Rate contract for Electrical works or financial year 2020-21 of VIP Belt down town of PHE Mech Division Srinagar

Rewinding & Repairs/ replacements to the deep well/vertical type open well submersible pumping units

2HP/1P; Submersible motor: - Cost on account of to-and-fro carriage from site to workshop & back to site including head loads and lifts. The job includes dismantling, extraction of the damaged windings from slots, setting right the fused slots if any & preparing the stator assembly for rewinding. – (23.26% of the total quoted/negotiated rate per job shall be allowed for this item.)

Cost on account of complete/partial rewinding of the submersible motor by way of using PVC insulated Copper wire of suitable gauge. The job includes the Skilled labour, insulated paper and PVC sleeves. The job also includes the testing of motor on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (41.86% of the total quoted/negotiated rate per kg shall be allowed for this item.)

Fabrication/Fitting of GM bearing bushes (4 Nos) of required size as per sample. The bushes are to be fabricated out of suitable size GM bar. The job includes cutting, boring, facing turning to the required size, and press fit in the bearing housing of the motor, after dismantling of damaged ones. The damaged / unserviceable material, if any, shall be property of firm. (11.63% of the total negotiated/quoted rate per job shall be allowed for this item.)

Providing & Fitting of Racer/ Thrust Bearing to replace the damaged one as per sample (23.25% of the total negotiated/quoted rates per job shall be allowed for this item.)

Total work from item 1 to 1,04

5HP/3P; Submersible motor: - Cost on account of to-and-fro carriage from site to workshop & back to site including head loads and lifts. The job includes dismantling, extraction of the damaged windings from slots, setting right the fused slots if any & preparing the stator assembly for rewinding. (30.38% of the total quoted/negotiated rate per job shall be allowed for this item.)

Cost on account of complete/partial rewinding of the submersible motor by way of using PVC insulated Copper wire of suitable gauge. The job includes the Skilled labour, insulated paper and PVC sleeves. The job also includes the testing of motor on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (22.78% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Fabrication/Fitting of GM bearing bushes (4 Nos) of required size as per sample. The bushes are to be fabricated out of suitable size GM bar. The job includes cutting, boring, facing turning to the required size, and press fit in the bearing housing of the motor, after dismantling of damaged ones. The damaged / unserviceable material, if any, shall be property of firm. (16.46% of the total negotiated/quoted rates per job shall be allowed for this item.)

Providing & Fitting of Racer/ Thrust Bearing to replace the damaged one as per sample, (30.38% of the total negotiated/quoted rates per job shall be allowed for this item.)

Total item from 2.00 to 2.03

7.5HP/3P; - Submersible motor: -Cost on account of to-and-fro carriage from site to workshop & back to site including head loads and lifts. The job includes dismantling, extraction of the damaged windings from slots, setting right the fused slots if any & preparing the stator assembly for rewinding. (28.28% of the total quoted/negotiated rates per job shall be allowed for this item.)

Cost on account of complete/partial rewinding of the submersible motor by way of using PVC insulated Copper wire of suitable gauge. The job includes the Skilled labour, insulated paper and PVC sleeves. The job also includes the testing of motor on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (18.19% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Fabrication/Fitting of GM bearing bushes (4 Nos) of required size as per sample. The bushes are to be fabricated out of suitable size GM bar. The job includes cutting, boring, facing turning to the required size, and press fit in the bearing housing of the motor, after dismantling of damaged ones. The damaged / unserviceable material, if any, shall be property of firm. (17.17% of the total negotiated/quoted rates per job shall be allowed for this item.)

Providing & Fitting of Racer/ Thrust Bearing (V4) to replace the damaged one as per sample, (36.36% of the total negotiated/quoted rates per job shall be allowed for this item.)

Total from item 3.00 to 3.03

10HP/3P Submersible motor: - Cost on account of to-and-fro carriage from site to workshop & back to site including head loads and lifts. The job includes dismantling, extraction of the damaged windings from slots, setting right the fused slots if any & preparing the stator assembly for rewinding. (28.28% of the total quoted/negotiated rates per job shall be allowed for this item.)

Cost on account of complete/partial rewinding of the submersible motor by way of using PVC insulated Copper wire of suitable gauge. The job includes the Skilled labour, insulated paper and PVC sleeves. The job also includes the testing of motor on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (18.19% of the total quoted/negotiated rates per Kg shall be allowed for this item.)

Fabrication/Fitting of GM bearing bushes (4 Nos) of required size as per sample. The bushes are to be fabricated out of suitable size GM bar. The job includes cutting, boring, facing turning to the required size, and press fit in the bearing housing of the motor, after dismantling of damaged ones. The damaged / unserviceable material, if any, shall be property of firm. (17.17% of the total negotiated/quoted rates per job shall be allowed for this item.)

Providing & Fitting of Racer/ Thrust Bearing (V4) to replace the damaged one as per sample, (36.36% of the total negotiated/quoted rates per job shall be allowed for this item.)

Total item from sl no 4.00 to 4.03

12.5HP/3P; Submersible motor: -Cost on account of to-and-fro carriage from site to workshop & back to site including head loads and lifts. The job includes dismantling, extraction of the damaged windings from slots, setting right the fused slots if any & preparing the stator assembly for rewinding. (27.52% of the total quoted/negotiated rate per job shall be allowed for this item.)

Cost on account of complete/partial rewinding of the submersible motor by way of using PVC insulated Copper wire of suitable gauge. The job includes the Skilled labour, insulated paper and PVC sleeves. The job also includes the testing of motor on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (16.51% of the total quoted/negotiated rate per kg shall be allowed for this item.)

Fabrication/Fitting of GM bearing bushes (4 Nos) of required size as per sample. The bushes are to be fabricated out of suitable size GM bar. The job includes cutting, boring, facing turning to the required size, and press fit in the bearing housing of the motor, after dismantling of damaged ones. The damaged / unserviceable material, if any, shall be property of firm. (22.94% of the total negotiated/quoted rates per job shall be allowed for this item.)

Providing & Fitting of Racer/ Thrust Bearing (V4) to replace the damaged one as per sample, (33.03% of the total negotiated/quoted rates per job shall be allowed for this item.)

Total from item No 5.00 to 5.03

15HP/3P- Submersible motor: - Cost on account of to-and-fro carriage from site to workshop & back to site including head loads and lifts. The job includes dismantling, extraction of the damaged windings from slots, setting right the fused slots if any & preparing the stator assembly for rewinding. (24.39% of the total quoted/negotiated rates Per job shall be allowed for this item.)

Cost on account of complete/partial rewinding of the submersible motor by way of using PVC insulated Copper wire of suitable gauge. The job includes the Skilled labour, insulated paper and PVC sleeves. The job also includes the testing of motor on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (14.63% of the total quoted/negotiated rate per kg shall be allowed for this item.)

Fabrication/Fitting of GM bearing bushes (4 Nos) of required size as per sample. The bushes are to be fabricated out of suitable size GM bar. The job includes cutting, boring, facing turning to the required size, and press fit in the bearing housing of the motor, after dismantling of damaged ones. The damaged / unserviceable material, if any, shall be property of firm. (20.33% of the total negotiated/quoted rates per job shall be allowed for this item.)

Providing and fitting of Racer/Thrust Bearing (V6) to replace the damaged one as per sample. (40.65 %) to the total negotiated /quoted rates per job shall be allowed for this item

Total from item 6.00 to 6.03

17.5HP/3P Submersible motor: -Cost on account of to-and-fro carriage from site to workshop & back to site including head loads and lifts. The job includes dismantling, extraction of the damaged windings from slots, setting right the fused slots if any & preparing the stator assembly for rewinding. (24.39% of the total quoted/negotiated rates per job shall be allowed for this item.)

Cost on account of complete/partial rewinding of the submersible motor by way of using PVC insulated Copper wire of suitable gauge. The job includes the Skilled labour, insulated paper and PVC sleeves. The job also includes the testing of motor on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (14.63% of the total quoted/negotiated rates Per kg shall be allowed for this item.)

Fabrication/Fitting of GM bearing bushes (4 Nos) of required size as per sample. The bushes are to be fabricated out of suitable size GM bar. The job includes cutting, boring, facing turning to the required size, and press fit in the bearing housing of the motor, after dismantling of damaged ones. The damaged / unserviceable material, if any, shall be property of firm. (20.33% of the total negotiated/quoted rates per job shall be allowed for this item.)

Providing & Fitting of Racer/ Thrust Bearing (V6) to replace the damaged one as per sample, (40.65% of the total negotiated/quoted rates per job shall be allowed for this item.)

Total from 7.00 to 7.03

20HP/3P Submersible motor: - Cost on account of to-and-fro carriage from site to workshop & back to site including head loads and lifts. The job includes dismantling, extraction of the damaged windings from slots, setting right the fused slots if any & preparing the stator assembly for rewinding. (25.32% of the total quoted/negotiated rates per job shall be allowed for this item.)

Cost on account of complete/partial rewinding of the submersible motor by way of using PVC insulated Copper wire of suitable gauge. The job includes the Skilled labour, insulated paper and PVC sleeves. The job also includes the testing of motor on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (11.39% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Fabrication/Fitting of GM bearing bushes (4 Nos) of required size as per sample. The bushes are to be fabricated out of suitable size GM bar. The job includes cutting, boring, facing turning to the required size, and press fit in the bearing housing of the motor, after dismantling of damaged ones. The damaged / unserviceable material, if any, shall be property of firm. (18.99% of the total negotiated/quoted rates per job shall be allowed for this item.)

Providing & Fitting of Racer/ Thrust Bearing (V8) to replace the damaged one as per sample, (44.30% of the total negotiated/quoted rates per job shall be allowed for this item.)

Total from item No 8.00 to 8.03

25HP/3P; Submersible motor: -Cost on account of to-and-fro carriage from site to workshop & back to site including head loads and lifts. The job includes dismantling, extraction of the damaged windings from slots, setting right the fused slots if any & preparing the stator assembly for rewinding. (25.32% of the total quoted/negotiated rates per job shall be allowed for this item.)

Cost on account of complete/partial rewinding of the submersible motor by way of using PVC insulated Copper wire of suitable gauge. The job includes the Skilled labour, insulated paper and PVC sleeves. The job also includes the testing of motor on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (11.39% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Fabrication/Fitting of GM bearing bushes (4 Nos) of required size as per sample. The bushes are to be fabricated out of suitable size GM bar. The job includes cutting, boring, facing turning to the required size, and press fit in the bearing housing of the motor, after dismantling of damaged ones. The damaged / unserviceable material, if any, shall be property of firm. (18.99% of the total negotiated/quoted rates per job shall be allowed for this item.)

Providing & Fitting of Racer/ Thrust Bearing (V8) to replace the damaged one as per sample, (44.30% of the total negotiated/quoted rates per job shall be allowed for this item.)

Total from Sl No 9.00 to 9.03

Rewinding & Repairs/Replacements to Open Well Horizontal shaft submersible pumping unit.

10HP/3P Open well Submersible motor: - Cost on account of to-and-fro carriage from site to workshop & back to site including head loads and lifts the job includes dismantling, extraction of the damaged windings from slots, setting right the fused slots if any & preparing the stator assembly for rewinding. For 10 HP motor. (16.81% of the total quoted/negotiated rates per job shall be allowed for this item.)

Cost on account of complete/ partial rewinding of the motor unit by way of using PVC insulated Copper wire of suitable gauge. The job includes the Skilled labour, insulated paper and PVC sleeves. The job also includes complete assembling & testing of motor unit on full load at site. (The rates are inclusive of cost on account of deduction of old scrap) (10.80% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Providing and fitting of deep groove ball bearing of size

6305 (6.96%) of the total quoted rates per job shall be allowed to the firm

6306 (9.73%) of the total quoted rates per job shall be allowed to the firm

Providing and filling of Gear oil/ T-oil (1.68% of the total quoted/negotiated rates- per liter shall be allowed for this item.)

Providing and fitting of Mechanical Seal for motor (54.02% of the total quoted/negotiated rates per job shall be allowed for this item.)

Total from Sl No 10 to 10.07

12.5HP/3P; Open well submersible motor Cost on account of to-and-fro carriage from site to workshop & back to site including head loads and lifts the job includes dismantling, extraction of the damaged windings from slots, setting right the fused slots if any & preparing the stator assembly for rewinding. For 10 HP motor. (14.44% of the total quoted/negotiated rates per job shall be allowed for this item.)

Cost on account of complete/ partial rewinding of the motor unit by way of using PVC insulated Copper wire of suitable gauge. The job includes the Skilled labour, insulated paper and PVC sleeves. The job also includes complete assembling & testing of motor unit on full load at site. (The rates are inclusive of cost on account of deduction of old scrap) (9.28% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Providing and fitting of deep groove ball bearing of size

6306 @ 8.35% of the total quoted/negotiated rates per job shall be allowed to the firm

6307 @ 9.79% of the total quoted/negotiated rates pr job shall be allowed to the firm

Providing and filling of Gear oil/ T-oil (1.44% of the total quoted/negotiated rates per liter shall be allowed for this item.)

Providing and fitting of Mechanical Seal for motor (56.70% of the total quoted/negotiated rates per job shall be allowed for this item.)

Total from Sl No 11 to 11.06

Rewinding & Repairs / replacements to the Horizontal Motors Motor

From 5HP to 10HP Horizontal Motor Cost on account of the disconnecting of the motor unit from the circuit & dismantling, to remove the damaged bearings on the DE/NDE to be replaced by the new ones. The job includes arranging of the bearing puller & all other necessary tools/tackles along with the greasing/lubrication as per site requirement. The job also includes assembling of the motor unit & testing on full load at site. (26.67% of the total quoted/negotiated rates per job shall be allowed for this item

From 12.5 HP to 20HP Horizontal motor Cost on account of the disconnecting of the motor unit from the circuit & dismantling, to remove the damaged bearings on the DE/NDE to be replaced by the new ones. The job includes arranging of the bearing puller & all other necessary tools/tackles along with the greasing/lubrication as per site requirement. The job also includes assembling of the motor unit & testing on full load at site. (33.33% of the total quoted/negotiated rates per job shall be allowed for this item

From 25 HP to 40HP Horizontal motor Cost on account of the disconnecting of the motor unit from the circuit & dismantling, to remove the damaged bearings on the DE/NDE to be replaced by the new ones. The job includes arranging of the bearing puller & all other necessary tools/tackles along with the greasing/lubrication as per site requirement. The job also includes assembling of the motor unit & testing on full load at site. (40% of the total quoted/negotiated rates per job shall be allowed for this item

Total from Sl No 12 to 12.03

5HP/3P Horizontal motor: - Cost on account of disengaging of the unit from the circuit and to-and-fro carriage from site to workshop & back to site including head loads and lifts. The job includes dismantling, extraction of the damaged windings from slots, setting right the fused slots if any & preparing the stator assembly for the necessary rewinding. (48.08% of the total quoted/negotiated rates per job shall be allowed for this item.)

Cost on account of rewinding of the motor unit by way of using bare Copper wire of suitable gauge & pitch. The job includes engagement of skilled labour, use of insulated paper, PVC sleeves, bamboo sticks varnishing after rewinding and proper drying after. The job also includes testing of motor unit on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (34.62% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of the Deep Groove Ball Bearings to be used on driving & non driving end of AC motors. Of size 6303 (17.30% of the total quoted/negotiated rates per job shall be allowed for this item.

Total Sl No 13.01 to 13.02

7.5HP/3P; Horizontal motor: - Cost on account of rewinding of the motor unit by way of using bare Copper wire of suitable gauge & pitch. The job includes engagement of skilled labour, use of insulated paper, PVC sleeves, bamboo sticks varnishing after rewinding and proper drying after. The job also includes testing of motor unit on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (48.08% of the total quoted/negotiated rates per job shall be allowed for this item.)

Cost on account of rewinding of the motor unit by way of using bare Copper wire of suitable gauge & pitch. The job includes engagement of skilled labour, use of insulated paper, PVC sleeves, bamboo sticks varnishing after rewinding and proper drying after. The job also includes testing of motor unit on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (34.62% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of the Deep Groove Ball Bearings to be used on driving & non driving end of AC motors. Of size 6303 (17.30% of the total quoted/negotiated rates per job shall be allowed for this item.

Total from item 14 to 14.02

10HP/3P Horizontal motor Cost on account of rewinding of the motor unit by way of using bare Copper wire of suitable gauge & pitch. The job includes engagement of skilled labour, use of insulated paper, PVC sleeves, bamboo sticks varnishing after rewinding and proper drying after. The job also includes testing of motor unit on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (45.79% of the total per job quoted/negotiated rates shall be allowed for this item.)

Cost on account of the disconnecting of the motor unit from the circuit & dismantling, to remove the damaged bearings on the DE/NDE to be replaced by the new ones. The job includes arranging of the bearing puller & all other necessary tools/tackles along with the greasing/lubrication as per site requirement. The job also includes assembling of the motor unit & testing on full load at site. (32.97% of the total quoted/negotiated rates per job shall be allowed for this item

Providing/Fitting of the Deep Groove Ball Bearings to be used on driving & non driving end of AC motors. Of size 6305 (21.24 % of the total quoted/negotiated rates per job shall be allowed for this item.

Total from item No 15 to 15.02

12.5HP/3P; Horizontal motor Cost on account of rewinding of the motor unit by way of using bare Copper wire of suitable gauge & pitch. The job includes engagement of skilled labour, use of insulated paper, PVC sleeves, bamboo sticks varnishing after rewinding and proper drying after. The job also includes testing of motor unit on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (36.06% of the total quoted/negotiated rates per job shall be allowed for this item.)

Cost on account of the disconnecting of the motor unit from the circuit & dismantling, to remove the damaged bearings on the DE/NDE to be replaced by the new ones. The job includes arranging of the bearing puller & all other necessary tools/tackles along with the greasing/lubrication as per site requirement. The job also includes assembling of the motor unit & testing on full load at site. (21.63% of the total quoted/negotiated rates per job shall be allowed for this item

Providing/Fitting of the Deep Groove Ball Bearings to be used on driving & non driving end of AC motors. Of size

6306 19.47% of the total quoted/Negotiated rates per job shall be allowed to the firm

6307 (22.84%) of the total quoted/Negotiated rates per job shall be allowed to the firm

Total from item 16.00 to 16.04

15HP/3P Horizontal motor Cost on account of rewinding of the motor unit by way of using bare Copper wire of suitable gauge & pitch. The job includes engagement of skilled labour, use of insulated paper, PVC sleeves, bamboo sticks varnishing after rewinding and proper drying after. The job also includes testing of motor unit on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (36.06% of the total quoted/negotiated rates per job shall be allowed for this item.)

Cost on account of the disconnecting of the motor unit from the circuit & dismantling, to remove the damaged bearings on the DE/NDE to be replaced by the new ones. The job includes arranging of the bearing puller & all other necessary tools/tackles along with the greasing/lubrication as per site requirement. The job also includes assembling of the motor unit & testing on full load at site. (21.63% of the total quoted/negotiated rates per job shall be allowed for this item

Providing/Fitting of the Deep Groove Ball Bearings to be used on driving & non driving end of AC motors. Of size

6306 (19.47) % of total quoted/negotiated rates per job shall be allowed to the firm

6307 (22.84%) of total quoted/negotiated rates per job shall be allowed to the firm

Total from item 17 to 17.04

17.5HP/3P Horizontal motor Cost on account of rewinding of the motor unit by way of using bare Copper wire of suitable gauge & pitch. The job includes engagement of skilled labour, use of insulated paper, PVC sleeves, bamboo sticks varnishing after rewinding and proper drying after. The job also includes testing of motor unit on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (42.92% of the total quoted/negotiated rates per job shall be allowed for this item.)

Cost on account of the disconnecting of the motor unit from the circuit & dismantling, to remove the damaged bearings on the DE/NDE to be replaced by the new ones. The job includes arranging of the bearing puller & all other necessary tools/tackles along with the greasing/lubrication as per site requirement. The job also includes assembling of the motor unit & testing on full load at site. (19.31% of the total quoted/negotiated rates per job shall be allowed for this item

Providing/Fitting of the Deep Groove Ball Bearings to be used on driving & non driving end of AC motors. Of size.

6306 (17.38%) of total quoted/negotiated rates per job shall be allowed to the firm

6307 (20.38%) of total quoted/negotiated rates per job shall be allowed to the firm

Total from Sl No 18 to 18.04

20HP/3P Horizontal motor Cost on account of rewinding of the motor unit by way of using bare Copper wire of suitable gauge & pitch. The job includes engagement of skilled labour, use of insulated paper, PVC sleeves, bamboo sticks varnishing after rewinding and proper drying after. The job also includes testing of motor unit on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (38.24% of the total quoted/negotiated rates per job shall be allowed for this item.)

Cost on account of the disconnecting of the motor unit from the circuit & dismantling, to remove the damaged bearings on the DE/NDE to be replaced by the new ones. The job includes arranging of the bearing puller & all other necessary tools/tackles along with the greasing/lubrication as per site requirement. The job also includes assembling of the motor unit & testing on full load at site. (17.21% of the total quoted/negotiated rates per job shall be allowed for this item

Providing/Fitting of the Deep Groove Ball Bearings to be used on driving & non driving end of AC motors of size

6307 (18.17%) of total quoted/negotiated rates per job shall be allowed to the firm

6308 (26.38%) of total quoted/negotiated rates per job shall be allowed to the firm

Total from SL No 19 to 19.04

25HP/3P Horizontal motor Cost on account of rewinding of the motor unit by way of using bare Copper wire of suitable gauge & pitch. The job includes engagement of skilled labour, use of insulated paper, PVC sleeves, bamboo sticks varnishing after rewinding and proper drying after. The job also includes testing of motor unit on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (35.82% of the total quoted/negotiated rates per job shall be allowed for this item.)

Cost on account of the disconnecting of the motor unit from the circuit & dismantling, to remove the damaged bearings on the DE/NDE to be replaced by the new ones. The job includes arranging of the bearing puller & all other necessary tools/tackles along with the greasing/lubrication as per site requirement. The job also includes assembling of the motor unit & testing on full load at site. (12.89% of the total quoted/negotiated rates per job shall be allowed for this item

Providing/Fitting of the Deep Groove Ball Bearings to be used on driving & non driving end of AC motors. of size.

6308 19.78% of total quoted/negotiated rates per job shall be allowed to the firm

6309 31.51% of total quoted/negotiated rates per job shall be allowed to the firm

Total from Sl no 20 to 20.04

40HP/3P Horizontal motor Cost on account of rewinding of the motor unit by way of using bare Copper wire of suitable gauge & pitch. The job includes engagement of skilled labour, use of insulated paper, PVC sleeves, bamboo sticks varnishing after rewinding and proper drying after. The job also includes testing of motor unit on full load at site. (The rates are inclusive of cost on account of deduction of the old scrap) (36.23% of the total quoted/negotiated rates per job shall be allowed for this item.)

Cost on account of the disconnecting of the motor unit from the circuit & dismantling, to remove the damaged bearings on the DE/NDE to be replaced by the new ones. The job includes arranging of the bearing puller & all other necessary tools/tackles along with the greasing/lubrication as per site requirement. The job also includes assembling of the motor unit & testing on full load at site. (13.04% of the total quoted/negotiated rates per job shall be allowed for this item

Providing/Fitting of the Deep Groove Ball Bearings to be used on driving & non driving end of AC motors. Of size 6312-2Z (50.73%) of the total quoted/negotiated rates per job shall be allowed for this item.

Total from Sl no 21 to 21.02

Repairs / replacements to MU-G Type FASD starters by way of;

P/F of terminal block for MU-G10/20 60 A- 03 way

P/F of terminal block for MU-G30/50 100A- 03 way

P/F of MU-1 relay 6-10A

P/F of MU-2 relay 13-21A

P/F of MU-2 relay 20-32A

P/F of MU-2 relay 24-38A

P/F of MU-2 relay 28-42A

P/F of MN- 5 relay 28-42A

P/F of MN- 5 relay 45-75A

P/F o1f analogue ammeter/ Voltmeter Assembly 0-30A/ 0-500V.

P/F of digital ammeter/ Voltmeter Assembly 0-60A/ 0-500V.

P/F of digital ammeter/Voltmeter Assembly 0-75A/0-500V.

P/F of timer Assembly ET – 100

P/F of SPPR Sz5

P/F of SPPR SDz5

P/F of the MU1 contactor Assembly

P/F of the MU1-H contactor Assembly

P/F of the MU 2 contactor Assembly

P/F of the MU-3 contactor Assembly

P/F of the ML- 2W contactor Assembly

P/F of the ML- 4W contactor Assembly

Repairs/ replacements to the ML-1.5 FASD Starter

Front housing & moving bridge kit for ML-1.5

ML-1.5 contactor Assembly ML-1.5

Standard operating coil for ML-1.5

Repairs/ replacements to the ML-2/3 FASD Starter

Front housing & moving bridge kit for ML2/3

ML-2 contactor Assy.

ML-3 contactor Assy.

Standard operating coil for ML-2/3

Spare kit without coil for ML-2

Spare kit without coil for ML-3

Moving contacts kit for ML-2/3

Repairs/ replacements to the ML-4 FASD Starter

Front housing & moving bridge kit for ML-4

ML-4 contactor Assy.

Standard operating coil for ML-4

Spare kit without coil

Repairs/Replacements & Complete Rewinding of 25 KVA Voltage Stabilizer;

Draining out the T Oil & Shifting of the stabilizer unit from site to workshop by way of employing private mechanical transport & back to site for checking the nature & magnitude of damage & shifting back to site after conducting the necessary repairs. Job includes engagement of skilled labours for loading/ unloading and arrangement of necessary handling tools. (16.85% of the total quoted/negotiated rates per job shall be allowed for this item.)

Dismantling of the stabilizer unit by way of drawing out the core/ coil assembly to access nature and magnitude of damage for conducting the necessary repairs & replacements to the coil legs. (5.62% of the total quoted/negotiated rates per job shall be allowed for this item.)

Making of new coil legs of size as per sample by way of rewinding copper strips of adequate size and specification. (The rates are inclusive of the cost on account of deduction of old scrap). (10.11% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Retaping of LT/HT coils after removing the old damaged tapings. (16.85% of the total quoted/negotiated rates per job shall be allowed for this item.)

Topping of T. Oil to the voltage stabilizer. – (1.69% of the total quoted/negotiated rates per ltr shall be allowed for this item.)

Providing/Fitting of the new Bush rods after replacement of the damaged ones. (5.62% of the total quoted/negotiated rates per job shall be allowed for this item.)

Replacement of the damaged Disc Type regulator/Rotary Switch. (39.33%) of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of the Brass Bush Rods of 12mm dia. (Heavy duty) (3.93% of the total quoted/negotiated rates per job shall be allowed for this item.)

Total from Sl No 26 to 26.08

Repairs/Replacements & Complete Rewinding of 40 KVA Voltage Stabilizer;

Draining out the T Oil & Shifting of the stabilizer unit from site to workshop by way of employing private mechanical transport & back to site for checking the nature & magnitude of damage & shifting back to site after conducting the necessary repairs. Job includes engagement of skilled labours for loading/ unloading and arrangement of necessary handling tools. (15.96% of the total quoted/negotiated rates per job shall be allowed for this item.)

Dismantling of the stabilizer unit by way of drawing out the core/ coil assembly to access nature and magnitude of damage for conducting the necessary repairs & replacements to the coil legs. (5.32% of the total quoted/negotiated rates per job shall be allowed for this item.)

Making of new coil legs of size as per sample by way of rewinding copper strips of adequate size and specification. (The rates are inclusive of the cost on account of deduction of old scrap). (9.57% of the total quoted/negotiated rates per Kg shall be allowed for this item.)

Retaping of LT/HT coils after removing the old damaged tapings. (21.28% of the total quoted/negotiated rates Per job shall be allowed for this item.)

Topping of T. Oil to the voltage stabilizer. – (1.60% of the total quoted/negotiated rates per ltr shall be allowed for this item.)

Providing/Fitting of the new Bush rods after replacement of the damaged ones. (5.32% of the total quoted/negotiated rates per job shall be allowed for this item.)

Replacement of the damaged Disc Type regulator/Rotary Switch. (37.23% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of the Brass Bush Rods of 12mm dia. (Heavy duty) (3.72% of the total quoted/negotiated rates per job shall be allowed for this item.)

Total from 27 to 27.08

Repairs/Replacements & Complete Rewinding of 50 KVA Voltage Stabilizer;

Draining out the T Oil & Shifting of the stabilizer unit from site to workshop by way of employing private mechanical transport & back to site for checking the nature & magnitude of damage & shifting back to site after conducting the necessary repairs. Job includes engagement of skilled labours for loading/ unloading and arrangement of necessary handling tools. (15.52% of the total quoted/negotiated rates per job shall be allowed for this item.)

Dismantling of the stabilizer unit by way of drawing out the core/ coil assembly to access nature and magnitude of damage for conducting the necessary repairs & replacements to the coil legs. (6.47% of the total quoted/negotiated rates per job shall be allowed for this item.)

Making of new coil legs of size as per sample by way of rewinding Aluminum strips of adequate size and specification. (The rates are inclusive of the cost on account of deduction of old scrap). (3.45% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Making of new coil legs of size as per sample by way of rewinding copper strips of adequate size and specification. (The rates are inclusive of the cost on account of deduction of old scrap). (7.76% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Retaping of LT/HT coils after removing the old damaged tapings. (19.40% of the total quoted/negotiated rates per job shall be allowed for this item.)

Topping of T. Oil to the voltage stabilizer. (1.29% of the total quoted/negotiated rates per ltr shall be allowed for this item.)

Providing/Fitting of the new Bush rods after replacement of the damaged ones. (4.31% of the total quoted/negotiated rates per job shall be allowed for this item.)

Replacement of the damaged regulator/Rotary Switch Plate type (9”x9”) size as per sample. (38.79% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of the Brass Bush Rods of 12mm dia. (Heavy duty) (3.01% of the total quoted/negotiated rates per job shall be allowed for this item.)

Total from Sl No 28 to 28.09

Repairs/Replacements & Complete Rewinding of 75 KVA Voltage Stabilizer;

Draining out the T Oil & Shifting of the stabilizer unit from site to workshop by way of employing private mechanical transport & back to site for checking the nature & magnitude of damage & shifting back to site after conducting the necessary repairs. Job includes engagement of skilled labours for loading/ unloading and arrangement of necessary handling tools. (13.21% of the total quoted/negotiated rates per job shall be allowed for this item.)

Dismantling of the stabilizer unit by way of drawing out the core/ coil assembly to access nature and magnitude of damage for conducting the necessary repairs & replacements to the coil legs. (6.60% of the total quoted/negotiated rates per job shall be allowed for this item.)

Making of new coil legs of size as per sample by way of rewinding copper strips of adequate size and specification. (The rates are inclusive of the cost on account of deduction of old scrap). (5.94% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Retaping of LT/HT coils after removing the old damaged tapings. (24.75% of the total quoted/negotiated rates per job shall be allowed for this item.)

Topping of T. Oil to the voltage stabilizer. (0.99% of the total quoted/negotiated rates per ltr shall be allowed for this item.)

Providing/Fitting of the new Bush rods after replacement of the damaged ones. (3.30% of the total quoted/negotiated rates per job shall be allowed for this item.)

Replacement of the damaged Regulator/Rotary Switch, Plate type (12”x12”) as per sample. (42.90% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of the Brass Bush Rods of 12mm dia. (Heavy duty) (2.31% of the total quoted/negotiated rates per job shall be allowed for this item.)

Total from Sl 29 to 29.08

Repairs/Replacements & Complete Rewinding of 100 KVA Voltage Stabilizer;

Draining out the T Oil & Shifting of the stabilizer unit from site to workshop by way of employing private mechanical transport & back to site for checking the nature & magnitude of damage & shifting back to site after conducting the necessary repairs. Job includes engagement of skilled labours for loading/ unloading and arrangement of necessary handling tools. (13.97% of the total quoted/negotiated rates per job shall be allowed for this item.)

Dismantling of the stabilizer unit by way of drawing out the core/ coil assembly to access nature and magnitude of damage for conducting the necessary repairs & replacements to the coil legs. (8.38% of the total quoted/negotiated rates per job shall be allowed for this item.)

Making of new coil legs of size as per sample by way of rewinding copper strips of adequate size and specification. (The rates are inclusive of the cost on account of deduction of old scrap). (5.03% of the total quoted/negotiated rates Per Kg shall be allowed for this item.)

Retaping of LT/HT coils after removing the old damaged tapings. (30.73% of the total quoted/negotiated rates per job shall be allowed for this item.)

Topping of T. Oil to the voltage stabilizer. - (0.84% of the total quoted/negotiated rates Per ltr shall be allowed for this item.)

Providing/Fitting of the new Bush rods after replacement of the damaged ones. (2.79% of the total quoted/negotiated rates per job shall be allowed for this item.)

Replacement of the damaged Regulator/Rotary Switch, Plate type (12”x12”)/(18'x18') as per sample. (36.31% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of the Brass Bush Rods of 12mm dia. (Heavy duty) (1.95 % of the total quoted/negotiated rates per job shall be allowed for this item.)

Total from 30 to 30.08

Repairs/ Replacements of the 25KVA HT transformers

Disconnecting the HT transformer from the HT/ LT line. Shifting to the workshop for inspection and shifting back to site, reconnecting to the HT/LT line after carrying out necessary repairs, testing and commissioning on no load and full load at site. Job includes opening the transformer, draining out the T- oil, lifting out core/ coil assembly for inspection purpose. Job includes arrangement of all kinds of tools tackles, skilled labours for safe loading/ unloading and vehicle for transportation. (25.29% of the total quoted/negotiated rates per job shall be allowed for this item.)

Complete rewinding of LT coil legs as per the existing parameters, out of Aluminum strip as per sample. (The rates are inclusive of the cost on account of deduction of old scrap). (5.06% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Rewinding of H.T. Aluminum coils as per the existing parameters after dismantling of damaged one. (The rates are inclusive of the cost on account of deduction of old scrap) (5.06% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Reconditioning of the LV Coil Leg. (3.16% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Cost on account of heat treatment to the transformer by placing in specially designed electric oven in order to remove the moisture, if any, (22.76% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Manufacturing of the Level-2 CRGO Core -1kg (5.69% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Providing/Filling of fresh T Oil – (1.90% of the total quoted/negotiated rates per ltr shall be allowed for this item.)

Filtration/dehydration of Old T Oil –(0.23% of the total quoted/negotiated rates per ltr shall be allowed for this item.)

Providing/Fixing of the 11KVA Pin Insulators. - (6.32% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fixing of the 11KVA Disc Insulators (10.75% of the total quoted/negotiated rates pr job shall be allowed for this item.)

Providing/Fitting of LT Brass Bush Rods 12mm Dia. (Heavy Duty) (3.79% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of HT Brass Bush Rods 12mm Dia. (Heavy Duty) (4.43% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of H V Bushing (3.41% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of L V Bushing (2.15% of the total quoted/negotiated rates per job shall be allowed for this item.)

Total work from 31 to 31.14

Repairs/ Replacements of the 63KVA HT transformers

Disconnecting the HT transformer from the HT/ LT line. Shifting to the workshop for inspection and shifting back to site, reconnecting to the HT/LT line after carrying out necessary repairs, testing and commissioning on no load and full load at site. Job includes opening the transformer, draining out the T- oil, lifting out core/ coil assembly for inspection purpose. Job includes arrangement of all kinds of tools tackles, skilled labours for safe loading/ unloading and vehicle for transportation. (30.74% of the total quoted/negotiated rates per job shall be allowed for this item.)

Complete rewinding of LT coil legs as per the existing parameters, out of Aluminum strip as per sample. (The rates are inclusive of the cost on account of deduction of old scrap). (4.10% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Rewinding of H.T. Aluminum coils as per the existing parameters after dismantling of damaged one. (The rates are inclusive of the cost on account of deduction of old scrap) (4.10% of the total quoted/negotiated rates Per Kg shall be allowed for this item.)

Reconditioning of the LV Coil Leg. (2.56% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Cost on account of heat treatment to the transformer by placing in specially designed electric oven in order to remove the moisture, if any, (18.45% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Manufacturing of the Level-2 CRGO Core (4.61% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Providing/Filling of fresh T Oil- (1.54% of the total quoted/negotiated rates per ltr shall be allowed for this item.)

Filtration/dehydration of Old T Oil - (0.18% of the total quoted/negotiated rates per ltr shall be allowed for this item.)

Providing/Fixing of the 11KVA Pin Insulators. (5.12% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fixing of the 11KVA Disc Insulators. (8.71% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of LT Brass Bush Rods 12mm Dia. (Heavy Duty) (3.09% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of LT Brass Bush Rods 20mm Dia. (Heavy Duty) (8.71% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of HT Brass Bush Rods 12mm Dia. (Heavy Duty) (3.58% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of H V Bushing (2.77% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of L V Bushing (1.74% of the total quoted/negotiated rates per job shall be allowed for this item.)

Total work from 32 to 32.15

Repairs/ Replacements of the 100 KVA HT transformers

Disconnecting the HT transformer from the HT/ LT line. Shifting to the workshop for inspection and shifting back to site, reconnecting to the HT/LT line after carrying out necessary repairs, testing and commissioning on no load and full load at site. Job includes opening the transformer, draining out the T- oil, lifting out core/ coil assembly for inspection purpose. Job includes arrangement of all kinds of tools tackles, skilled labours for safe loading/ unloading and vehicle for transportation. (37.63% of the total quoted/negotiated rates per job shall be allowed for this item.)

Complete rewinding of LT coil legs as per the existing parameters, out of Aluminum strip as per sample. (The rates are inclusive of the cost on account of deduction of old scrap). (3.35% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Rewinding of H.T. Aluminum coils as per the existing parameters after dismantling of damaged one. (The rates are inclusive of the cost on account of deduction of old scrap) (3.35% of the total quoted/negotiated rates Per Kg shall be allowed for this item.)

Reconditioning of the LV Coil Leg. (2.09% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Cost on account of heat treatment to the transformer by placing in specially designed electric oven in order to remove the moisture, if any, (20.91% of the total quoted/negotiated rates shall be per job allowed for this item.)

Providing/Manufacturing of the Level-2 CRGO Core (3.76% of the total quoted/negotiated rates per Kg shall be allowed for this item.)

Providing/Filling of fresh T Oil - (1.25% of the total quoted/negotiated rates per ltr shall be allowed for this item.)

Filtration/dehydration of Old T Oil – (0.15% of the total quoted/negotiated rates per ltr shall be allowed for this item.)

Providing/Fixing of the 11KVA Pin Insulators. (4.18% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fixing of the 11KVA Disc Insulators. (7.11% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of LT Brass Bush Rods 12mm Dia. (Heavy Duty) (2.51% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of LT Brass Bush Rods 20mm Dia. (Heavy Duty) (7.11% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of HT Brass Bush Rods 12mm Dia. (Heavy Duty) (2.93% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of H V Bushing (2.25% of the total quoted/negotiated rates per jobs hall be allowed for this item.)

Providing/Fitting of L V Bushing (1.42% of the total quoted/negotiated rates per job shall be allowed for this item.)

Total from Sl No 33. to 33.15

Repairs/ Replacements of the 250 KVA HT transformers

Disconnecting the HT transformer from the HT/ LT line. Shifting to the workshop for inspection and shifting back to site, reconnecting to the HT/LT line after carrying out necessary repairs, testing and commissioning on no load and full load at site. Job includes opening the transformer, draining out the T- oil, lifting out core/ coil assembly for inspection purpose. Job includes arrangement of all kinds of tools tackles, skilled labours for safe loading/ unloading and vehicle for transportation. – (40.13% of the total quoted/negotiated rates per job shall be allowed for this item.)

Complete rewinding of LT coil legs as per the existing parameters, out of Aluminum strip as per sample. (The rates are inclusive of the cost on account of deduction of old scrap). (3.21% of the total quoted/negotiated rates Per kg shall be allowed for this item.)

Rewinding of H.T. Aluminum coils as per the existing parameters after dismantling of damaged one. (The rates are inclusive of the cost on account of deduction of old scrap) (3.21% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Reconditioning of the LV Coil Leg. (2.01% of the total quoted/negotiated rates shall be all Per kg allowed for this item.)

Cost on account of heat treatment to the transformer by placing in specially designed electric oven in order to remove the moisture, if any, (20.07% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Manufacturing of the Level-2 CRGO Core (3.61% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Providing/Filling of fresh T Oil – (1.20% of the total quoted/negotiated rates per ltr shall be allowed for this item.)

Filtration/dehydration of Old T Oil- (0.14% of the total quoted/negotiated rates per ltr shall be allowed for this item.)

Providing/Fixing of the 11KVA Pin Insulators. (4.01% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fixing of the 11KVA Disc Insulators. (6.82% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of LT Brass Bush Rods 12mm Dia. (Heavy Duty) (2.41% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of LT Brass Bush Rods 20mm Dia. (Heavy Duty) (6.84% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of HT Brass Bush Rods 12mm Dia. (Heavy Duty) (2.81% of the total quoted/negotiated rates pr job shall be allowed for this item.)

Providing/Fitting of H V Bushing per job (2.17% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of L V Bushing (1.36% of the total quoted/negotiated rates per job shall be allowed for this item.)

Total work from 34 TO 34.15

Repairs/ Replacements of the 400 KVA HT transformers

Disconnecting the HT transformer from the HT/ LT line. Shifting to the workshop for inspection and shifting back to site, reconnecting to the HT/LT line after carrying out necessary repairs, testing and commissioning on no load and full load at site. Job includes opening the transformer, draining out the T- oil, lifting out core/ coil assembly for inspection purpose. Job includes arrangement of all kinds of tools tackles, skilled labours for safe loading/ unloading and vehicle for transportation. (42.05% of the total quoted/negotiated rates per job shall be allowed for this item.)

Complete rewinding of LT coil legs as per the existing parameters, out of Copper Strip as per sample. (The rates are inclusive of the cost on account of deduction of old scrap). (5.82% of the total quoted/negotiated rates Per kg shall be allowed for this item.)

Rewinding of H.T. Copper coils as per the existing parameters after dismantling of damaged one. (The rates are inclusive of the cost on account of deduction of old scrap) (5.82% of the total quoted/negotiated rates Per kg shall be allowed for this item.)

Reconditioning of the LV Coil Leg. (1.62% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Cost on account of heat treatment to the transformer by placing in specially designed electric oven in order to remove the moisture, if any (19.41% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Manufacturing of the Level-2 CRGO Core - (2.91% of the total quoted/negotiated rates per kg shall be allowed for this item.)

Providing/Filling of fresh T Oil (0.97% of the total quoted/negotiated rates per ltr shall be allowed for this item.)

Filtration/dehydration of Old T Oil - (0.12% of the total quoted/negotiated rates per ltr shall be allowed for this item.)

Providing/Fixing of the 11KVA Pin Insulators. - (3.23% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fixing of the 11KVA Disc Insulators. (5.50% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of LT Brass Bush Rods 12mm Dia. (Heavy Duty) (1.94% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of LT Brass Bush Rods 20mm Dia. (Heavy Duty) (5.50% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of HT Brass Bush Rods 12mm Dia. (Heavy Duty) (2.26% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of H V Bushing (1.75% of the total quoted/negotiated rates per job shall be allowed for this item.)

Providing/Fitting of L V Bushing (1.10% of the total quoted/negotiated rates per job shall be allowed for this item.)

Total from Sl No 35 to 35.15

Providing/Fixing of the ISMC-75 Slopping Flange Channel

Providing/Fixing of the ISMC-100 Slopping Flange Channel

Providing/Fitting of 11KVA Link Set (Heavy Duty)

Providing/Fitting of 11KVA Drop-out Set (Heavy Duty)

Providing/Fixing of the ISMC-75 Slopping Flange Channel

Providing/Fixing of the ISMC-100 Slopping Flange Channel

Aluminum/Copper Thimbles;

Providing/Fixing of the 25mm2 Aluminum Thimbles;

Providing/Fixing of the 35mm2 Aluminum Thimbles;

Providing/Fixing of the 50mm2 Aluminum Thimbles;

Providing/Fixing of the 70mm2 Aluminum Thimbles;

Providing/Fixing of the 95mm2 Aluminum Thimbles;

Providing/Fixing of the 120mm2 Aluminum Thimbles;

Providing/Fixing of the 25mm2 Copper Thimbles;

Providing/Fixing of the 35mm2 Copper Thimbles;

Providing/Fixing of the 50mm2 Copper Thimbles;

Providing/Fixing of the 70mm2 Copper Thimbles;

Providing/Fixing of the 95mm2 Copper Thimbles;

Providing/Fixing of the 120mm2 Copper Thimbles;

Providing/Fixing of the 240mm2 Copper Thimbles;

Providing and fitting of various electrical Gadgets

P/F/I/T & Successful commissioning of the MU-G type fully automatic Star-Delta starter in sheet steel enclosure capable of working on AC-3 duty, 415V/50Hz 3phase maximum motor load having Maximum compatible relay range with required contactors conforming to IS/IEC-60947-4-1 & IEC-60947-4-1 with overload, single phasing, phase reversal & phase imbalance protections in vibrations proof enclosure with IP-54 protection class. The unit should be fitted with ON/OFF, voltage & Ampere indications compatible with M-Power. The job includes its fitment on panel board in suitable size PVC sheathed copper wire of Havells/Polycab Make along with P/F of copper thimbles as per site requirement.

Providing/Fitting/installation & testing of 3P/4P of suitable capacity Manual off load COS (L&T/ABB/ Schneider) Make, side handle operated capable of operating on 415V,50Hz conforming to IS/60947-1&3 in sheet steel enclosure to be fitted on the panel board in 16mm2pvc sheathed copper wire of Havells/Polycab Make.

P/I/T/Commissioning of MCCBs (3 Pole) of L&T/D-Sine or Equivalent in other makes of ABB/Schneider in SKB-3 frame size with adjustable thermal & magnetic settings having breaking capacity of 25-36 ka at 415V, conforming to IS; 13747-ii & IEC-60947 to be fitted on the panel board. The job includes its terminal separators & wiring in suitable capacity PVC sheathed copper wire along with suitable size Copper/Aluminum thimbles with duly crimping with the crimping tool for proper fitment.

50-63 Amp breaking Capacity 25KA

63-80 Amp breaking Capacity 25KA

80-100 Amp breaking Capacity 25KA

100-125 Amp breaking Capacity 25KA

125-160 Amp breaking Capacity 25KA

160-200 Amp breaking Capacity 25KA

200-250 Amp breaking Capacity 25KA

80-100 Amp braking Capacity 36KA

100-125 Amp braking Capacity 36KA

125-160 Amp braking Capacity 36KA

160-200 Amp braking Capacity 36KA

200-250 Amp braking Capacity 36KA

Cost on account of Providing/Fitting of Flat Two/Three Core PVC Insulated & PVC Sheathed industrial copper cable for Submersible pump motors, 1100 Volts, conforming to IS;69

1.5mm2 2 Core

2.5 mm2 2 core

4.0 mm2 2 Core

1.5mm2 3 Core

2.5 mm2 3 core

4.0 mm2 3 Core

6.0 mm2 3 Core

10 mm2 3 Core

16 mm2 3 Core

25 mm2 3 Core

Cost on account of Providing/Fitting of 3/3.5 Core XLPE Insulated, PVC Sheathed multicore Aluminum Armored cable 650/1100V grade, conforming to IS; 7098 (Part 1) 1988 of Havells/Polycab make.

10 mm2 2 Core

16 mm2 2 Core

25 mm2 2 Core

25 mm2 3 core

35 mm2 3 core

50 mm2 3 Core

70 mm2 3 Core

25 mm2 3.5 Core

35 mm2 3.5 Core

50 mm2 3.5 Core

70 mm2 3.5 Core

Cost on account of Providing/Fitting of the single core HRFR insulated industrial Grade Copper Conductor (Unsheathed) Flexible cable 1100V; Conforming to IS;694

Providing of the 11Watt Led Electrical bulbs capable of operating on 220V/50HZ of Philips/Havells/GM Make only

Providing of the 15Watt Led Electrical bulbs capable of operating on 220V/50HZ of Philips/Havells/GM Make only

Providing of the 24Watt Led Electrical bulbs capable of operating on 220V/50HZ of Philips/Havells/GM Make only

Providing/Fitting of the 15A 3 Pin Sockets of Anchor/SSK/GM Make Only

Providing/Fitting of Analogue Ammeter of 0-30A capable of operating on 220V/50HZ of AE/Rishabh Make only

Providing/Fitting of Analogue Ammeter of 0-50A capable of operating on 220V/50HZ of AE/Rishabh Make only

Providing/Fitting of Analogue Ammeter of 0-60A capable of operating on 220V/50HZ of AE/Rishabh Make only

Providing/Fitting of Analogue Ammeter of 0-100A capable of operating on 220V/50HZof AE/Rishabh Make only

Providing/Fitting of the Voltmeter of 0-500V capable of operating on 220V/50HZ of AE/Rishabh Make only.

Providing of Long Focus Rechargeable water proof flash light Search Light. Of following Specifications; Model; Portable Torch Light, Power in watts: Not less than 50 Watts, Battery type: rechargeable.

Providing of the Hot Air Blower/Heat Convertor capable of operating on 220V/50HZ with built in auto thermal cut off of reputed make

Providing/Fixing of the 1200mm Swap ceiling Fan capable of operating on 220V/50HZ of Bajaj/Usha/Surya Make

Bahir Brothers

M/s ASIAN ELECTRICAL AND MECHANICAL WORKS

M/s ASIAN ELECTRICAL AND MECHANICAL WORKS

Bahir Brothers