ARRANGING POWER SUPPLY TO AN EXTENT OF 100KW TO LANDFILL SITE AT CHOLAMARANAHALLI VILLAGE SY NO 90 AND KANNAMANGALA SY NO 148 OF CHANNAPATNA CMC

ARRANGING POWER SUPPLY TO AN EXTENT OF 100KW TO LANDFILL SITE AT CHOLAMARANAHALLI VILLAGE SY NO 90 AND KANNAMANGALA SY NO 148 OF CHANNAPATNA CMC

DP Structure using PSCC pole 9mtr long 300 kg WL and labour charges.

PSCC pole 9 mtr long 200kg WL and labour charges.

Rabbit Conductor with 1.5% sag and labour charges.

11KV Horiontl X Arm with clamps, HTST supports, bolts, nuts and washers and labour charges.

LT 4 pin Cross arm with clamps, HTST supports, bolts, nuts and washers and labour charges.

11kv, 5KN, Polymeric pin Insulator

11KV , 45KN polymeric Insulator

1.1KV Polymeric Pin Insulator

Guy set complete with No.15 strain insulator and labour charges.

Spiral earth electrode and labour charges.

Guy concreting with boulders, mud and sand

Caution / Danger board

Anticlimbing device and labour charges

11KV, 200 amps single break GOS and Labour charges

H- Frame for mounting GOS and Labour charges

DOLO cut out and labour charges.

11KV, 3x240 Sqmm XLPE UG Cable (Double Run)

Cable termination kit indoor HS type suitable for 240 Sqmm cable

Cable termination kit outdoor HS type suitable for 240 Sqmm cable

Cable covering tiles 250x125x40 mm or 125x125xx40 mm

Artificial/manufacture Sand

Route and joint indicating stones

Cable trench excavation 70x0.6x1 42 ordinary soil

Laying of cable in trench

Refilling and consolidation

Making of cable termination

Laying of Route and joint indicating stone

Earthing materials pipe type for grounding (single electrode with accessories) and labour charges

11KV /433V, 250KVA, 3Phase, 50 Cys Distribution Transformer BEE-4 star rated with oil (Cable entry type) and labour charges.

Construction of platform with size stone, cememnt concrete for erection of 500 KVA transformer /heavy equipment. Construction of platform (1.5x1.5x1.2) mtr in size stone, for erection of transformers/...

Fixing foundation frame of channels and angle iron welding fixing in concrete aligning.

Earthing material for DTC center and Labour charges

1.1 kv, 3x95 Sqmm XLPE LTUG Cable (Double Run)

Cable termination kit indoor HS type suitable for 95 Sqmm cable

LT Metering cubicle at low tension for 50 KW to 150 KW having specification and design as per the prototype approval and Labour charges.

LT 3 Phase, 4 wire, CT operated DLMS complaint ETV meter-5A, class 0.5s accuracy

LT 3 phase,4 wire 5-30 Amps thread through type composite meter housing box consisting of ETV meter with AMR comply and LTCT with buit in GSM GPRS modern upto 100 KVA distribution transformer.

LT Distribution box for 250 KVA with MCCB

Fabricating supplying and mounting MS box made out… SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped w...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Supplying.........A rated 3 phase with neutral busbar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/FRP/DMC insulator which...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts,nuts,necessary phase separators,handle and wiring complete.Protection of Overlo...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts,nuts,necessary phase separators,handle and wiring complete.Protection of Overlo...

Supplying,fixing and wiring 0 to30 A Direct Reading AC analog type Ammeter.(P.No.18, I.No.5.24 in CSR Electrical SR Volume-6 2023-24)

Supplying,fixing and wiring 0 to 600 V 96x96mm AC Voltmeter on existing panel/wood board.(P.No.18, I.No.5.22 in CSR Electrical SR Volume-6 2023-24)

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 100Amps (P No. 14 I No. 5.7.4)