Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹5.1 LAdmitted-Finance | -20.00% | ₹5.1 L | L1 | Admitted-Finance |
| 2 | L1₹5.1 LAdmitted-Finance | -20.00% | ₹5.1 L | L1 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | - | Rejected-Technical ARN details blank |
Tender Value
₹6.4 L
EMD Value
₹12,850
Closing Date
30 Mar 2026, 3:00 pmClosed
EXECUTIVE ENGINEER,DIV.XXIII(R)
Bicholim Goa
Construction of road in Madhalawada, salem in V.P. Salem in Bicholim constituency of Bicholim Taluka.(MLA-LAD)
2026_PWD_28352_1
PWD/WDXXIII/ASW/25-26/F10/17/1
Open Tender
Civil Works - Roads
30 days
Bicholim Goa
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
₹12,850
2 Apr 2026
24 Mar 2026
1 Apr 2026
24 Mar 2026
30 Mar 2026
24 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 metres (average lead 50 metres), including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.as per MORTH Specification 301 | |||||
| 2Supplying of granitic or basaltic stone soling of size 15-20 cm and Murrum having P.I. Value not more than 6 and laying including packing with smaller stones and consolidation with power roller including spreading waters and consolidation of binding material etc. complete.(Measurements shall be considered on finished item.and and layer of WBM of 50/75mm thick shall be taken seperately over this sub-base to obtain smooth surface, as per the directives of Engineer in-charge). | |||||
| 3Providing and laying 50mm(consolidated thickness)full grout using granitic or basaltic stone of specified grading at 6.00 cu.m. per 100 sq.m. grouting with hot bitumen straight run bitumen(or with such bituminous material of grade and type as specified by the Engineer-in-Charge)at 5.0kg. per sq. m. binding with key aggregate of granitic or basaltic stone of specified grading at 1.5 cu.m. per 100 sq.m. including Providing and laying seal coat sealing the voids in a bituminious surface laid with F.E loader with 1 Cu.m. bucket capacity to the specified levels, grade and cross fall using Type A seal coat with 0.98 kg/sqm of bitumen of grade as per MoRT&H specifications clause 513. | |||||
| 4Providing and applying tack coat with bitumen grade of 80/100 or bitumen emulsion using pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRT&H specifications clause 503;Bitumen 80/100 @ 0.20 kg/sq.m | |||||
| 5Providing and laying bituminious concrete with 40-60 TPH Drum Mix type Hhot mix plant producing an average output of 50 tonnes per hour using crushed aggregates of specified grading, premixed with bituminious binder to mix with filler, transporting the hotmix to work site, with all leads laying with a Mechanical paver finisher to the required grade, level and alignment, using antistripping agent rolling with smooth wheeled, vibratory or tandem rollers to achieve the desired compaction complete as per MoRT&H Specifications Clause 509;Grade-II (13mm nominal size) @ 6.0% Bitumen of grade 60/70;Antistripping agent @ 0.5% of bitumen content. | |||||
| 6Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge; (To be procured through GHRSSIDC & PAYMENT shall be released on submission of invoices);Size 900 x 400 x 100 mm with steel reinforcement not less than 5.0 kgs per unit -12 T capacity | |||||
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.17 MB
Tendernotice_2.pdf
PDF • 0.79 MB
Tendernotice_3.pdf
PDF • 0.49 MB
BOQ_28795.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid