Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.2 LAccepted-Finance | L1 | Accepted-Finance Accepted | |
| 2 | L2₹3.1 L+₹87,348 (40.0%)Accepted-Finance | L2 | Accepted-Finance Accepted | |
| 3 | L3₹3.2 L+₹98,116 (44.9%)Accepted-Finance | L3 | Accepted-Finance Accepted | |
| 4 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹3.1 L
EMD Value
₹3,500
Closing Date
6 Dec 2024, 12:00 pmClosed
SE EDC SAMBHAL
132 KV COMPOUND HYDEL COLONY CHANDAUSI
ELECTRICAL WORK UNDER EDD SAMBHAL
2024_PVVNL_976375_1
25/2024-25/EDC SAMBHAL
Open Tender
Electrical Works
Lump-sum
30 days
CHANDAUSI
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
SE EDC SAMBHAL
₹3,500
Yes
9 Dec 2024
22 Nov 2024
6 Dec 2024
25 Nov 2024
6 Dec 2024
25 Nov 2024
Amount
Detail of Work regarding Sri Siddhi Vinayak Medical Collage 11 KV Line Connect to Town Sub Station Supply & Dismentling 11 KV line work of rural supply. (Connection A/c ID No. 6523222660, Sanction Load 250 KVA)
Safe carriage of the following material from Store Centre Chandausi to work site including loading and unloading at both ends.
13 Mtr./11 Mtr./9 Mtr./8.5 Mtr. Long PCC/ST Poles.
ACSR Dog Conductor (Size 1200x3=3600+3%+15)
11 KV XLPE cable of size 3 x 120 sq.mm.
Line material such as Dropper Chennel (100 x 50 x 2000) T-off Channel M.S. 100 x 50 x 1860 mm, 11 KV X-arm V-type, Stone Pad, 11 KV Polymeric Pin Insulator, 11 KV Polymeric Disc Insulator, 11 KV Disc Fitting, Earthing Road Complete, 11 KV 3 x 120 Sqmm. Jointing Kit, Stay Set Complete, M.S Base Angle for CT/PT Unit.
Dismantling of Double Pole Structure & metering cubical & Out door CT/PT Unit & Keep Safe Place including loading & unloading.
For 11 KV Line, Single support 11/9/8.5 Mtr. long ST/PCC Poles :-
For 11 KV Line, Single support 13/11/9/8.5 Mtr. long ST/PCC Poles Excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support (pole), providing and laying of stone pad (300x300x75mm.) in the bottom of the pit. Erection of support (pole) complete with fixing all other accessories by providing nuts & bolts etc. as per RESPO Norms.
11 Mtr. Long ST Poles.
8.5 Mtr. Long PCC Poles.
8.5 Mtr. Long PCC Poles for Stud
11 KV Line, Double Pole structure with 13/11/9/8.5 Mtr. long ST/PCC Poles Excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support (pole). Erection of support (pole) complete work by fixing of D.P. Clamps and all other accessories & Mounting & Fixing of 11 KV CT/PT Unit on Double pole including making proper connections.as per RESPO Norms.
Digging of tunch for making hole of under ground 11 KV line (Size 1.5 deep & 45 Cm width) & Providing 150 mm. sand cushion beneath and 150 mm. above the xlpe cable. The cable shall be duly protected by 1st Class Bricks, two on either side and third on top of the cable, laid in the series one after the other. Refilling and ramming of the left out soil, closing and trench and levelling. including providing of all required material and T&P.
Providing G.I. Pipe 6” dia for inserting 11 KV XLPE cable for safety of cable on Single/Double Pole by providing and fixing of MS Clamp, Nuts and Bolts & Laying of Under Ground 11 KV XLPE Cable Size 3 x 120 Sq.mm , sagging, stringing and binding of with all other accessories on pole as per RESPO Norms.
Filling and fixing of 11 KV outdoor/indoor type cable jointing kits/Jointing Including Connection both side as per RESPO Norms.
Grouting of Poles Single line support, Double Poles in CC 1:4:6 (cement, sand and 40 mm. brick ballast) Grouting will be done in the block of size 45cm x 45cm x 1/6th of full length of the support upto ground level as per RESPO Norms.
Grouting of stay rods (20x1800mm.) including all works of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:6 (cement, sand and 40 mm. brick ballast) including back filling of soil and proper ramming etc.
Fixing, tightening and nozelling of stay wire with stay rod and stay insulators with the pole of required tension by providing stay clamps, nuts, bolts etc.
Earthing of support with MS Earth Rod of (20x2500)mm. long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5M below the ground level and connecting below the earth electrodes with the help of G.I. Wire No.6 SWG tightening with nuts and bolts.
Laying 11 KV ACSR Dog Conductor, sagging, stringing and binding with all other accessories on pole as per RESPO Norms.
Providing and fixing of Danger Board with clamp, nut and bolts.
Providing and fixing of Number Plate with clamp, nut and bolts.
Providing red oxide paint (15 Ltr.) & Paint after rubbing with sand paper to the surface of the structure includidng labour and T&P complete in all respect.
Making of All Connection and Energization of Connection
Carriage of following from work site to Store Centre including loading and unloading at both ends :-
Uprooted all line materials & Poles etc. stacking at a safe place, including loading and unloading at both ends.
S A TRADERS (BID ID -4760346)
M/s Charley Enterprises (BID ID -4767217)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .