Creation of Office Chambers with Glass partitions in NHPC Office Complex, Sec-33, Faridabad

Amount

PART A: CIVIL WORKS

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Providing and fixing 12 mm thick frameless toughened glass partitition of approved brand and manufacture of required size including fixing arrangement and making necessary holes etc. as per direction of Engineer-in-charge (Connectors and Over panel Patch etc.to be paid separately).

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing Over Panel Connecting Patch with Pivot for glass door (OZONE OPF-1S STD SSS or equivalent as per requirment)

Providing and fixing Top Panel Patch for glass door (OZONE OPF-2S STD SSS)

Providing and fixing Bottom Panel Patch for glass door (OZONE OPF-3S STD SSS)

Providing and fixing Glass-to-Glass or Glass-to-wall Connector 90˚° as per requirment for glass partition walls (OZONE OGC-3+ STD SSS or OGC-4+ STD SSS)

Providing and fixing Central Patch Lock (Ozone OPL-2A STD SS) with Strike Box (OZONE OPL-2B STD SS) in glass doors

Providing and fixing D type SS hadle in SSS finish of size 25X450mm (OZONE OGH-11)

Providing and Fixing frosted glass film as per colour and quality approved by Engineer-in-Charge

PART B: ELECTRICAL & HVAC WORKS

Supplying and fixing following Hydrualic pop up / cable cubby desktop board having following on the existing table including cutting the table, electrical / HDMI/telephone connections etc as per instruction of Engineer Incharge as required for making it functional.

Hydraulic popup / cable cubby desktop board with 2 power socket, 2 LAN socket, 1 HDMI, and audio port, USB 3.5mm, RJ 45 port

Hydraulic popup / cable cubby desktop board with 2 universal power socket, 1 switch, 1 USB 3.5mm modular

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required

3 x 2.5 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following size corner duct cable raceway on the existing floor /table side/corner including connections but excluding modular plate etc. as required.

Minimum 4.32 x 1.52 cm

Supply Installation, testing and commissioning of pre-wired recess ceiling mount round / square 18W LED panel light, constant current integrated driver, Light Color 6000K,lumen input voltage 220-240Volt,CRI >80,high efficiency ,IEC complaint for safety and performance etc as required.

Supply Installation, testing and commissioning of pre-wired surface mounting smart automation energy saving lighting control LED 2X2 40 Watt with HF frequency motion sensing with the true presence technology, with motion detection range upto 7mtr 360 detection angle smart , IP20, having dim wattage upto +-7 Watt, constant current integrated driver, Light Color 6000K, linput voltage 190-270 Volt AC,CRI >80, high efficiency, IEC complaint for safety, performance etc as required

Supply Installation Balancing and commissioning of fabricated at site GSS sheet metal rectangular / round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hengers, supports etc., as per approved drawing and specifications of following sheets thickness complete as required

Thickness 0.80 mm sheet

Supply fixing testing and commissioning of supply air diffusers of power coated aluminium with aluminium volume control dampers with anti sumdge rings and removable core

Supply fixing testing and commissioning of return air diffusers of power coated aluminium without aluminium volume control dampers but with anti sumdge rings and removable core

R. V ENTERPRISES (BID ID -3241773)

CONSTRUCTOCITY INFRASTRUCTURE PRIVATE LIMITED (BID ID -3239122)

SWAGATAMA ENTERPRISES (BID ID -3242435)

TLCS INDIA PRIVATE LIMITED (BID ID -3233958)

SHREE JEE INNOVATIVE CONSTRUCTION (BID ID -3237608)