/PVC/ polycarbonate, isolated body ISI marked. Complete all as specified and directed by Engr-in-Charge
S & F for ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with 5 star rated Complete all as specified and directed by Engr in Charge
S & F for exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers Complete all as specified and directed by Engr-in-Charge .
S & F for LED lights fitting 1x 22W, 220V, AC decorative box type, holder including LED tube rod connecting up with three core flexible copper conductor cable of suitable size from ceiling rose Complete all as specified and directed by Engr-in-Charge
M&L for sub main wiring with two run of single core PVC insulated copper cable multi-stranded conductor 2.5 Sqmm drawn through in and including Non metallic PVC heavy duty PVC conduit of suitable size as required at site with all accessories with 2.5 Sqmm PVC insulated and unsheathed copper conductor as earth wire, connected to common earth (Note two run of 2.5Sqmm wire and one of GI wire/ 2.5 Sqmm earth wire measured as one length) Complete all as specified and directed by Engr-in-Charge
M&L for Distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way double door with 200 Amps rated copper bus bar neutral bar ,earth bar IP 43 protection, single pole and neutral 250 volts ,flush to wall complete all as specified and directed including taking down old one Complete all as specified and directed by Engr-in-Charge. Make : Legrand/ L&T (Hager) /Schneider (Multiq)
S & F for MCB 240V amp rating, 10KA 'C' curve of current carrying capacity SPN 32 Amp in the MCB DB complete with connection testing and commissioning. Complete all as specified and directed by Engr-in-Charge. Make : Legrand/L&T (Hager) /Schneider (Multiq)
S & F for 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning Complete all as specified and directed by Engr-in-Charge. Make : Legrand/L&T (Hager) /Schneider (Multiq)
M&L for earthing with galvanised steel earth plate electrode 60cm x 60 cm x 3.15 mm burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to depth of not less than 1.5 mtr below ground level connected to earth lead of 4mm dia galvanised iron or steel, 7.5 mtr beyond the earth pit as earthing lead including GI protection pipe 40 mm bore (light grade) burried in ground at a depth of 300 mm upto 7.5 mtr beyond the earth pit and connecting to equipments by means of earthing lead , GI bolts, nuts & washer etc with provision of char-coal and salt etc all as per electrical plate No 3 of SSR Part - I, 2009 including RCC cover and MS angle iron frame watering arrangements with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork and testing on completion etc complete all as specified and directed by Engr-in-charge. Note : Rate of item is deemed to be included for excavation in hard rock, by compressor machine to achieve required depth.
M&L for sand cousioning of UG cable/ at cable trenches complete all as specified and directed by Engr -in-Charge
M&L for brick protection with Class "B" Bricks Complete all as specified and directed by Engr-in-Charge.
S & F for GI tubing light grade 40mm bore, ISI marked, for cable protection in trenches/ walls Complete all as specified and directed by Engr-in-Charge.
S & F for and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core complete all as specified and directed by Engr - in - Charge.
Vastushilpa Contrustion
Aishwarya Constructions
godavari construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .