REPAIR / REPLACEMENT OF JOINERY, PLUMBING FITTINGS ETC. AND ALLIED B and R IN MD/OTM ACCN OF 2/3 GR AT DHANA.

Amount

Taking down wooden chowkhats or frame area exc 1.5 Sqm and not exc 4 Sqm Each with shutter (without taking off shutter from frame) etc, complete as specified and directed.

All as per item No 1 above but not exc 1.5 Sqm Each etc, complete as specified and directed.

Taking down wooden shutter of any description exc 1 Sqm and not exc 2 Sqm Each etc, complete as specified and directed.

Supply & fixing 2nd class hard wood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete including treating the ends of chowkhats with coal tar/black paint etc, complete as specified and directed.

Supply & fixing 105 x 60 mm size Pressed steel frames 1.25mm thick for doors with one rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete as specified and directed.

Supply & fixing 165 x 60 mm size Pressed steel frames 1.25mm thick for doors with two rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete as specified and directed.

Supply & fixing 35mm thick factory made second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze with sash bars, edges of framing plain fitted with cut and mitred beads (all around of Ist class soft wood) for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(b) fitted to chowkhats, complete as specified and directed.

Supply and fixing 35 mm thick 2nd class HW plain, framed, factory made panelled shutters (two panels), with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), cleaned seasoned and chemically pressure treated etc, complete as specified and directed.

Material & labour in repair 18/19 mm thick pre-laminated particle board, interior graded, pre-laminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cupboard with teak beading of all sides complete all as specified and directed.

Supply & fixing solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in door opening as per specification and drawings and making good with plastering in CM 1:4 including distempering as required at site complete all as specified and directed. Make :- M/s Rajshri plastiwood / M/s Sintex Industries Ltd.

Supply & fixing factory made solid panel PVC door shutter 30mm thick (style ) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame with and including 3nos aluminium alloy hinges at site as per specification & drawing complete as specified and directed. Make :- M/s Rajshri plastiwood / M/s Sintex Industries Ltd.

Supply & fixing steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded, complete as specified and directed. Make :- M/S Metro Industries,M/S Sen-Harvic , M/S Shiv Mullar

All as per item No. 12 above but without glazing bars complete all specified and directed. Make :- M/S Metro Industries,M/S Sen-Harvic , M/S Shiv Mullar

Steel ventilator with top hung shutter including hinges, steel peg stay, etc, complete as specified and directed. Make :- M/S Metro Industries, M/S Sen-Harvic , M/S Shiv Mullar

Material & labour for mild steel work in framed work such as grills, gratings, guard bars etc., including angle frame and hinges where required with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290.Gde-E-165, complete all as specified and directed.

Material & labour for Mild steel 0.63 mm thick plain black sheet in wall cladding, steel gates and similar work cut to size holes punched including round haded screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams including bending or turning up mitered angles etc as requires.

Material and labour for framed work Fe 410-W (Grade - E-250) as in door or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings etc, complete as specified and directed.

Supply & fixing in repairs sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in Each panel 3 mm thick complete all as per specified and directed. Make:- Modiguard / saintgobin / Hariyana glass

Supply & fixing sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in Each panel 3 mm thick complete all as per specified and directed. Make:- Modiguard / saintgobin / Hariyana glass

Supply & fixing galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed.

Supply & fixing in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed.

Supply and Fixing of Stainless steel Drapery Rods (curtain rods) of 25 mm dia along with all accessories as per requirements such as Holding Bracket, Finials (End capping), screws, fissures etc. Including fixing of same on the desired door windows locations on all floors and in any length etc, complete as specified and directed.

Supply and fixing 100 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with screws etc, complete as specified and directed.

Supply & fixing 150mm extruded aluminium alloy handles, fabricated type anodized complete as specified and directed.

Supply & fixing 150mm long aluminium anodised barrel tower bolt of extruded section complete as specified and directed.

Supply & fixing 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast of extruded sections and fixing bolt and sliding bolts of extruded sections of cast aluminium alloy etc, complete as specified and directed.

Supply & fixing 500 ltr capacity rotational mounded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 15mm bore PVC float valve high pressure with epoxy coated aluminium rod and high density plastic valve screwed for iron pipe complete and disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity and removing outside MD land etc, complete all as specified and directed. Make :- Sintex, polywell, Rotex

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store etc, complete as specified and directed.

Supply & fixing steel water tubing medium grade galvanizes fixed to walls, floors, roof ceiling etc including all tube fittings of 15mm bore complete all as specified and directed. Make :- Tata, Swastik, Surya prakash

Supply & fixing in repair 15mm bore ball valve, high pressure with epoxy coated aluminium rod and high density plastic valve screwed for iron pipe and fixed of 20mm dia (min wt 210 grms) complete all as specified and directed. Make :- Prayag, polytuff or Shakti

Supply & fixing in repair vitreous china wash basin white flat back size 550x400mm excluding 15mm dia fancy type PVC pillar taps, PVC waste pipe, PVC waste coupling brackets, PVC connections 15mm dia 450mm long complete all as specified and directed. Make :- Hindware, Parryware ( superfine), Cera (Ist quality)

Supply & fixing in repair Bib tap 15mm standard of cast copper alloy with crutch or butterfly handle screwed down for iron pipe and fixed complete all as specified and directed.

Supply & fixing in repair 15mm stop valve standard of cast copper alloy with crutch or butterfly handle high pressure screwed for iron pipe and fixed complete all as specified and directed.

Supply & fixing in repair 15mm dia shower rose of PTMT any colour high pressure screwed for iron pipe and fixed (min wt 40 grms ) complete all as specified and directed. Make :- Prayag

Supply & fixing in repair PVC tank cover suitable for PVC tank of 500ltrs capacity including 2 x PVC brackets complete all as specified and directed.

Supply & fixing HDPE pipes or pressure rating 6kgf/sqcm of 40 mm dia fixed/concealed on walls or floors complete all as specified and directed.

Supply & fixing in repairs vitreous China squatting pan, 'Orrissa' pattern, size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern, flush pipe and waste pipe) and ‘P’ or ‘S’ trap front or back inlet including concrete bedding, complete all as specified and direrected. Make :- Hindware, Parryware ( superfine), Cera (Ist quality)

Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern ) white including plastic water closet set black closed pattern with flat bottom and cover with mild steel chromium plated hinging devices and chromium plated Jet arrangement with 1.00 mtr long flexible pipe for fixed with suitable system complete all as specified and directed.

Supply & fixing as in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve , float and handle including brackets, and PVC connection 15mm dia complete all as specified and directed. Make :- Hindware, Parryware ( superfine), Cera (Ist quality)

Material & labour for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer complete all as specified and directed.

Material & labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

Demolition of brick / stone masonry built in cement mortar, complete all as specified and directed.

Material & labour for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

Material & labour for 15mm rendering thick in CM (1:4) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), including preparing new plastered surface of wall and applying two coats of white wash etc, complete all as specified and directed.

Material and labour for rendering 15mm thick in CM(1:6) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement) including preparing new plastered surface of wall and applying two coats of white washetc, complete all as specified and directed.

Material & Labour for preparation of old decorated surface of walls including corners, pillars etc by washing, scraping, rubbing & brooming down and applying one coat of Oil bound distemper including filling of minor holes/cracks with putty & removing nails etc, complete all as specified and directed.

Material & Labour for Preparation of old surface and two coats of white wash on ceiling complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and paving’s not exceeding 15 cm thickness. (below or above ground level), complete all as specified and directed.

Material & labour for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth with using extra cement, complete all as specified and directed.

Supply & fixing glass dividing strips, 38 x 3 mm thick and inserted in position, confirm to design, complete all as specified and directed.

Material & labour for 50mm thick cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m in forming and at every change of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and directed.

Dismantling of tiles of any descriptions in floors or dados etc. including cement mortar bedding (but not backing) etc, complete all as specified and directed.

Material & labour for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in cooking platform etc. and other similar situation complete all as specified and directed.

Material & labour for non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of Each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match colour including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

Material & labour for glazed ceramic tiles in vertical surfaces 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match colour over 10mm thick rendering in CM (1:4) complete all as specified and directed.

Material & labour for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

All as per item No. 59 above but on vertical surfaces, over 10 mm thick back coat in CM (1:4) etc, complete all as specified and directed.

Material & Labour for preparation of old decorated surface of walls including corners, pillars etc by washing, scraping, rubbing & brooming down and applying one coat of snowcem (cement based paint) on external wall surfaces complete all as specified and directed.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 16,852.00 /- ]

d k suppliar

Pandey Construction and Engrs

M/S JAINENDRA KUMAR JAIN