ADDITION ALTERATION TO BLDG NO T 118 TRAINING SHED OF INFANTRY BATTALION NUMBER TWO AT BRICHGUNJ MIL STATION PORT BLAIR

Amount

M&L for removing loose and broken concrete by chiselling/picking etc upto a depth of 50 to 80mm from column/ beams and similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles including necessary scaffolding etc and removal of debris to a distance not exceeding 50m, complete all as specified and directed by Engr-in-Charge.

M&L for applying one coat of anti corrossive primer @ 0.25 Lit/Sqm for the steel area to exposed old and new reinforcement to the full circumfrance and length of bars to form unbroken 40 Micron thick film all as specified and directed by Engr-in-Charge.

M&L for applying one coat epoxy bonding agent @ 2.6 sqm/lit or as per manufacture’s instruction to old concrete surfaces of columns, beams and similar structural members all as specified and as directed. Make: fosroc/ bostik/ STP

M&L for non shrink, cementitous micro concrete mixed with 12.5 graded stone aggregate using Renderoc RG or equivalent by weight (18 Kg Aggregate : 25 Kg Renderoc RG) respectively (as per manufacturer’s instruction) laid in average thickness 80 to 100 mm in surface, including necessary watertight form work complete all as specified and directed. Make: fosroc/ bostik/ STP

M&L for spraying curing compound as per manufactures instruction on freshly cast concrete surfaces complete all as specified and directed. Make : Concure WB white of Fosroc or equivaent in bostik /STP

M&L mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips

M&L Mild steel TMT bars 6 to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets of any thickness in roof coverings complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI baesd plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.

Dismantling mild steel work of any description not otherwise provided as specified and directed by Engr-in-Charge.

M & L Fe 410 -W (GdeE- 250) quality "A" Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc specified and directed by Engr-in-Charge.

M&L for 2 coats of synthetic enamel painting over a coat of red oxide zinc chrome primer incl preparation of new or previously untreated steel surfaces of any description over 10cm width or girth specified and directed by Engr-in-Charge.

M&L for painting one coat of synthetic enamel paint including preparation to previously treated old steel surfaces of any description, not otherwise described, over 10 cm width or grith all as specified and directed by Engr-in-Charge.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc specified and directed by Engr-in-Charge.

S & F designer coloured glazed ceramic tiles 350mm x 450mm, 6-7mm thick on vertical surfaces such as skirting & dados etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces etc including backing coat of 10mm thick CM 1:3 specified and directed by Engr-in-Charge.

M&L non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 20mm thick screed bed in CM 1:4 specified and directed by Engr-in-Charge.

Taking down cement plaster of any description from wall/ceiling/screed bed including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.

M & L for rendering 5 mm thick in CM 1:4 over backing coat of 10 mm thick in C M 1:6, finished even and smooth without using extra cement etc complete. mixed with water proofing compound @3% by weight of cement and finished even and smooth without using extra cement all as specified and directed (WPC shall be measured and paid separately).

Supply only Integral water proofing compound

M& L for two coat of weather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer on newly plastered wall surfaces including preparation of surfaces etc complete all as specified and as directed.

M&L for two coats of weather proof exterior acrylic emulsion paint with anti fungal property on old painted wall surfaces over a coat of primer including complete removal of existing treatment of any description all as specified and as directed. (Make : Apex Ultima)

M&L for two coats of oil bound distempering to new plastered wall surfaces over a coat of primer including preparation of surfaces.

M&L for oil bound distempering two coats over a coat of primer including preparation of surfaces old decorated, plastered or unplastered surfaces of wall complete all as specified and directed by Engineer - in -Charge.

M&L for false ceiling with aluminium grid work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle and suspended with 3.15mm dia, GI wire, hooked to roof with needful adjustment bolts at an interval of 1.20m, centre to centre staggered and board with Eco board, decorative type, size 600x600x4mm thick, finished with two coats of oil bound distemper over a coat of primer on exposed surfaces, complete all as specified and as directed by Engineer-in-Charge.

S & F in repair aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/ partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, all as specified and as directed.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only sheet glass 4 mm thick ordinary quality glass pane exc 0.50 sqm in each panes. and glazing with PVC rubber gasket suitable for aluminium framing complete all as directed.

Supply only 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on one side with decorative choice lamination and other side white lamination fixed to Aluminium frame etc all as specified and directed by Engineer-in-Charge .

Supply only aluminium alloy wire mesh 0.45 nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as directed by Engineer-in-Charge.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-21 100mm Size

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed of size 150 mm

S& F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy

S&F mild steel flat iron 40 x 3mm as in wind tie including all necessary drilling, bolting or riveting etc., confirming to Fe 290.

S&F floor door stoper of length 140mm of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

M & L for post construction anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 course sand) to match existing floors.complete all as specified and as directed by Engr-in-Charge.

M&L for precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, type C1 (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

S&F Door closer hydraulically regulated, aluminium extrected sec body designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position incl floor tiles etc complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC 1:3:6, type C2, (Using 40 mm graded stone aggregate), 75mm thick as in plinth protection, finishing surface fair and even, in panels & filling joints with mortar, etc., complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/ aluminium Point wiring (light/ fan/ socket) complete including fitting and fixtures such as switch, socket etc complete all as specified and as directed.

M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC conduit and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc., all as specified and as directed for One light point controlled by one switch.

All as per item No. 45 here - in - before but for 3 pin 5 Amps switch socket combination on independent board.

S&F PVC ceiling rose surface type three terminals type

Supply and fix in repairs switch socket outlet 3 & 2 pin (multi pin) 5 amp flush type.

Supply and fix in repairs switch piano flush button single pole one way 5 amp.

Supply and fix in repairs energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected by Engr-in-Charge.

Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed by Engr-in-Charge.

Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed by Engr-in-Charge.

Supply and fix in repairs MCB single pole, 240 volts, 6 to 32 Amps, all as specified and as directed by Engr-in-Charge.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work including taking out old earthing complete all as specified and directed electrical plate No. 3 of SSR part - I

Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2Core 10 sq mm including taking out old cable complete

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out Soft/loose Soil

Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25cm soil / hard dense soil.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point Soft Soil / hard dense soil

Supply and filling pulverized stone dust to the full width of trenches for protection of cables including sperading and punning down including watering consolidation complete all as specified and directed.

Supplying and laying unreinforced precast cement concrete cable cover Class LV, Type I, flat, size 250mm x 150mmx40mm in trenches for cable protection embossed with Electric on the top surface complete all as specified and directed

M/s Saina Enterprises

RADHA GOVIND CONSTRUCTION

DEEPAK AGENCIES

ANITA VARMA ENTERPRISES

M/s S U Enterprises

Nirman Construction Company

M/s Kamal Electrical