Resurfacing of 75mtr wide road (road no17) RHS.LHS (ch.0.00to 1.00) b/w sector 32 and 33 yea WC-03

Providing and applying tack coat on the prepared surface with bitumen VG-10 in boiler and spraying the bitumen with sprayset fitted on bitumen boiler including cleaning,preparing the existing road surface as per specifications. (MORTH-502/AR/YEIDA/Based on UPPWD/SOR-2020

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading ,grading to required slope and compacting to meet requirement of table 300-2 up to 20 k.m . Morth-305

Providing and laying dense graded bitumen macadam with 100-120 TPH batch type HMP producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder 60/70 @4.25% of mix and filler transporing the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level, and alignment rolling with smooth, wheeled, vibratory and tandem rollers to achieve to desired compaction as per MORH & H specification clause 507 complete in all respects. 50 mm compacted thickness with bitumen penetration of 60/70 @4.25% by weight of total mix.(MOST/507) (A.R./YEIDA)

Providing and laying Bituminous concrete with 100-120 tph batch type hot mix plant producing an average output of 75 tonne per hour using crushed agg. Of specified grading, primixed with bituminous binder @ 5.4 to 5.6 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with senser control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tendem rollers to achieve the desired compaction as per MORT&H specification clause 509 complete in all respects.40 mm compacted thickness with bitumen of grade CRMB 55

Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in- charge and accordance with applicable specifications. SOR-20/16.62/P-269

Add Royalty Providing and laying dense graded bitumen macadam with 100-120 TPH batch type HMP producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder 60/70 @4.25% of mix and filler transporing the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level, and alignment rolling with smooth, wheeled, vibratory and tandem rollers to achieve to desired compaction as per MORH & H specification clause 507 complete in all respects. 50 mm compacted thickness with bitumen penetration of 60/70 @4.25% by weight of total mix.(MOST/507) (A.R./YEIDA)

Add Royalty Providing and laying Bituminous concrete with 100-120 tph batch type hot mix plant producing an average output of 75 tonne per hour using crushed agg. Of specified grading, primixed with bituminous binder @ 5.4 to 5.6 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with senser control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tendem rollers to achieve the desired compaction as per MORT&H specification clause 509 complete in all respects.40 mm compacted thickness with bitumen of grade CRMB 55

Add Maintenance @ 5.00 %.