SPECIAL REPAIR TO BLDG NO. P/8/440 AT VD WKSP UNDER GE PANAGARH

Amount

B/R PORTION

S&F Anodised aluminium snap grid (605X605mm ) frame work for false ceiling including dismantling, complete all as specified and as directed.

M&L for hanger 6mm dia G.I (upto 1200 mm length) adjusted level fixed to roof slabs by means of ceilling cleat made out of GI flat 40x3 mm size 60mm long and expansion hold fastener 12.5 mm dia 40 mm long including dismantling , complete all as specified and as directed.

S&F 4mm thick 'E' board (non asbestos fibre) plain building boards fixed in aluminum frame work in ceiling flat or sloping with screws including dismantling of wall or ceiling boards , complete all as specified and as directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured (Dark Colour) and including 15mm thick screed bed in cement mortar 1:6 including dismantling of floor hearth or wall tiling incl cement martar bedding , complete all as specified and as directed.

M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished even and fair for receving floor finish , complete all as specified and as directed.

Material and labour for non skid ceramic tiles coloured 7 to 8 mm thick(square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors etc, set and jointed with neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over and including 15mm thick screed in cement mortar (1:6) including dismantling of floor hearth or wall tiling incl cement martar bedding , complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm/450x350x7mm thick quality not less than group II, straight edge, k, as on skirting , dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4, including dismantling wall tiling and cement mortar bedding , complete all as specified and as directed.

M&L for fly ash brick straight or curved on plan exc 6 m mean radius built in CM 1:6 ,including demolition of brick work built in cement mortar including all quoins, arches, pillar , complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm agg.) in plinth protection and paving finished even and smooth with out using extra cement , complete all as specified and as directed.

M&L for PCC 1:3:6 type C1 using 20mm garded stone aggregate as in surface channel , complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc , complete all as specified and as directed.

M&L for Rendering 15mm thick in on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:4), including taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water , complete all as specified and as directed.

Supply only water proofing compound , complete all as specified and as directed.

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6),including taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water , complete all as specified and as directed.

M&L for Rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/chajja/pillar in cement mortar (1:3),including taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water , complete all as specified and as directed.

M&L for Two coats of Oil bound destemper on newely wall surface including chalk whiting, preparation to distempering including complete removal ot existing surfaces , complete all as specified and as directed.

M&L for Three coats of white washing on new ceiling/chajja surfaces including preparation of , complete all as specified and as directed.

M&L for Two coats of white washing on old ceiling surfaces including preparation of celing surfaces , complete all as specified and as directed.

Material and labour for preparation of new plastered or un-plastered surfaces of walls applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance exterior paint of required shade (Company depot tinted) with silicon additives@ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces , complete all as specified and as directed.

M&L for Two coats of distemper oil emulsion (OBD) incl preparation on old wall surfaces of any description , complete all as specified and as directed.

M&L for applying wall care putty on wall surfaces , complete all as specified and as directed.

Material and labour for complete removal of old existing surfaces treatment of wall & applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004 , alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives@ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces.the old painted surface shall be removed compleltly by mechanical scrubbers with sand paper and maunually where the mechane canot reach, washing the surface with water and preparing surface if necessary with exterior wall putty to a uniform smooth surface of walls , complete all as specified and as directed.

Material and labour for treatment of wall & applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004 , alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives@ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new plastered surfaces , complete all as specified and as directed.

M&L for Two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces , complete all as specified and as directed.

M&L for Two coats of synthetic enamel paint over & including a coat of pink primer over new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces , complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) not exceeding 15 cm thickness of any description and in any position not otherwise specifically provided for , complete all as specified and as directed.

M&L for Hardcore of gauge n exc. 63mm, (broken stone/boulders)deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface , complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8, type D2 using graded stone aggregate , finished even and rough to receive top surfaces , complete all as specified and as directed.

M&L for Chequered Cement concrete tiles 20cm x 20cm x 25mm thick, set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in cement mortar 1:4, with grey cement and pigment , complete all as specified and as directed.

S&F Aluminium wire mesh 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminiun beads, complete all as specified and as directed by EIC.

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane , complete all as specified and as directed.

S&F Figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane , complete all as specified and as directed.

S&F Framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O , complete all as specified and as directed.

M&L for Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories , complete all as specified and as directed. Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) (A) Area not exceeding 2.00 sqm each

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality as per approved drawing , complete all as specified and as directed. (Glass shall be paid separately). Note : For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Taking down chowkhats or frame not exceeding 1.5 Sqm each with shutter(s) (without taking off shutters from the frame) , complete all as specified and as directed.

Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutter(s) (without taking off shutters from the frame) , complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter, 28 to 30mm thick (styles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifiecation & drawing , complete all as specified and as directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening , complete all as specified and as directed.

S&F Factory made, 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated , complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood, glazed & skeleton shutters, open rebated & prepared to receive glass, (two panel to receive wire gauge) gauge etc, eges of framing plain, chamfered as rounded fitted with cut and mitere beads for securing etc , complete all as specified and as directed.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint , complete all as specified and as directed.

M&L for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1 as required. Exc half brick but n.exc one brick , complete all as specified and as directed.

S&F hold fasts for inserted brick wall , complete all as specified and as directed.

S&F Anodised aluminium door shutters, , aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprane packing, handles 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc , complete all as specified and as directed.

S&F Anodised aluminium frame for doors, windows ventilators with one or more rebates including deco grill and joining cleat for fixing etc , complete all as specified and as directed.

S&F in repair's Aluminium Curtain Rods 25mm dia Decorative type with a pair of brackets, approved pattern and colour , complete all as specified and as directed.

S&F in repair's Double leg aluminium anodised door stopper with rubber foot , ISI marked and fixed with standard aluminium screws , complete all as specified and as directed.

S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.

S&F 150 mm long alluminium anodised handles , complete all as specified and as directed.

S&F Butt hinges, stainless steel medium weight, fixed with ss screws or with welding to existing MS frames, 100 mm size, ISI marked , complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed , complete all as specified and as directed.

M&L for 50mm thick PCC 1:2:4 type B-1 (using 20m graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement, including demoliton of cement concrete (un-reinforced) roof surfaces, complete all as specified and as directed.

Material and labour for rendering 10 mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar 1:4 using water proofing compound , complete all as specified and as directed. Note : WPC shall be measured and paid seperately.

M&L for preparation new surfaces or roof and applytwo coats of polyurethene (PU) acrylic based water proofing liquid compound over & including one coat of self priming @ one litre oer ten sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage/ seepage from roof/ wall, complete all as specified and as directed by the Engineer-in-Charge. Note : (i) As per description of these item minimum two coats of Polyurethene (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by as per manufacturer instruction. Please note no price asjustment shall be made, if as per manufacturer instructions more coats of polyurethene ) PU acrylic based water proofing liquid compound & primer are required for roof treatment. (ii) Quoted rate shall be deemed to be included for work in buiding/ structure of any height.

Rounding of / moulding to edge (half round) of granite stone of any description including rubbing and polishing , complete all as specified and as directed.

M&L for Machine cut Kota stone flooring 18-20 mm thick, laid over & including screed bed of 20 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) , complete all as specified and as directed.

M&L for Kota stone slab 18-20mm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick (average thickness) cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite finish) , complete all as specified and as directed.

M&L for 100mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor finshed even and fair , complete all as specified and as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips , complete all as specified and as directed.

Supply and fix in repair's vitreous china wash down water closet (pedastal type)and trap white including seat coverand jet, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe,etc, complete all as specified and as directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) , complete all as specified and as directed.

S&F in repair's 10 ltr capacity PVC flushing cistern syphonic action type white dual flush ISI (IS 7231) marked with flush pipe with all fixing arrangements , complete all as specified and as directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 10mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , complete all as specified and as directed.

S&F Wash ahnd basin oval shape Counter type of size 450mm including necessary fittings such as waste coupling, brackets, down take pipe and schromimum plated wan neck pillar cock , complete all as specifies and as directed.

S&F in repair's Vitreous China wash hand basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts and waste pipe, complete all as specified and as directed.

S&F in repair's PVC connections 15 mm size with PTMT nuts of length 450 mm , complete all as specified and as directed.

M&L for 100 mm cast iron sanitary connection socket to fit WC out-let , complete all as specified and as directed.

S&F in repair's Hat and coat hooks, solid body Aluminium 175mm to 250 mm fixed to wall with screw and rawl plugs, fixed, complete all as specified and as directed.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc, and making good, cutting not exceeding 10 cm girth, in brick walls , complete all as specified and as directed.

S&F GI Tube 15 mm bore, ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, including taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store , complete all as specified and as directed.

Refixing of 15mm dia GI tubing medium grade with all fittings to walls, ceiling or laid under floors and connections, Complete all as specified and as directed. Note : GI Tube 15 mm bore shall be use obtained from Item No 1.71 here-in-before.

S&F cast copper alloy, chromium plated pillar cock, suitable for 15 mm bore pipe, fancy type , complete all as specified and as directed.

S&F Consealed stop valve, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe , complete all as specified and as directed.

S&F in repair's CP Stop valve, any description, suitable for 15mm bore pipe , complete all as specified and as directed.

S&F Bib taps, cast copper alloy with handle, chromium plated fancy type, fancy type with wall flange screwed down, suitable for 15 mm bore pipe , complete all as specified and as directed.

S&F CP Swivel shower arm 15mm size,195 mm long with bend of 45 degree with flange of fixing with 15mm pipe (Minimum weight 40 gm) , complete all as specified and as directed.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) , complete all as specified and as directed.

S&F Waste coupling of PTMT, for WHB any colour half or full threaded suitable for 32 mm size discharge pipe (Minimum weight 45 gm) , complete all as specified and as directed.

S&F in repair's Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes, complete all as specified and as directed.

S&F in repair's Vitreous china bowl urinal flat back type, white and including all fixing accessories like waste coupling and waste pipe etc, complete all as specified and as directed.

Dismantling of cast iron pipes with all fittings and fixing acessories, jointed in cement mortar 75/100 mm bore at any location, complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls , complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors , complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls , complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors, complete all as specified and as directed.

S&F 110 dia PVC (SWR) bends any radius fitted with oval access door , complete all as specified and as directed.

S&F 75 dia PVC (SWR) bends any radius fitted with oval access door , complete all as specified and as directed.

S&F 110 dia PVC (SWR) plain bends bends any radius , complete all as specified and as directed.

S&F 110 dia PVC (SWR) plain bends bends any radius, complete all as specified and as directed.

S&F 75 dia PVC (SWR) plain bends bends any radius , complete all as specified and as directed.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement , complete all as specified and as directed.

M&L for making holes in to slab/beam surface with drilling mechanie 20-25mm dia bit to a depth 30 - 50mm and fixing the PVC flexible pipe/nozzle in to the hole, concelaed the drilled surface with cement and Grouting the cenment slurry with pressure pump till rejection and sealed the hole surface with single component, polymer modified, cementitious mortar , complete all as specified and as directed.

S&F Grating 100 mm dia with or without hole of PTMT (Minimum weight 25 gm) and fitting of shade matching to tiles/floor, fixed with white cement including matching shade pigment, complete all as specified and as directed.

E/M PORTION

Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc. to match with the existing, complete all as specified as directed.

Material and labour for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc, complete all as specified and as directed.

All as per item No.2.02 here-in-before but One 3 pin 5 Amps socket outlet points on independent board, complete all as specified and as directed.

All as per item No.2.02 here-in-before but 5 Amp socket on same board with other switches, complete all as specified and as directed.

Material and labour for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including Modular pressed steel terminal switch boxes of diffrent module and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR cable earth wire and connecting to earth dolly and brass screws, washers etc, complete all as specified and as directed.

Supply and fix switch piano flush type, single pole , 6 Amps, one way , complete all as specified and as directed.

Supply and fixed switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch , complete all as specified and as directed.

S&F socket outlets 2 in 1, 5/6 Amps flush type230/240 V, complete all as specified and as directed. (For Same Board only)

Supply and fixed switch socket combination 2 in 1 , 6 pin , (16 Amps ) flush type controlled by one switch complete all as specified.

Supply & fixed stepped type electronic fan regulator flush type 240 Volts ISI marked , complete all as specified and as directed.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps , complete all as specified and as directed.

Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings , complete all as specified and as directed.

Supply and fix submain wiring two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire , complete all as specified and as directed.

Supply and fixed security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size , complete all as specified and as directed.

Supply and fixed in repair's 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection, complete all as specified and as directed.

Supply and fixed Vertical distribution board double door TPN 4 way with IP 43 multiphase outgoing suitable for mounting 125 Amps as incomer with Bus bars, Neutral links with all accessories , complete all as specified and as directed.

Supply and fixed in repair's epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact , complete all as specified and as directed.

Supply and fix MCCB of 4 pole , 415volts of capacity 100 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessry connection , complete all as specified and as directed.

Supply and fixed in repair's MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection, complete all as specified and as directed.

Supply and fixed in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and as directed and testing on completion.

Supply & fix metallic Exhaust ventilation fan of sweep 450 mm sweep, 230volt AC complete with louver and all asssesories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing connected with twin core twisted flexible copper conductor (23/0.0076) of size , complete all as specified and as directed.

Taking down of AC ceiling fan of any sweep & any height and opening the fan and oiling, greasing and replacement of unserviceable accessories and servicing, complete overhauling and re-assembling and testing complete for efficient functioning and hanging it back in position including provn of 0.5 Sqmm copper flexible twin twisted cable (length not exceeding 0.5 metre) from ceiling rose to fan , complete all as specified and as directed. Note : Accessories such as gun metal bush and split pin and jam nut shall be measured and paid under releavent item here-in-after.

M&L for painting of ceiling fans upto 1400mm sweep carefully, dismantling fan blades and paint with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc , complete all as specified and as directed.

S&F 2000 ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top with three layered) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting including taking down old unserviceable tank , complete all as specified and as directed.

Supply and fixing of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25 mm dia with fly nut complete including taking down old unserviceable float valve , complete all as specified and as directed.

M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete including taking down old unserviceable gate valve , complete all as specified and as directed.

Supply & fix in repair's 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc, complete all as specified and as directed.

Supply & fix in repair's 50 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc , complete all as specified and as directed.

Supply, laying / fixing / connecting, testing and commissioning of LT under ground cable 95 Sqmm x 3.5 core XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) , complete all as specified and as directed. Note : (i) Excavation,sand cushioning,brick will be measured and paid separtely.

Supply, laying / fixing / connecting, testing and commissioning of LT under ground cable 50 Sqmm x 3.5 core XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) , complete all as specified and as directed. Note : (i) Excavation,sand cushioning,brick will be measured and paid separtely.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil , complete all as specified and as directed.

Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil , complete all as specified and as directed.

Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and as directed.

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling , complete all as specified and as directed. Note : Punned thickness 18 cm shall only be considered for payment.

Supply and lay in trenches fly ash bricks, for cable protection , complete all as specified and as directed.

Supply and fix Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement , complete all as specified and as directed.

Supply , install, testing and commissioning of floor mounted LT outdoor panel board AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick with CPRI Approved CRCA steel sheet of suitable size with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides , structure treated under - tank metal treatment process and duly powder coated , complete all as specified and as directed. BUSBAR : (i) Copper bus bar 300 Amps , supported on non hygroscopic fibres and brass screws for mounting - 04 Nos INCOMER : (a) Supply and fix MCCB 4 pole 415 Volts of breaking capacity of 25 KA of 200 Amps with Fixed thermal and Fixed magnetic setting - 01 Nos INDICATING DEVICES : (a) Supply and fixLED Indicating lamps for Main Supply indicating R, Y, B - 03 Nos (b) Supply and fix Digital Ampere Meter 31/2 digit display , incl CT having CTR 200/5 - 01 Nos & Digital Voltmeter 0-500 Volts , SIF 96 - 01 Nos OUTGOING FEEDERS : (a) Supply and fix MCCB of 4 pole , 415volts of capacity 100 amps with breaking capacity of 25 KA Fixed thermal and fixed magnetic setting - 04 No (b) Supply and fix 40 Amps MCB TPN, 415volts - 02 No

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600 mm x 600 mm x 6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 32 x 6 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS TMT bars 8mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note : If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

SCHEDULE OF CREDIT

UNIQUE ENTERPRISE

HIGH HILLS INFRA

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

M/S SEHGAL CONSTRUCTION