Loading…
Loading…
Tender Value
₹4.0 L
EMD Value
₹8,000
Closing Date
5 Feb 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
ELECT G
12 conditions · 1 needing a document upload
(i)For participating in tender for an electrical nature of work, the contractor shall have to possess valid Electrical License of appropriate voltage issued by any State Government under clause 45 of compilation of rule of Indian Electricity rules 1956 or as amended from time to time. Electrifications of 11 KV and above including OHE, "A" class electrical contractor license is essential. (ii) The license can be possessed with one of the partners or in his own name if sole proprietor. Firm should submit a self-attested copy of the electrical contractor license along with the offer, otherwise, the offer will be summarily rejected
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
13 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested by which they/he is qualifying the Qualifying criteria mentioned in the tender document. It will not be obligatory on the part of tender committee to scrutinize beyond the submitted document of tenderer as far as his qualification for the tender is concerned. The railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
No post tender correspondence shall be entertained after closing of tender even Suo moto post tender letters of the tenderers shall be treated as null/void.
The tenderers are required to observe the website to find out if any correction slips issued subsequent to uploading of the Tender . Railway reserves the right to make any additions/alterations to the tender uploaded and issue corrigendum to the same effect. In case the tenderer fails to take note of the above corrigendum, the additions and alterations entered/effected in the corrigendum shall be binding upon the tenderer and no claim what so ever will be entertained by Railway.
The tenderer should upload the documents carefully. The documents uploaded by tenderer should be clearly visible and in legible format.
Indian Railways Standard General Conditions of contract 2022 along with correction slips corrected up to date of closing of tender and the attached documents are part of the tender document.
The offers which are incomplete, without supporting documents, unsigned, conditional, will be summarily rejected.
As per letter No. 2022/CE-I/CT/GCC/Correspondence/ New Delhi, dated 14.05.2024 "On IREPS Module , a facility has already been created for online submission of Annexure-V. Therefore, the provision of downloading of Annexure-V of GCC & uploading of physically signed Annexure-V by tenderer had been discontinued on IREPS"
Setting up of sub - SOC( Security Operation Centre) at zonal HQ for cyber security in jabalpur division
JBP-L-T-No-46-2025~WCR
JBP-L-T-No-46-2025
Open
Works - General
4 Months
Jabalpur, Madhya Pradesh
₹0
₹8,000
5 Feb 2026
14 Jan 2026
22 Jan 2026
55 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 4,00,832.96 | ||
| — | Breakup for | details. | — | ||
| Supply erection and commissiong of SDB for light and fan. TPN DB 4 way (8+12) IP- 43 , IK-08 withmetal door, earthing, isolated nuteral bar with ELCB, RCCB , 32A TPN incomer and outgoinghaving 5 x 10A SPMCB and 5 x 6A SP MCB make- L&T, Legrand, ABB or equivailent | — | — | — | 10,629.48 | |
| — | Breakup for | details. | — | ||
| SDB for Power. TPN DB 4 way (8+12) IP-43 with metal door, with 63A TPN incomer and outgoing having 5 x 32A SPMCB and 5 x 20/16A SP MCB. Make- ABB, Legrand, L&T, Hager, Schnider, or simillar make | — | — | — | 12,080.92 | |
| — | Breakup for | details. | — | ||
| Circuit wiring with 2 x 6 sqmm copper multistarnded stranded wires (SDB panel to SB) and copper wire2.5 sqmm green in clour for earth ( 2 x 6 sqmm + 1 x 2.5 sqmm) in PVC casing caping/concealedconduit as required at site.Make- Havells, Polycab, Plaza Cables , finolex or equivailent | — | — | — | 4,152 | |
| — | Breakup for | details. | — | ||
| Circuit wiring with 2x4 sqmm copper multistranded wires (SDB panel to SB) and copper wire 1.5 sqmm green in clour for earth(2x4 Sq mm +1x1.5 Sq mm) Make- KEI, RR Cable, Finolex , Polycabe or simillar make | — | — | — | 7,337.5 | |
| — | Breakup for | details. | — | ||
| Circuit wiring with 2x2.5 sqmm copper multistranded wires (SDB panel to SB) and copper wire 1.5 sqmm green in clour for earth(2x2.5 Sq mm +1x1.5 Sq mm) Make- KEI, RR Cable, Finolex , Polycabe or simillar make | — | — | — | 8,712.5 | |
| — | Breakup for | details. | — | ||
| Cable laying on wall /pole and other similar places fixing using MS flat [25x6mm.]clamps, nuts, bolts,screws or nails as per site requirement | — | — | — | 3,648 | |
| — | Breakup for | details. | — | ||
| Cable route marker; Supply & providing cable route markers marked with L.T./H.T. cable as required as perrelevant IS & at every turning points/road crossings | — | — | — | 123.22 | |
| — | Breakup for | details. | — | ||
| Point Wiring : This includes provision of wiring with 1.5 sqmm copper starnded PVC insulated wire [ L & N and earth ]from MDB/SDB/ Board to light & fan control board and provision of control switch on common light and fan control board , together with wiring from control board to ceiling rose and provision of ceiling rose on board ; with earth continuity wire; independent for each fitting. Cost of this item is inclusive of distributed cost of common board & wiring from MDB/SDB/Board to common board in addition to items specifically mentioned Make- Legrand, L&T, ABB, or equivailent | — | — | — | 20,188.3 | |
| — | Breakup for | details. | — | ||
| Supply erection and commissioning of 6A 5/3 pin socket point on fan and light control board make- ABB, Legrand, L&T, Schnider or equivalent | — | — | — | 706.3 | |
| — | Breakup for | details. | — | ||
| 16A & 6/3 pin socket point on separate circuit and board. make- ABB, Legrand, L&T, Schnider or equivalent | — | — | — | 4,558.8 | |
| — | Breakup for | details. | — | ||
| Cutting of wall for insertion of 1" dia UPVC conduit, fixing hardwares for fixing the conduit along with its supply and then replaster it with cement and sand mixture and then painting with matching colour as per existing colour of the wall. Proper joints in pipes, bends/elbows/ junctions are to be provided as per site requirement. | — | — | — | 9,555 | |
| — | Breakup for | details. | — | ||
| Supply & Erection of C/Fan, High energy efficient 5 star rated BLDC fan with regulator, having sweep size 1200mm, operating voltage 140-270, maximum hourly power consumption of 32W with double ball bearing and Airflow minimum CMM220, suitable down rod , Metal fan hook, flexible Pipe, with all necesaary arangment make- Atomberg, Havells, CG or equivailent,Sample will be approved comptent authorty before supply | — | — | — | 21,066.3 | |
| — | Breakup for | details. | — | ||
| Supply Exhaust Fan 380 mm Metal Number of pole (in Nos.) 6Number of blades 3 , Power factor 0.9 ,and Erection of E/Fan 380mm sweep including Nut ,bolts, fastner etc Make- Usha, Anchor, Bajaj or equivailent Sample will be approved comptent authorty before supply | — | — | — | 5,263.48 | |
| — | Breakup for | details. | — | ||
| Supply and Erection of T-5 fittings/Batten type 4 feet T-8 LED / 4feet led retrofit fitting with LED tube lamp 20 W Make- Havells, bajaj, CG, or Simillar Sample will be approved comptent authorty before supply | — | — | — | 926.28 | |
| — | Breakup for | details. | — | ||
| Concealed metal box boards Supply, fixing of concealed metal box boards + modular sheet platesuitable for modular switches/sockets/regulator/AC point/Geyser etc. front open type (for concealedwiring). This includes masonry work happened at the time of execution of the work and its associatedrepairs. All material required for this job will be supplied by contractor. : Four module box of HPL,legrand, indoasian, or equivalent | — | — | — | 385 | |
| — | Breakup for | details. | — | ||
| Concealed metal box boards Supply, fixing of concealed metal box boards + modular sheet platesuitable for modular switches/sockets/regulator/AC point/Geyser etc. front open type (for concealedwiring). This includes masonry work happened at the time of execution of the work and its associatedrepairs. All material required for this job will be supplied by contractor. : Six module box of HPL,legrand, indoasian, or equivalent | — | — | — | 925.08 | |
| — | Breakup for | details. | — | ||
| Concealed metal box boards Supply, fixing of concealed metal box boards + modular sheet platesuitable for modular switches/sockets/regulator/AC point/Geyser etc. front open type (for concealedwiring). This includes masonry work happened at the time of execution of the work and its associatedrepairs. All material required for this job will be supplied by contractor. : Eight module box of HPL,legrand, indoasian, or equivalent | — | — | — | 944.64 | |
| — | Breakup for | details. | — | ||
| Concealed metal box boards Supply, fixing of concealed metal box boards + modular sheet platesuitable for modular switches/sockets/regulator/AC point/Geyser etc. front open type (for concealedwiring). This includes masonry work happened at the time of execution of the work and its associatedrepairs. All material required for this job will be supplied by contractor. : Twelve module box of HPL,legrand, indoasian, or equivalent | — | — | — | 1,183.4 | |
| — | Breakup for | details. | — | ||
| PVC conduit 25 mm dia as per IS-9537 with suitable clamps fixtures, nuts & bolts etc | — | — | — | 3,983.75 | |
| — | Breakup for | details. | — | ||
| Pipe earthing as per IS 3043 | — | — | — | 2,528.03 | |
| — | Breakup for | details. | — | ||
| Concealed Wirings:25A/32A MCB and socket for air conditioner / Geyser/ Water cooler:(modular) Make- Schnider, Phillips, Orient, Bajaj,Crompton or equivalent | — | — | — | 4,457.16 | |
| — | Breakup for | details. | — | ||
| Supply, fixing, testing and commissioning of 1.5 Ton 5 Star rating Split AC, single Phase, dust filter, makeMitsubishi Heavy, O-Gernal, daikin, Samsung or equivalent with suitable size of stand. Metallic cage,copper tube as per site requirement, and all otheraccessories required for installation. | — | — | — | 2,05,764.88 | |
| — | Breakup for | details. | — | ||
| Extra Refrigerant Pipe For Air Conditioners Suitable for 1.5 Ton / 4500 Kcal/hr | — | — | — | 26,480 | |
| — | Breakup for | details. | — | ||
| Supply erection and commissiong of 2*2 light 36W led fitting make-Orient, Wipro, Syska or equivalentBefore supply sample will be approved by consignee. | — | — | — | 28,564.5 | |
| — | Breakup for | details. | — | ||
| Supply and erection of 50 mm dia GI pipe B class. | — | — | — | 1,194.06 | |
| — | Breakup for | details. | — | ||
| Supply & erection of 8 SWG GI wire | — | — | — | 107.26 | |
| — | Breakup for | details. | — | ||
| Supply, installation, testing & commissioning of 20 Amp AC box 1x25 No motor starter modular type switch and1No 16/20 A RCBO power supply to AC | — | — | — | 15,367.12 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
AC08to10.pdf
ATTACHMENT
Allcorrectionslip.pdf
ATTACHMENT
46-2025tenderdoc.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .