Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.5 LAccepted-AOC N A | NA | NA | 121004 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹28.5 L+₹60,663.48 (2.17%)Rejected-Finance 08 PINK ENCLAVE MAHESH NAGAR BALAJI VIHAR GOPALPURA JAIPUR RAJASTHAN 302015 INDIA | JAIPUR | RAJASTHAN | 302015 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹32.8 L+₹4.9 L (17.6%)Rejected-Finance N A | NA | NA | 121004 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹34.0 L+₹6.1 L (21.8%)Rejected-Finance 35 MODEL TOWN G T ROAD JANDIALA GURU DISTRICT AMRITSAR | JANDIALA GURU | AMRITSAR | PUNJAB | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹34.6 L+₹6.7 L (23.9%)Rejected-Finance PLOT NO 17 GF PRATAP NAGAR NEW DELHI 110064 | WEST | DELHI | 110064 | L5 | Rejected-Finance Being other than lowest |
| Sl No | Description | Qty | Unit | M/s Durga Traders L5 | Vipul Construction L3 | MAA SANTOSHI ENTERPRISES L1 | M/s Shubh Enterprises L6 | M/S SIMRAN CONSTRUCTION CO L2 | STAR CONSTRUCTION CO L4 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of cement concrete unreinforced in Ground floor & paving not exc 15cm thickness and removal of debris from site all as specified and directed | 9 | Cum | 80 ₹720 | 75 ₹675 | 90 ₹810 | 150 ₹1,350 | 47 ₹423 Lowest | 100 ₹900 |
| 2.00 | M&L for Cement concreat type D2 (1:4:8) using 40mm graded stone aggregate, 100 mm thick as in sub base of path etc finished surface even and fair complete all as specified and directed. | 400 | Sqm | 180 ₹72,000 | 85 ₹34,000 | 30 ₹12,000 Lowest | 150 ₹60,000 | 55 ₹22,000 | 110 ₹44,000 |
| 3.00 | M&L for pre polished coloured cement concrete chequred tile of approved quality of size 300X300X 25mm thick on floors over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed with colour to match tiles complete all as specified and directed. | 400 | Sqm | 400 ₹1,60,000 | 465 ₹1,86,000 | 390 ₹1,56,000 Lowest | 420 ₹1,68,000 | 444 ₹1,77,600 | 400 ₹1,60,000 |
| 4.00 | M&L for Cement concrete 1:5:10 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing with interlocking paver blocks. | 60 | Cum | 1,500 ₹90,000 | 1,499 ₹89,940 | 590 ₹35,400 Lowest | 1,950 ₹1,17,000 | 999 ₹59,940 | 1,500 ₹90,000 |
| 5.00 | M&L for Sand filling under floors or in foundations including watering and consolidation | 20 | Cum | 500 ₹10,000 | 450 ₹9,000 | 500 ₹10,000 | 1,900 ₹38,000 | 888 ₹17,760 | 100 ₹2,000 Lowest |
| 6.00 | M&L for Machine pressed precast conctete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and as ditected. | 200 | Sqm | 600 ₹1,20,000 | 595 ₹1,19,000 | 350 ₹70,000 Lowest | 620 ₹1,24,000 | 666 ₹1,33,200 | 500 ₹1,00,000 |
| 7.00 | M&L for Machine pressed precast conctete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and as ditected. | 600 | Sqm | 500 ₹3,00,000 | 435 ₹2,61,000 | 455 ₹2,73,000 | 590 ₹3,54,000 | 388 ₹2,32,800 Lowest | 450 ₹2,70,000 |
| 8.00 | M&L for PCC 1:2:4 type B2 (using 40 mm graded aggregate) 100 mm thick as in hardstanding (The PCC will be laid with 12mm expansion Gap and the gap will be filled up with bituminous joint filler type A) complete all as specified and directed. | 100 | Sqm | 220 ₹22,000 | 325 ₹32,500 | 99 ₹9,900 Lowest | 200 ₹20,000 | 333 ₹33,300 | 150 ₹15,000 |
| 9.00 | M&L for cement concrete 1:3:6 Type C1 (20mm graded stone aggtts) as in filling in lintels upto 1.5M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing course, parapets and railings uppto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in , water troughs and the like including formwork, weathering, slightly rounded or chamfered angles and throating as directed | 5 | Cum | 2,500 ₹12,500 | 3,400 ₹17,000 | 2,390 ₹11,950 | 3,500 ₹17,500 | 1,333 ₹6,665 Lowest | 2,000 ₹10,000 |
| 10.00 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. (Make : Neco/ Raj/ SKR/ KK) | 5 | Cum | 5,000 ₹25,000 | 4,500 ₹22,500 | 4,500 ₹22,500 | 5,500 ₹27,500 | 4,444 ₹22,220 Lowest | 4,500 ₹22,500 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
30 Sept 2025, 6:00 pmClosed
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
REPAIR/ REPLACEMENT OF FENCING, DRAIN, BOUNDARY WALL, GRILL GRATING, MANHOLE COVER PAVED AREA AND OTHER MISC WORK IN KABUL LINE JCO/ OR AND FAFA ACCN AND OTM ACCN IN THE AREA OF AGE B/R-II UNDER GE (EAST) DELHI CANTT-10
2025_MES_728973_1
GE/DE-91/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D/ Cat a (i)
9 documents required · 9 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹98,000
Yes
7 Jan 2026
2 Sept 2025
2 Oct 2025
2 Sept 2025
30 Sept 2025
16 Sept 2025
Amount
Demolition of cement concrete unreinforced in Ground floor & paving not exc 15cm thickness and removal of debris from site all as specified and directed
M&L for Cement concreat type D2 (1:4:8) using 40mm graded stone aggregate, 100 mm thick as in sub base of path etc finished surface even and fair complete all as specified and directed.
M&L for pre polished coloured cement concrete chequred tile of approved quality of size 300X300X 25mm thick on floors over and including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed with colour to match tiles complete all as specified and directed.
M&L for Cement concrete 1:5:10 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing with interlocking paver blocks.
M&L for Sand filling under floors or in foundations including watering and consolidation
M&L for Machine pressed precast conctete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and as ditected.
M&L for Machine pressed precast conctete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and as ditected.
M&L for PCC 1:2:4 type B2 (using 40 mm graded aggregate) 100 mm thick as in hardstanding (The PCC will be laid with 12mm expansion Gap and the gap will be filled up with bituminous joint filler type A) complete all as specified and directed.
M&L for cement concrete 1:3:6 Type C1 (20mm graded stone aggtts) as in filling in lintels upto 1.5M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing course, parapets and railings uppto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in , water troughs and the like including formwork, weathering, slightly rounded or chamfered angles and throating as directed
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. (Make : Neco/ Raj/ SKR/ KK)
M & L for factory made pre cast RCC covers of M-25 grade cement concrete of size as directed by Engr-in-Charge jointed with cement mortar 1:3 (1 cement: 3 coarse sand), wherever required and all as specified. (Note: 10mm TMT reinforcement @ 100mm centre to centre both way shall be provided). (Make : Neco/ Raj/ SKR/ KK)
M & L in repairs Reinforced concrete pipes, class NP2, of bore 300 mm dia laid and jointed complete with collars and all as specified and as directed.
M&L for preparation of new or previously untreated concrete/cement surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of primer.
Dismantaling posts/struts (wood/steel or R.C.C.) any section including taking out embeded portion and making good disturbed ground and dismanteling of PCC in base fdn all as directed by Engr-in-Charge.
Dismantaling posts/struts (wood/steel or R.C.C.) any section including taking out embeded portion and making good disturbed ground in natural ground base fdn all as directed by Engr-in-Charge.
Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.
Dismantling fencing wire mesh, barbed wire any type as directed by Engineer - in - Charge.
Blank
S&F MS posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.
M&L for PCC type B-2(1:2:4) (40mm graded stone aggtts) as in mass filiing to posts of fences foundation etc all as directed by Engr-in-Charge.
S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured.
S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, for securing chain link fencing including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (Fe-410W GdeE-250).
Supply only Chain link MS galvanisd fencing, not exceeding 4 kg per sqm any size or type complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as directed.
Supply, laying and fixing of galvanised punched tape concertina coil of 600mm diameter of each round/roll, complete having glavanised spring steel core wire 2.5mm dia cold drawn steel, galvanised, punched of low carbon steel having series of sharp barbs uniformly punched alongwith its length 550 Nos, barbs on periphery per revolution, crimped on steel spring core wire (stretchable length 12 meter Appx) weight 7.00 kg of each coil all as complete,incl dismantling of existing coil of any type all as specified and directed by Engr-in-Charge.
Demolition of brick work or stone masonry built in cement mortar all as specified and directed.
M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exe 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
Taking down cement plaster of any description in any position incl racking out joints making for key, scrubbing down with water etc and removal of debris from site all as specified and directed.
M & L for rendering 15mm thick in cement mortar 1:4 on stone walls or other than fair faces of brick walls fiinished even and smooth without using extra cement complete all as specified.
M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat primer of complete all as specified and directed.
M&L for Preparation of old plastered surfaces of walls with complete removal existing treatment and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. of Gde Fe - 290, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
S & F MS frame work as in grills gratings, with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars and similar works confirming to Fe290 E-165, etc.all as specified and directed
Dismantling AC Sheets/CGI Sheets corrugated in roof coverings including ridges all as specified and directed
S & F Pre painted coloured galvalume aluminium Zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / Cladding to wall, fixed with self tapping screws as specified.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters & fixed with self tapping screws as specified.
Dismantling timber scantaling 40 sq cm and over in section in any position.
Dismantling structural steel work including welded fabricks frames, gates, framed truss etc.
M&L for rolled sections as in main and cross beams/columns, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates.(Fe-410 W Gde E-250 Quality A)
M&L for plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed.
M&L for Hardcore of gauge of broken bricks not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface
M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over 10 mm thick back coat in CM (1:3) complete.
Excavating in any type of soil in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface
Blank
S&F of RCC Precast Concrete Post (M-30) of size 150mm X 150mm X 2435mm height having two grooves of size 50 X 30mm, so as to receive 6 Nos. including Provn of 6 Nos of Precast concrete RCC Panels between Two post of size 1500mm X 300mm X 40mm thickness The post is reinforced with 4 Nos. 8mm dia Tor Bars with 4mm dia stir-ups @ 1.615m centre to centre150mm c/c; Panels are reinforced with 3 Nos. longitudinal bar of 8mm dia Tor steel & 6mm plain M.S Stir ups @ 150mm c/c. Manufactured by M-30 graded of concretes and including dismantling of old complete all as specifed and as directed. Note :- (a) Above ground level height will be measured for payment purpose. (b) Excavation of post holes for fixing of Columns shall be measured and paid seprately (c) The post may be fixed to the ground by digging a hole of 500 x500 x600mm and filled with 1:3:6 concrete after the post has been aligned in these holes. The post will be erected @ 1.615 m center to center. Make- Kreative concrete company or equivalent as approved by GE.
M&L for providing precast cement concrete louvers and jallies, 35 mm thick type B- 0, 1:2:4 (using 12.5mm graded stone aggregate) (measured solid) including all moulding and necessary form work and set in cement mortar 1:4 fixed in repairs complete all as specifed and as directed.
S&F precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.
Demolition and breaking up old unserviceable salt glazed stone ware pipe 150mm bore at any depth set in cement morter incl PCC bed complete all as specified and directed.
Description all as per srl item No 48 above but for 200mm dia.
M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) bedding for sewage lines of 150mm bore incl packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
Description all as per sl item No 50 above but for bed of sewage line of 200mm bore.
Supply and fixed class SN-8, dia of pipe 150mm & thickness of pipe as specified in IS 16098 (Part-2):2013, clause 6.3.1 table no 5 structured wall polythelene piping system (pipe with online/offline coupler and elastomeric sealing ring) with non smooth external anular corrugated and smooth internal surface (double wall) for non pressure underground sewerage & drainage application polythylene piping fitted with help of coupler attached with one end of pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the spigot end, lowering the same into the trench, laying at prescribed gradient, depth and alignment, testing the water tightness of the joint, ensuring the continuity tests of the specified pipe segments etc including all necessary fittings (cost of fittings, rubber rings, gaskets etc includded) complete all as specified and directed by Engineer-in-charge.
Description all as per sl item No 52 above but 200 mm dia
Excavation in trenches not exc 1.5m wide and not exceeding 1.5 mtr in depth for foundation etc shaft, cesspits, manholes sewage line etc not exc. 10 Sqm on plan and getting out complete all as specified and directed.
Description all as per item No 54 here-in-before but depth exceeding 1.5mts and not exc 3mtr all as specified and directed.
Returning, filling in, trenches with soil in layers not exc 25 cm thick, watering and well ramming complete all as specified and directed.
Removal of surplus soil to a distance not exc 50 mtr away & deposting where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
M/S SIMRAN CONSTRUCTION CO (BID ID -3429396)
Vipul Construction (BID ID -3428903)
STAR CONSTRUCTION CO (BID ID -3433836)
M/s Durga Traders (BID ID -3427458)
M/s Shubh Enterprises (BID ID -3433886)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .