Construction of One no. Additional Classroom at Champeswar Govt. Upper Primary School, Sathilo, Balianta

GROUND FLOOR Earth work in hard Soil in foundation including intial lead and 1.5 m. intial lift including rough dressing etcincluding cost, conveyance, royalty taxes of all metarials, etc completed as per the direction of the Engineer-in-charge.

Sand filling in foundation and plinth with approved river sand well watered and rammed.including cost, conveyance, royalty taxes of all metarials, etc completed as per the direction of the Engineer-in-charge.

Plain Cement Concrete (1:3:6) using 40 mm size H.G. metal ( crusser brocken ) well rammed including cost, conveyance, royalty taxes of all metarials, etc completed as per the direction of the Engineer-in-charge.

Flyash (10") brick work in cement mortar (1:6) using Flyash. bricks of approved quality including cost, conveyance & royalty of all metarials etc complete as per direction of the Engineer-in-charge. (F & P)

Superstructure

Rigid smooth centring for RCC works including false work and dismantling then after casting including floor. ( F&P)

Superstructure (Column & beam)

Landing

Waistslab

R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying.

Supplying, fitting and placing uncoated HYSD bar rainforcement complete as per Drawing and technical specifecation.

MS panneled Door Double leaved shutter with MS frame Over all size including frame:- 1980mm(H)x1070mm(W) made out of the following materials conforming to relevant indian standard specification. frame 35x35x6 MS angle shutter style:- Top and bottom rail 25x25x3mm MS angle. Door pannel:- 1.0mm CR sheet. Pannel stiffner covering width of each leaf:- 19x5mm MS flat 3nos. on each leaf .Hinges size 100mm 6nos(3nos on each side) bought out as per ISS Hold fast :- 35x35x6mm MS angle 175mm length bifurcated at the tip 3nos. on each side . Handle:- 19x5mm MS flat fabricated 4nos. aldrop 2nos. bought out as per ISS. Tower bolt:- 2nos bought out as per ISS.

MS window grill made out of MS flat conforming to IS-2062/2006

Labour for fitting and fixing MS door,window gate,grill as per approver design including cost of materials complete.

6 mm thick plaster with cement mortar (1:4) for plaster over R C C surfaces including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

12 mm thick plaster with cement mortar (1:6) over brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

16 mm thick plaster with cement mortar (1:6) over stone/brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

Fixing Vitrified industrial tiles in floors treads or steps & landing on 25 mm thick bed of cement mortar( 1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete.

Supplying,fitting & fixing vitrified tile in floors of size (600x600)mm of approved make conforming to IS:13755 laid on 20 mmthick cement mortar(1:4) & filling joints with white cement of approved quality including cost of all materials,labour T & P etc required for the work all complete as per direction of Engineer-in-charge(For new work only)

Plain Cement Concrete (1:4:8) using 40 mm size H.G. metal ( crusser brocken ) well rammed including cost, conveyance, royalty taxes of all metarials, etc completed as per the direction of the Engineer-in-charge.

Fixing tiles in floors treads or steps & landing on 25 mm thick bed of cement mortar( 1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete.

Fixing tiles in dados,skirting & risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete .

Painting with synthetic paint of approved quality and shad over surface with 2 coats over 1 coat of primer etc.

Priming One Coat with approved Primer On New Surface.(GF)

Painting 2 coats to walls with weather coat of approved shade including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

Painting 2 coats to walls with Plastic emultion paint of approved shade including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

Supplying,fitting,fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.9m c/c and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in railing as per approved design.

FIRST FLOOR Flyash (10") brick work in cement mortar (1:6) using Flyash. bricks of approved quality including cost, conveyance & royalty of all metarials etc complete as per direction of the Engineer-in-charge.

Rigid smooth centring for RCC works including false work and dismantling then after casting including floor. Column

Lintel band

Chajja,slab etc.

R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying.

Supplying, fitting and placing uncoated HYSD bar rainforcement complete as per Drawing and technical specifecation.

MS panneled Door Double leaved shutter with MS frame Over all size including frame:- 1980mm(H)x1070mm(W) made out of the following materials conforming to relevant indian standard specification. frame 35x35x6 MS angle shutter style:- Top and bottom rail 25x25x3mm MS angle. Door pannel:- 1.0mm CR sheet. Pannel stiffner covering width of each leaf:- 19x5mm MS flat 3nos. on each leaf .Hinges size 100mm 6nos(3nos on each side) bought out as per ISS Hold fast :- 35x35x6mm MS angle 175mm length bifurcated at the tip 3nos. on each side . Handle:- 19x5mm MS flat fabricated 4nos. aldrop 2nos. bought out as per ISS. Tower bolt:- 2nos bought out as per ISS.

MS panneled window double leaved shutter with MS frame and grill Over all size including frame:- 1220mm(H)x910mm(W) made out of the following materials conforming to relevant indian standard specification. frame 35x35x6 MS angle shutter style:- Top and bottom rail 25x25x3mm MS angle. window pannel:- 1.0mm CR sheet. Pannel stiffner covering width of each leaf:- 19x5mm MS flat 2nos. on each leaf .Hinges size 100mm 4nos(2nos on each side) bought out as per ISS Hold fast :- 35x35x6mm MS angle 100mm length bifurcated at the tip 2nos. on each side . Handle:- 19x5mm MS flat fabricated 2nos. (inside). Tower bolt:-42nos bought out as per ISS.Horozontal grill:- 12mm MS round at 100mm spacing.

MS window grill made out of MS flat conforming to IS-2062/2006

Labour for fitting and fixing MS door,window gate,grill as per approver design including cost of materials complete.

6 mm thick plaster with cement mortar (1:4) for plaster over R C C surfaces including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

12 mm thick plaster with cement mortar (1:6) over brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

16 mm thick plaster with cement mortar (1:6) over stone/brick masonary including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

Supplying,fitting & fixing vitrified tile in floors of size (600x600)mm of approved make conforming to IS:13755 laid on 20 mmthick cement mortar(1:4) & filling joints with white cement of approved quality including cost of all materials,labour T & P etc required for the work all complete as per direction of Engineer-in-charge(For new work only) (Coloured / Printed)

Painting with synthetic paint of approved quality and shad over surface with 2 coats over 1 coat of primer etc.

Finishing surface of wall with cement based wall putty(water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc. complete.

Priming One Coat with approved Primer On New Surface.external

Internal

Painting 2 coats to walls with weather coat of approved shade including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.External

Internal

Painting 2 coats to walls with Plastic emultion paint of approved shade including all cost, conveyance & royalty etc complete as per direction of the Engineer-in-charge.

Please Enable Macros to View BoQ information