Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.2 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹19.7 L+₹29,469 (1.52%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹21.5 L+₹2.0 L (10.5%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹24.4 L+₹4.9 L (25.4%)Rejected-Finance 184 TENGPUNA PULWAMA PULWAMA PULWAMA JAMMU KASHMIR 192301 UDYAM JK 15 0009999 | PULWAMA | JAMMU AND KASHMIR | 192301 | L4 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
16 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) AWANTIPUR
GE (AF) AWANTIPUR, 8 FBSU, AF AWANTIPUR
WELCOME MAINTENANCE OF E/M AND B/R WORKS FOR OMQ AT 8FBSU
2022_MES_539286_1
GE (AF) AWA-25/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (AF) AWANTIPUR
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (AF) AWANTIPUR
₹60,000
Yes
5 Sept 2022
19 Jul 2022
18 Aug 2022
19 Jul 2022
16 Aug 2022
3 Aug 2022
Amount
M & L Preparation of old surfaces of walls, plastered or un-plastered by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss & efflorescent salts, removing all vegetation growth and trading oil and greasy spots and applying one coat of white wash on old white washed surfaces of walls complete all as specified.
All as per item no 01 above but on Ceiling Surface,Complete all as specified and directed.
M&L for preparing old surfaces of walls plastered or un-plastered by brooming down with steel or wire brush and scraping down smoke soot, moulds moss & efflorescent salt and trading oil and greasy spots , washing rubbing down and stopping of distempered and painted surface & removing all vegetation growth, nails and making good holes,cracks etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of distemper oil emulsion on old prepared surfaces of walls complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of ceiling, cornices etc and applying one coats of oil bound distemper complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.
M&L Rendering cement plaster 15mm thick in cement mortar 1:6 on other than fair faces of brick wall or on stone masonry surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.
M & L for applying of Birla/JK white wall putty approx 3 mm thick in two layer as per manufacturer's instruction including preparation surface and make the surface smooth by rubbing with sand papers etc complete all as specified and directed.
M&L for preparation of newly plastered surface on walls and applying two coats of oil bound distemper incl primer complete all as specified and directed.
M&L for complete removal of existing treatement by scraping, washing, rubbing down or stopping distempered or painted surfaces etc of walls plastered or un-plastered & removing all vegetation growth, cleaning and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.
M&L for preparing of old painted wooden surfaces over 10cm width or girth and making good including knotting and stopping,cleaning etc complete by necessary putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparing of old painted steel surfaces over 10cm width or girth and making good with & including by necessary red lead putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint on old prepared surfaces of steel complete all as specified and directed.
Demolition of cement concrete to ground floor(unreinforced) and paving n.exc 15cm thickness (below or above ground level) and removing rubbish of out side MOD land, complete all as specified and directed.
M&L for cement concrete 1:3:6 type C-2 (40mm graded aggregate) 75 mm thick for sub-base in sub floor sub base, floor and paving etc cement complete all as specifiied and directed.
M&L for PCC 25mm thick 1:2:4 type B1( using 12.5mm graded crushed stone aggregates )as in sub flooring , complete all specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all specified and directed.
M&L coloured vitrified tiles 9 to 10mm thick (square or rectangular ) of area exc. 0.18 sqm and not exc 0.36 sqm and laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement, complete all specified and directed.
-ditto- but on vertical surfaces such as skirting incl rendering in cement mortar 1:3 rough finish to receive the tiles complete all as specified and directed.
M&L coloured/printed non skid ceramic tiles 7 to 8mm thick (squre/rectangular) area of each tile exc 0.11 but not exc 0.16 sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement, complete all specified and directed.
M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 350x 250x 7 mm/ 450X 350X 7mm/450x300x7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
M&L for 18-20mm thick granite stone (slab) of any colour/type, (table rubbed and polished) work as in floors/ vertical surfaces, cooking platforms and like, set in neat cement including pointing in white cement with admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed in cement mortor (1:6) laid and jointed with gray cement slurry mixed with pigment, , complete all specified and directed.
M&L for Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and as directed
Demolition of stone/brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work etc complete all as specified and directed
M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius in cement mortar 1:6, complete all as specified and directed
M&L for Brick work with old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed
Demolition of cement concrete (reinforced) to Roofs, floors (other than ground floors), beams,MH cover, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
M&L RCC (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like Type B1 1:2:4 (20 mm gradded aggregate) incl demolition of cement concrete reinforced of any description in any positio complete all specified and directed.
S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all specified and directed.
Form work to soffits of suspended slabs n exc 200mm thick (Horizontal or sloping) rough finished surfaces of concrete, complete all specified and directed.
Dismantling of wall/ ceiling sheets (fibre, pulp, insulation etc) or insulation sheets/slabs/blankets any thickness including cover fillets complete all as specified.
S&F 12mm thick of plywood, grade BWP, type BB fixed with screw to mild steel frame work as in ceiling complete all as specified and driected by Engineer-in-Charge.
M&L for preparing of New or previous untreated wooden surfaces over 10cm width or girth and making good including primer and make the surface smooth by rubbing with sand papers etc and applying two coat of synthetic enamel paint complete all as specified and directed.
Prelaminated particle board 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with allaround 6mm thick teak wood beading as in cup board shutters, shelves,palmet boxes etc, fixed to timber frame including dismantling of old particle board complete all as specified.
S&F 40 mm dia, brass, knobs for cupboard fixed with nut, screw and washer of mild steel, bright finised complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed.
S&F for ball catcher for cupboard/cabinet etc complete all as specified and directed.
S&F in repairs Health Faucet CP with Rubbit Cleaning System , 1.25 m Long PVC Flexible Tube & ABS Wall Hook . Make : (Hindware :- Cat Part No - F160027) , ( Prayag : CAT Part No : BEA-40S ) , complete all as specified and directed.
S&F in repair CP grating 125mm dia as suitable to existing trap as per requirement , complete all specified and directed.
S&F in repairs mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete fixed with screw or by welding complete all as specified and directed.
S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete.
Taking down chowkhat or frames with shutter not exceeding 1.5 Sqm each with shutter (without taking off shutters from the frames) and removing from site including making the disturbed portion , complete all specified and directed.
All as per srl item No 40 above but size exceeding 1.5 Sqm and not exceeding 4.00 Sqm each complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails , MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colur PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, & joined together with solvent cement , supplying & fixing in the frame at site as per specification complete all specified and directed.
S&F aluminum anodized, barrel tower bolts of extruded section, length of bolt 150 mm , complete all specified and directed.
S&F aluminum alloy handle of extruded section of size 125 mm, complete all specified and directed.
S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all specified and directed.
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp and stape ( bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt and sliding bolt of extruded section or cast aluminium alloy and fixed, complete all specified and directed.
M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane incluing Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips complete all as specified and directed.
M&L for 3mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips complete all as specified and directed.
Taking up or down steel tubing of 15mm bore and connections including cleaning for re-fixing or removal to store complete all as specified and directed.
S&F GI tubes medium grade 15mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Fixing only GI tubes medium grade 15mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors (Note: Serviceable pipe retrieved under srl item 50 here in before shall be reused) complete all as specified and directed
Taking up or down steel tubing of 20mm bore and connections including cleaning for re-fixing or removal to store complete all as specified and directed.
S&F GI tubes medium grade 20 mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Fixing only GI tubes medium grade 20 mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors (Note: Serviceable pipe retrieved under srl item 53 here in before shall be reused) complete all as specified and directed
M&L for cutting chases, pinning in making good to facing where required and pointed in CM 1:3 to ends or edge of landing, steps cills, sunshade, shelves etc and cutting chases for concealed water tubing in stone concrete block or slab walls etc and making good cutting n exc 10 cm girth complete all as specified and directed
Dismentalling of plain or corrugated steel sheeting of any gauge, thickness etc in roof coverings/cladding/eave etc for fixing of water storage tank complete all as specified.
Refixing Plain or corrugated steel sheeting, any gauge, thickness, roof coverings with two corrugation side lap fixed with L' type or 'J' type or cranked hooked bolts and dome type bitumen washers complete all as specified and directed.
S&F 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position incl dismantling PVC water sotrage tanks of capacity more than 250 to 500 litres capacity complete all as specified and directed.
M&L for Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 250 & n exc 500 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc complete all as specified and directed.
M&L for Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 500 & n exc 1000 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc complete all as specified and directed.
S&F in repair ball brass valve ,high pressure with polythene float and flynut complete screwed for iron pipe or ferrule 20mm bore fixed complete all as specified and directed
S&F in repair 20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S&F in repair PVC valveless syphonic action type low level flushing cistern 10ltr capacity white with all internal fittings and handles knob/push including brackets PVC connection 45cm long including nut and PVC washer at both ends with brass chromium plated coupling 32mm bore including 32mm bore PVC long bend flush pipe 90cm long complete all as specified and directed.
S&F in repair Vitreous China wash down water closet (pedestal pattern), White/coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and chromium plated jet including PVC connection, fixed complete including demolition of old unservicable WC and provision of plain cement concrete M-15, type B-I, using 20mm graded crushed stone aggregate, fixed in repairs complete all as specified and directed.
S&F in repair Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc and making good to floors to match existing, in repair, complete all as specified and directed.
S&F in repairs vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, including waste fitting , brass, chromium plated with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC connection and 15mm size with CP brass coupling nuts of length 450mm, trap, grating and union for discharge pipe, chain and plug and porcelain stoper and all accessories fixed in repair complete all as specified and directed.
S&F in repair 32mm dia Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm incl connected fittings and jointing complete all as specified and directed.
S&F in repair wall mixture for mixing (Hot and Cold) 15mm bore chromium plated cast copper alloy with capstan head screwed for iron pipe fixed complete all as specified and directed
S&F in repair sink mixture for mixing (Hot and Cold) 15mm bore chromium plated cast copper alloy with capstan head screwed for iron pipe fixed complete all as specified and directed.
S&F in repair Brass CP central hole wash basin mixer for hot & cold for 15mm dia complete fixed to connection complete all as specified and directed.
S&F in repair CP Bib tap, 15mm dia, cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or brass ferrule and fixed in repair all as specifiedscrewed for iron pipe or brass ferrule, complete all as specified and directed.
S&F in repair CP Stop valve/Angle valve 15mm bore cast copper alloy with crutch and butter fly handle screwed down high pressure,screwed both ends for pipe or for unions, complete all as specified and directed.
S&F in repair 15 mm bore PVC connection with PTMT of length 450 mm complete all as specified and directed.
S&F in repair CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.
S&F in repair of PVC (SWR) floor trap of 75mm dia, plain with grating incl jointing with solvent cement complete all as specified and directed.
S&F in repair of PVC (SWR) floor trap of 110mm dia, plain with grating incl jointing with solvent cement complete all as specified and directed.
S&F in repair of PVC (SWR) bends any radius of 75mm bore, complete all as specified and directed.
S&F in repair of PVC (SWR) bends any radius of 110mm bore, complete all as specified and directed.
S&F PVC (SWR) pipes single socketed,75mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed.
S&F PVC (SWR) pipes single socketed,110mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed.
S&F PVC SWR) 'T' junction 75mm dia complete all as specified and directed.
S&F PVC SWR) 'T' junction 110mm dia complete all as specified and directed.
S&F PVC (SWR) vent cowl 75mm dia complete all as specified and directed.
Taking down carefully aluminium/copper point wiring (light, bell, fan, socket) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, holder, fittings and terminal box sheets complete, stacking material at site and making good the disturbed surface of walls/ floors to match with existing surface complete all as specified.
M&L for point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated, unsheathed, FRLS type, 1100 volts grade,1.5 sqmm copper conductor cable unsheathed as earth continuity cable including concealed pressed steel GI terminal boxes of suitable way with 3 mm thick laminated sheed cover for mounting of switches, socket, fan regulators, connected to common earth dolly complete all as specified for the following:- (a) One light /fan/ point controlled by one nos, one way 5/6 Amps switch.
One 3/5 pin socket outlet, 5/6 Amp on the same board controlled by one nos, one way switch.
One 3/5 pin socket outlet, 5/6 Amp, independent controlled by one nos, one way switch.
One bell point controlled by one no bell push switch
All as per srl item No 2.00 here-in-before but using cable of size 2.5 sqmm (for phase & neutral) and 1.5 sqmm as continuous earth cable for 15/16 Amps socket outlet, independent controlled by one nos, one way switch complete all as specified.
S&F in replacement of piano type switch one way, SP, flush type, 5/6 Amps, 230 volts AC, 50 Hz complete all as specified.
S&F in replacement of piano type bell push switch one way, SP, flush type, 5/6 Amps, 230 volts AC, 50 Hz complete all as specified.
S&F in replacement of piano type socket outlet flush type, 5 pin, 5/6 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified.
S&F in replacement of piano type switch socket combination flush type, 6 pin, 5/15 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified.
S&F in replacement of electronic type ceiling fan regulator, 230 volts, single phase, flush type complete all as specified.
S&F in replacement of ceiling rose 3 terminals, PVC/polycarbonate/bakelite, isolated body 230 volts AC, 50 Hz complete all as specified.
S&F in replacement of electric call bell ding dong type suitable for 230 volts, single phase AC supply all as specified.
S&F in replacement of batten holder PVC/polycarbonate with cord grip, B-22 base type suitable for & including 7 watts LED bulb, 230 volts AC, 50 Hz complete all as specified.
S&F in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FR type, 1100 volts grade 2 x 4 sqmm complete drawn in and includindg casing caping ISI marked of suitable size and its accessories along with 1x 4.0 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified.
S&F in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FR type, 1100 volts grade 2 x 6 sqmm complete drawn in existing conduit along with 1x 6.0 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified.
S&F in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FR type, 1100 volts grade 2 x 10 sqmm complete drawn in and includindg casing caping ISI marked of suitable size and its accessories along with 1x 10 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified.
S&F in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating material like polyester epoxy quoted surface mounting 4 way TPN 415 volts, vertical type, surface mounting with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete with & including one No. MCCB 100 Amps 3 pole 25 kA fixed type for incoming complete all as specified.
S&F in replacement of sheet metal enclosure DB TPN 4 way, double door, 415 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB TP/TPN as incomer & MCB SP as outgoing complete all as specified.
S&F in replacement of sheet metal enclosure DB SPN 8 way, double door, 230 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB DP/SPN as incomer & MCB SP as outgoing complete all as specified.
S&F in replacement of sheet metal enclosure DB SPN 12 way, double door, 230 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB DP/SPN as incomer & MCB SP as outgoing complete all as specified.
S&F in replacement of sheet metal steel plug & socket DB SP with metal clad 2 pin & earth plug and socket SPN, 20 Amps, 230 volts AC, surface mounting type complete with one MCB SP, 20 Amps, 10 kA complete all as specified.
S&F in replacement of MCBs, SP, 6-32 Amps, 230 volts,10 kA rupturing capacity, C curve type complete all as specified.
S&F in replacement of MCBs, SPN, 40-63 Amps, 230 volts, 10 kA rupturing capacity, C curve type complete all as specified.
S&F in replacement of MCBs, TPN, 40-63 Amps, 415 volts, 10 kA rupturing capacity, C curve type complete all as specified.
Supply & fix in replacement of MCCB TP 100 Amp, 25 kA, 415 V microprocessor LSIG energy release complying with IEC 60947-2 frame size P160 microprocessor trip unit with LSIG protection, OLED display , multi function metering with accuracy class 0.5 for V&I adjustable overload with delay/short circuit with adjustable/ Ground Fault/ Instantaneous I2T On/Off for precise coordination , ZSI for intelligent discrimination, alarm managment system complete all as specified. Make- Hager Cat part No HHS100NR/ Legrand/ Havells
S&F in replacement FRLS PVC insulated unsheathed multi core stranded copper conductor cable of size 2.5 sqmm , 3 core LT 1100 volt grade complete
S&F in replacement LED tube light fitting 1x20 watts, 220 volts AC, 1200 mm, with aluminium housing & integrated electronic driver complete with driver with polycarbonate diffuser & thd< 10% including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose complete all as specified. Make- Havells ENDURALINEARNEOBS20WLED/ Wipro/ Crompton
S&F in replacement of LED bulk head light fittings weather proof, anti corrosion wall/ceiling mounted opel colour decorative, round shape with PC cover suitable for & including 7 watts LED lamp, lamp holders complete with all accessories all as specified. Make- Halonix/ Wipro/ Havells
S&F in replacement of LED tube light fitting, box type 230 volts AC suitable for & including 9/10 watts LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified. Make-Havells/Wipro/Phillips
S&F in replacement of recess mounted compact vertical, round shaped energy saving LED downlighter luminaire 5 watts, 4000 K, 230 volts, 50 Hz complete with suitable LED driver lamp & all accessories internally prewired & including connecting up with three core twisted flexible copper conductor cable of suitable size including cutting of suitable hole in false ceiling complete all as specified.
S&F in replacement of LED wall light fittings 6/7 watt, 230 volts AC, indoor type made up of polycarbonate complete with lamp holder , LED lamp 6/7 watts, 4000 K, LED driver, connector block pre wired with all accessories all as specified.
S&F in replacement Inverter LED batten 20/22 Watt with Opal Diffuser, 6000 K IP 20, battery back up to 3 hrs & Functioning as per product TDS complete all including and connecting up including mounting with all accessories. Make- Halonix HLB -0822-CW-INV /Havells/ Wipro
S&F in replacement Inverter LED bulk head 10 Watt, IP 65 with Opal Diffuser, IP 20, battery back up & Functioning as per product TDS complete all including and connecting up including mounting with all accessories. Make- Halonix HLBH -15-10-CW-INV /Havells/ Wipro
S&F in replacement Inverter LED building security light 60 Watt, IP 66 with battery back up, Auto on/off/dimm Functioning as per product TDS complete all including and connecting up including mounting including GI pipe of suitable dia and clamps, nut, bolts, washers with all accessories. Make- Halonix HLSLD-ML04-30-CWL-INV-RTC-R /Havells/ Wipro
S&F in replacement of 25 mm dia medium grade rigid non metallic PVC conduit alongwith its fixing accessories & making good to the disturbed surface to match with the existing surface complete all as specified.
S&F in replacement of 25x16 mm medium grade casing caping alongwith its fixing accessories & making good to the disturbed surface to match with the existing surface complete all as specified.
S&F in replacement inverter LED bulb 9W as per IS 16102 (Part-I &2) with emergency time 4 hours (battery back up with Li Ion battery ) base cap B22 D, with electronic driver, lumen maintenance for 50000 hours @ 70 insulated cu wire internal wiring and operating voltage from 140 v to 270 V, PF>0.9 system lumen efficacy ≥ 100 lumen/watt 6500 K, THD < 30% complete all as specified and directed.
M&L for checking of loose connections, burnt wire removing old burnt wire including making new termination by peeling out new wire, opening and cleaning of existing switch boards, replacement of old worn out rusted screws, and replacement of broken/damaged hylum sheet with new one as required at site complete all as specified and as directed
M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI wire 4 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board /panel/ test point at the other including watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 20 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil complete all as specified.
Note :- An amount of Rs. 25,757.50 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
M/S ABBAS M. ENTERPRISES
MS Ghulam Hassan and Sons
M/S BASHIR AHMAD AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .