Construction of Cement Comcrete Road Under Maharashtra Suvarn Jayanti Nagarotthan Mahabhiyan Scheme in Municipal Corporation Amravati Area Dist - Amravati (Part B)

Amount

Amravati part B schedule B as per new GR

Dewatering on BHP basis by using water pump including diversion of stream providing cofferdams, earthern bunds etc as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 Metres, stacking servicesable and unserviceable material separetely etc. Complete.

Removing lime or lean cement concrete including stacking the spoils as irected with all leads, lifts etc, complete.

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Removal of telephone / Electric poles including excavation and dismantling of foundation concrete and lines

Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to

Conveying the excavated material of various sorts including loading,unloading and disposing as directed. For 2km

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with

Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/quartzite

Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work

Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc.

Providing and laying in situ / ready mix M-20 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete . (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications ( VSI sand finely washed etc)

Stamp Concrete of 100mm Thickness- Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100 mm thickness pavement over aprepared subbase with43 grade cement coarse and fine aggregate (natural sand/ VSI grade finely washed crusheds Confirming to IS383,as per mixed in a batching and mixing plant /nontilting mixer and weigh batcher as per approved mix design,admixtures,transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avastinagar to wadi) spreading,laying with approved makepover,compacted and finished in a continous operation,finishing to lines and grades Also Providing,Placing and applying

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. Rd 24/page no.203

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

Compacting the hard murum side widths Including laying in layers on each side with vibratory roller including artificial watering etc. complete.

Compacting the hard murum/kankar for all widths to 200 mm loose with static roller including artificial watering etc. complete.

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - I Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam

Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand)

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss

Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mm.to 4 mm. joint)

Providing and casting in situ or precast tapering R.C.C. M-20 Semi Barrier type Kerb without gutter ( as per

Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements

Providing RCC railing of cast in situ / ready mix RCC posts with M20 CC of trap/ granite/ quartzite/ gneiss metal size 150x150x1.240 m and horizontal 3 no.s at distance of 370 mm c/c and bottom bar 150 mm above kerb as per the detailed drawings (including surface only. Newly laid concrete shall be covered by gunny bag, plastic,tarpaulin etc.(Wooden centering/formwork will not be allowed).

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to2.7 mm confirming to I.S . 13592- 1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C fittings and additional 2 piece socket. clips shall be got approved from engineer in charge etc. complete.

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC

Providing and laying in trenches 15 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenchesetc. complete Including removing existing pipe line if necessary and conveying and stacking the same in

Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete.

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. Including cutting, bending, hooking the bars, binding with wires or tack

Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms. long and at 30.00 cm. C/C and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etc. complete

Providing and fixing in position TMT FE 500, 32mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half-length with bituminous paint as directed etc. complete.

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry,

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation

Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/

Providing and Laying of Rumble strips with Plastirib2K, or equivalent 2 component cold plastic profiled material to give total width of 500mm and height of 10mm.Ramp provided to give width of 145mm,width of ribs to be 55mm laid at centre to centre distance of 35mm, with reflective glass beads @350gm/Square Metre. The finished surface to be levelled, uniform and free from streaks and holes, to be applied on the edge lines , including surface cleaning and cost of all materials etc. complete.

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 /13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc complete.

i)For 125 MM

ii)For 200 MM

iii)For 315 MM

Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression

i)For 125 MM

ii)For 200 MM

iii)For 315 MM

Providing and laying in situ / ready mix M20 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant/ pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc )

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats includings caffolding, preparing the surface.(excluding primercoat) etc. complete.

Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 1200mm made out of2mm aluminum sheet bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic

Planting large flowering trees and large foliage trees as per specification in garden ssr 2022-23

i)large flowering trees(bahava)

ii)large foliage trees(Kadu Neem)

Providing Heavy Duty Fibre Glass Reinforced Plastic Temporary Barricade of 1.75 m hight, with base width of 430 mm as a provision to accept water ballasting of 101 Itrs-110 Ltrs approx. and arrangement for traffic diversion such as traffic signals during construction at site, for day and night as per requirement. The raw material shall be UV stabilized Linear Low Density Polyethylene and should meet the requirements stipulated in standard IS: 10146-1982, IS:10141-1982 and should also comply to FDA:CFR Title 21.177.1520. Olefin Polymers , with specific FRP Grade 300-104 reinforced during moulding process to the permissible extent for improved impact strength. Qualification Criteria: For qualifying the sample , few tests shall be performed at Government Lab OR NABL Accredited Lab on Site Safety Fence sample, failure or deviations in test results of sample shall be disqualified.The tests and qualifying results are as under, (a) tensile strength at yield by ASTM D 638 =20.93 mPA, (b) Elongation at break ASTM D 638 = 121.66 mPA (c) Flexural Modulus ASTM D 790 = 633.76 mPA (d) Izod Impact Strenth (Notched) ASTM D256 = 4.41 Kg / Sqm (e) Izod Impact Strenth (Un-Notched) ASTM D 256 = 67.04 Kg / Sqm (f) Drop Impact strength 25 Kg Load from 1 m, 2 m & 5m height the weight of empty single Rotomoulded Plastic Barricade without to fix two brackets at both end in corner for anchoring purpose .each rear bracket is constructed through rod of Dia.60 mm with curvature welded with MS strip of 3 mm thick ,50 mm width and 90 mm length at its top …….etc.

Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 square meter made out of ____mm aluminum sheet bonded with white retro reflective sheeting of Class __ ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle drawing The

SRK INFRA

S S BUILDCON