Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.1 LAccepted-AOC 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹16.0 L+₹1.5 L (10.1%)Rejected-AOC | L2 | Rejected-AOC OTHER THAN LOWEST BIDDER | |
| 3 | L3₹16.2 L+₹1.7 L (11.5%)Rejected-AOC | L3 | Rejected-AOC OTHER THAN LOWEST BIDDER | |
| 4 | L4₹16.4 L+₹1.9 L (12.8%)Rejected-AOC | L4 | Rejected-AOC OTHER THAN LOWEST BIDDER | |
| 5 | L5₹19.6 L+₹5.1 L (34.9%)Rejected-AOC | L5 | Rejected-AOC OTHER THAN LOWEST BIDDER |
Tender Value
₹20.5 L
EMD Value
₹41,000
Closing Date
5 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE
HQ CWE Rajouri PIN-900129 C/o 56 APO
PROVN OF ADDITION / ALTERATION TO TOILET BLOCK (T-16 AND T-17) UNDER AGE(I)CIF (R).
2022_MES_556317_1
CANO-CWE/PAL-56/2022-23
Open Tender
Civil Works
Item Rate
180 days
AOR of AGE (I) CIF (R)
Class E category a(i)
9 documents required · 9 mandatory
₹500
AGE (I) CIF (R)
₹41,000
Yes
29 Nov 2022
7 Oct 2022
12 Nov 2022
7 Oct 2022
5 Nov 2022
22 Oct 2022
Amount
B&R PORTION:- Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified.
Dismantling framed trusses span n.exc 10m complete all as specified.
Taking down cement plaster or cement lime mortar any description on brick or stone wall, etc including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level including stone/tiles any type complete all as specified and directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by engr-in-charge.
Taking down chowkat or frame with shutters n.exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store, bore of pipe 15mm complete all as specified and directed by Engineer-in-Charge.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store, bore of pipe 20mm complete all as specified and directed by Engineer-in-Charge.
M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 using old size bricks complete all as specified and directed by Engr-in-charge.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified.
S&F steel work in tubular trusses including special shaped washer and structural steel is painted with one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor's workshop, etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed by Engr-in-charge.
S&F mild steel tubular work in purlins, vertical posts, rafters,etc including special shaped washer and structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor's workshop, etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed by Engr-in-charge.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by engr-in-charge.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall or in ridge, fixed with self tapping screws as specified.
S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in sub floor finished even and rough to receive the topping layer, complete all as specified and directed.
M&L for 50mm thick cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate) as in sub base finished even and rough to receive the topping layer, complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-25mm thick laid over & including 20mm thick cement screed base in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified.
M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in sub floor finished even and rough to receive the topping layer, complete all as specified and directed.
M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded crushed stone aggregate) as in plinth protection finished even and fair, complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed by Engineer-in-charge.
M&L for preparation of new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed by Engineer-in-charge.
M&L for preparation of new plastered surfaces and applying two coats of white wash on ceilings complete all as specified and directed by Engineer-in-charge.
M&L for joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick square/ rectangular) laid over & including 15mm thick screed bed in cement mortar 1:6, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed by Engr-in-charge.
M&L for joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick square/ rectangular) laid over & including 15mm thick screed bed in cement mortar 1:6, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed by Engr-in-charge.
M&L for joint free glazed ceramic coloured tiles in vertical surface 300x200x7 mm thick laid over & including 10mm thick plaster in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, complete all as specified and directed by Engr-in-charge.
M&L for Glazed ceramic coloured tiles in vertical surface 350x250x 7 mm/450x350x7mm thick laid over & including 10mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, complete all as specified and directed by Engr-in-charge.
S&F solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified.
Taking down chowkat or frame with shutters n.exc 1.5 sqm each (without taking off shutters from the frame) and refixing in the same opening complete all as specified and directed.
S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed by Engr-in-Charge.
S&F Extruded aluminium alloy handles, fabricated type, anodised 100mm size complete all as specified and directed by Engr-in-charge.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250mm complete all as specified.
S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-charge.
M&L for preparation of old treated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by engr-in-charge.
Cutting chases, pinning in, making good to facinngs where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth complete all as specified and directed.
S&F Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified.
Description all as per item No 43 above but of size of 20mm bore.
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), 15mm bore of pipe complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), 20mm bore of pipe complete all as specified and directed.
S&F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
S&F 15mm dia fancy type, chromium plated with long shank and cup (concealed type) stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F 15mm dia Chromium plated bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe fixed as in repairs including taking down old tap of any description complete all as specified and directed.
S&F vitreous china squatting pan (Orissa pattern), size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding as in repairs complete all as specified and directed by Engr-in-charge.
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to steel pipe or union, 20mm bore dia of pipe complete all as specified and directed.
S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-charge.
S&F brass chromium plated tubular towel rail 20mm dia `D' type 60cm long between flanges complete all as specified and directed by Engr-in-charge.
S&F towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastics cleats. (Minimum weight 90 gms) complete all as specified and directed by Engineer-in-charge.
S&F sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
M & L for providing cement concrete cast in situ type B-1, 1 : 2 :4 ( 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span including necessary formwork complete all as specified and directed by engr in charge. (Note : Reinforcement shall be measured and paid separately)
M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-charge.
M&L for cement concrete type B-1 1:2:4 (20mm graded stone aggregate) in bed plates, copings, etc incl necessary form work complete all as specified and directed by Engr-in-charge.
S&F mild steel framed work of tubular section such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to IS 4923 : 1997 complete all as specified and directed by Engr-in-charge.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal/sloping), fair finished surfaces concrete flat complete all as specified and directed by engr-in-charge.
S&F mild steel TMT bars 10mm dia and above, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with and including MS wire annealed not less than 0.9mm dia complete all as specified and directed.
Description all as per item No 61 above but 6mm to 8mm dia.
S&F PVC (SWR) P trap 110mm bore complete all as specified and directed.
S&F 110mm bore PVC (SWR) WC connector with lip ring complete all as specified and directed by Engr-in-charge.
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed by Engr-in-charge.
S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls as a vent pipe complete all as specified and directed by Engr-in-charge.
S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed by engr-in-charge.
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed by engr-in-charge.
S&F 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by engr-in-charge.
S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by engr-in-charge.
M&L for PVC (SWR) floor trap, plain with grating 75mm diameter of outlet, setting and jointing with solvent cement complete all as specified and directed.
M&L for preparation of old plastered surfaces and applying one coat of cement base paint on walls complete all as specified and directed by Engineer-in-charge.
S&F low level 10 ltrs capacity PVC valveless symphonic action type flushing cistern white with inlet ball valve float oval handle including 32mm dia PVC flushing pipe as in repairs complete all as specified and directed by Engr-in-Charge.
Angle cock cast copper alloy chromium plated with wall flange, complete all as specified and directed. Make:-CERA Cat. No. F1003201 or equivalent cat part of make as specified in list of make here-in-after.
M&L for 50mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in sub floor finished even and rough to receive the topping layer, complete all as specified and directed.
M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over & including 20mm thick screed bed in cement mortar 1:6 and pointed in white or colour cement to match complete all as specified and directed by Engr-in-charge.
S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) as in repairs complete all as specified and directed by Engineer-in-charge.
S&F PVC connections 15mm size with PTMT nuts of length 300mm as in repairs, complete all as specified and directed by Engineer-in-charge.
Supply and fixing 15mm dia Pillar taps, cast copper alloy with capstan heads Chromium Plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for iron pipe but fancy type and fixed etc complete all as specified and directed.
Dismantling water tanks of capacity exc 500 ltrs and n.exc 1000 litres and removing to store including S&F of 1000 litre Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed by Engineer-in-charge.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in & including cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed by Engineer-in-charge.
S&F Vitreous china urinal partition white of size 310x700 mm fixed to wall, complete all as specified and directed by Engineer-in-charge.
S&F vitreous china wash basin, oval shaped white, excluding taps, chain and plug and porcelain stopper but including brackets, waste coupling, etc size as decided by Engr-in-charge complete all as specified and directed.
S&F 15 mm dia angle stop valve of PTMT any colour pressure screwed for iron pipe and fixed (minimum weight 15mm - 90 gms) as in repairs complete all as specified and directed.
S&F in repair PVC waste pipe flexible for wash hand basin/urinal any size complete all as specified and directed by engr-in-charge.
E&M PORTION:- Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.
Point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLSH PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLSH PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including medium grade rigid non metallic PVC concealed conduit of suitable size in wall after cutting chases in wall with sunken galvanised pressed steel box of thickness not less than 2mm of appropriate sizes suitable for modular switch/ socket including inner and outer white cover plate with all requisite accessories such as PVC elbow, Tee, collars, bends etc. complete all as specified and as directed for the following :-
One light/fan point controlled by one way switch by one way switch 6 Amp 240 Volt, complete all as specified.
One 3 pin 6 Amp socket out let on the same board with other switches with cables 1.5 sqmm, complete all as specified.
Modular switch single pole one way 6 Amps 1 module complete all as specified and directed.
Modular socket 6 A-2/3 pin combined 2 module complete all as specified and directed.
S&F in replacement Sheet metal Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB type C curve of capacity 25 Amps, 10 KA, complete all as specified and directed.
S&F Ceiling rose, surface bakelite 65x50mm three terminals PVC/Polycarbonate complete all as specified and as directed
S&F Endura Linear NEO wall mounted LED Batten 20 Watt LED with tube rod 1X20 Watt, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver completehosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting fixed in repairs, complete all as specified and directed. Make:-Havells Cat Part No:- ENDURALINEARNEOBS20WLED865SPCWH or Equivalent cat part of make as specified in list of make here in after.
S&F in replacement of PVC/ Polycarbonate lamp holder insulated body with back plate batten/angle type for batten fitting complete all as specified.
S&F Sheet metal enclosure factory made (Double door) for DBs, Triple pole and neutral, 415 volts, 4 way with bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning fixed in repairs, complete all as specified. Make:- Havells cat part No-DHDMTHODDW04 or Equivalent cat part of make as specified in list of make
S&F MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series fixed in repair, complete all as specified. Make:-Havells cat part No-DHMGCSPF006-032 or equivalent cat part of make as specified in list of make here-in-after.
S&F MCB triple pole & neutral 63 amps 415 volts 10 KA 'C' series fixed in repairs, complete all as specified. Make:-Havells cat part No-DHMGCTNF063 or equivalent cat part of make as specified in list of make here-in-after.
Supply and lay and testing cable XLPE insulated PVC bedded, galvanized steel strip or wire armoured 1100 volt grade 4 core 16 sqmm with stranded aluminium conductor all as specified and directed.
S&F Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron earth lead strip 25x4mm by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 40mm bore including GI medium grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame made out of 40x40x4mm, common salt, charcoal and testing on completion including taking down old unsv earthing, complete all as specified and directed.
S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed.
Supply and fix in replacement of electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, 15mm dia & not less than 600mm long PVC connection pipe etc. complete including taking out old geyser with all connection and deposited to MES yard all as specified and directed.
Exhaust fan made of steel body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm all as specified and directed.
Exhaust fan made of steel body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 450mm all as specified and directed.
S&F in replacement of LED Bulbs white /warm white (as per demand) in colour of 14/15 Watt, B-22 base Cap, complete all as specified. Make:-Havells Cat Part No:- LHLDDEEEML8R015 or Equivalent cat part of make as specified in list of make here in after.
S&F in replacement of sub main wiring with two run of single core PVC insulated FRLSH stranded copper conductor cable of size 4 Sq mm and one run of 4 Sq mm PVC insulated FRLSH copper conductor cable as earth continuity conductor drawn in and including PVC casing and caping with necessary accessories complete all as directed. Note : 2 Runs of 4 sqmm cable and one run of 4.00 sqmm earth wire with PVC casing and caping shall be measured as on length.
Excavation in trenches not exc 1.5 mtr wide and n. exc 1.5 m depth and getting out in any type of soil for laying UG cables and foundation of poles of various sizes, complete all as specified.
Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc25 cm in any type of soil, complete all as specified.
Removing surplus excavated materials to a distance n. exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified.
Supply and spread clean dry river sand in trenches ,ducts including leveling, punning for cushioning of cables all as specified Note : Punned thickness of sand cushioning shall be measured.
Brick covering with equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid, complete all as specified.
GI pipe medium grade 50 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts etc with fixing clamps of required size, nuts, bolts, washers etc. fixed, complete all as specified.
MEHTA OM PARKASH
arneesh kumar suri
M/S RAHUL GUPTA
M/s Anil Engineers & Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .