Wiring with installation of hexagonal cross arm fabricated in steel tubular pole for lighting and fixing of led flood light in hexagonal cross arm in 13 metre steel tubular pole in 3 numbers of 100 MT road in-motion weighbridge room at Balumath

Amount

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm.FRLS PVC Insulated copper conductor single core cable etc. as required. Group A for extension of point wiring

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front Including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type

Supplying and fixing brass batten/ angle holder including connection etc. as required

Wiring for circuit/submain wiring alongwith earth wire with the 2 X 1.5 sq. mm + 1 x 1.5 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.2 X 4 sq. mm +1 X 4 sq. mm earth wire.

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 6 sq. mm + 1 X 6 sq. mm earth wire

bracket/ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting,complete with all accessories including connections etc as required. (Led 21 Piece + Tube light 21 Piece)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, minlature circuit breaker single pole and neutral for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying & fixing suitable size Gi box wih modular plate and cover in front on surface of in recess Including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Providing and fixing 100 A rating and breaking capacity and 4 pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way, Double door

Providing of Onload Manual switch disconnector changer with sheet steel enclosure Type, 63 Amp

Supplying and fixing of following ways surface/recess mounting,vertical type, 415V, TPN MOB distribution board of sheet steel, dust protected, duly link, earth bar,din bar for mounting MCBs(but without MCBS and incomerjas required. (Note:Vertical type MOBTPDB is normally used where 3 phase outlets are required.) way (4+12), Double door Each

Surge Protection device (SPD) 230 Volt, Single phase, Class-1, Class 1 + Class II Combination: Voltage switching and voltage limiting, IP20

Supplying and fixing Cable End Box(Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240Volts,on surface/recess, complete with testing and commissioning etc. as required.

Providing for fixing of 25 sqmm single core flexible copper cable earth pit to SPD (3 X 15 Mtr)*5% wastage)

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning sto as required 40 A

Supplying and fixing 5 amps to 32 amps rating, 240/415volts, "C" curve, miniature cuit break suitable for Inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required. Single pole & neutral

Providing and fixing earth bus of 50mm X 5 min cupper strip on surface for connections etc as required (0.5*3)*5% wastage) = 1.375 mtr

Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.

Providing of 16 sq mm 4 coreisi marked, upto 1.1 kv grade Alluminium armoured cable for laying service wire

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of size not exceeding 35 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. As required

Supply of wall mounted fan size 400 mm

Supplying and fixing of 32 mm dia X 2.00 metres long Gl.pipe (medium class) bracket for mounting of fluorescent/HPMV/HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and

Providingand fixing 25mmX5mm G.I.strip in 40mm dia G.I.pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc.as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.with charcoal/coke and salt as required.

Erection of metallic pole of length above 10mtr and upto 12 mtr in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

upply of 50 mm x50 mm x 6 mm angle & 16 mm plate & fabrication of same for hexagonal cross & base of pole like cutting, welding, drilling etc.

12/13 metre steel tubular pole Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats for New work

Total impact of GST for the purpose of CTC