T-68

Erection, Installation, Shifting Commissioning of Single Pole/Double Pole of LT/HT Overhead Lines and Transformers By Completeing Works/Jobs As Per Respo Drawings/Estimate With Centralized And Decentralized Materials.Work Includes All Cartage, Carriage, T&P, Raw Materials And Any Other Material/Work Which Is Required For Completion of Said Work But Not Mentioned In This Boq/Estimate.

Carriage of 8.5/09/11 Mtrs Long PCC Pole from Store Center Mathura/Other Sites in District Mathura to Site of Work with Erection of Single Pole Structure Complete in all respect as per RESPO Norms (including all labour, T&P, grouting material etc arrenged by Contractor on his own cost).

Carriage of 09/11/13 Mtrs Long ST Pole from Store Center Mathura/Other Sites in District Mathura to Site of Work with Erection of Single Pole Structure Complete in all respect as per RESPO Norms (including all labour, T&P, grouting material, Paninting with Rex Oxide and Alluminium Paint etc arrenged by Contractor on his own cost).

Carriage of 8.5/09/11 Mtrs Long PCC Pole from Store Center Mathura/Other Sites in District Mathura to Site of Work with Erection of Double Pole Structure Complete in all respect as per RESPO Norms (including all labour, T&P, grouting material etc arrenged by Contractor on his own cost).

Carriage of 09/11/13 Mtrs Long ST Pole from Store Center Mathura/Other Sites in District Mathura to Site of Work with Erection of Double Pole Structure Complete in all respect as per RESPO Norms (including all labour, T&P, grouting material, Paninting with Rex Oxide and Alluminium Paint etc arrenged by Contractor on his own cost).

Construction of “T” pole for L.T./H.T. line on the erected pole as per RESPO manual and as per direction of supervising engineer. It including the cost of all labour, T&P, etc. required for proper completion of work.

Carriage of Stey Set from Store Center Mathura/Other Sites in District Mathura to Site of Work and Installation of with grouting and nuzzling etc. as per RESPO drawing along with all routine material to be used for such works.

Carriage of Earth Rod from Store Center Mathura/Other Sites in District Mathura to Site of Work and fixing earthing rod and binding with earth wire as per standard norms including cost of labour T&P and required material for such work.

Carriage and Laying, sagging stringing and binding of ACSR Weasel Conductor on the erected PCC pole/STP including jumpering as per RESPO manual.

Carriage and Laying, sagging stringing and binding of ACSR Rabbit Conductor on the erected PCC pole/STP including jumpering as per RESPO manual.

Carriage and Laying, sagging stringing and binding of Insulated ACSR Weasel on the erected PCC pole/STP including jumpering as per RESPO manual.

Carriage and Laying, sagging stringing and binding of Arial Bunch Conductor 3x50/95/120 sqmm on the erected PCC pole/STP including jumpering and making connections in all respects as per RESPO manual.

Carriage of of Distribution Box form Store Center Mathura/Other Sites in District Mathura with Fixing on the erected pole.

Carriage of 11 KV Drop Out Fuse Set/TPMO form Store Center Mathura/Other Sites in District Mathura with Installation on various capacity Transformers as per RESPO Norms.

Construction of plinth of 250/400 KVA T/f size 5'x5'x4' above ground level and one. Ft. below the ground level of 9" after excavation of 4 earth brick ballast shall be provided and hammering will be done properly. After that a retaining wall of 9 width by first class brick in ratio 1:4 of cement and sand shall be made. The earth shall be filled up to one ft. below the top of the plinth. after this brick ballast shall be provided upto 6 from the earth level and proper hammering shall be done. One No. Jall of 12 mm. MS tore shall be fixed in the hollow of plinth and one. Ft. thick RCC in ration of cement, sand and stone ballast shall be laid on the top of the plinth. The 12 mm. thick plastering shall be done all around the plinth in 1:4 ratio of cement and sand. The contractor shall be responsible to complete the work as per direction of Supervision Engineer. It includes the cost of all material, labour, T & P, carrier etc. required for proper completion of work.

Body and neutral earthing of 250/400 KVA transformers by digging pits 6" dia up to 3 mtr deep including inserting lowering 80mm dia G.I. and insert 50mm G.I. pipe chemical filled pipe (Pipe in pipe earthing) I.S.I. Mark B- Grade connecting with G.I. flat 50x6 mm Power Transformer to 80mm dia G.I. pipe and filling of chemical mixture around the G.I. pipe up to 3mtr. Including making of chamber.

Making of wire mesh fencing around constructed 250/400 KVA T/f plinth 4mtr. x 3 mtr. with proper grouting Erection and construction of Toe- wall around the transformer plinth including digging of pits and making wall 9 inch wide & 30 cm. under the ground level and 30 cm. up to the ground level and making pocket Filling the concreting for grouting of wire mesh fencing and plastering around the wall in ratio 1:4 cement and sand providing of one no. main gate in the wire mesh fencing for shifting the transformer size of gate 8 ft. x 4ft. including fixing of dandala for locking system, (Size of angle iron 50x50x6mm. and size of wire mesh fencing 1.5x2 sq. inch wire gauge 10 SWG.) All material/labour will be arranged by the contractor.

Making of 11 KV Guarding to proper alignment of two nos. GI wire parallel and lacings (tilli) at a distance at 2-3 mtrs. As per direction of supervising engineer/RESPO manual. It includes the cost of labour T&P carriage etc required for proper completion.

Dismentling of Various Capacity Transformer and Mounting to newly shifted Double Pole Structure/Plinth Including All Accessories required for mounting of T/F and Connection Thereof.

Dismentling of Iron Scrap i.e. Conductor/Clamp/Cross Arm/Clamp/AB Conductor (approx 11357 Kg.), ST Pole, PCC Pole, Transformers All. Wire etc. and its carriage to J.E. Store/Store Center Mathura as per direction by supervising engineer.

The contractor shall provide F clamps, D/P clamps, stay clapms, cross arm clamps, LT clamps, ABC clamps, suspension clamps, piercing connectors, I-hooks, dead end clamps, any other clamps, nut & bolts and shackle insulators without charging any extra cost, in case the same are not available in the stores. Contractor shall also provide/perform any contingent material/work at his own cost, which is not included in the boq/estimates but is required for execution/completion of the work. Further, any fabrication work, if required, shall also be carried out by the contractor at his own cost, for which no additional payment shall be admissible.