Loading…
Loading…
Tender Value
₹3.6 Cr
EMD Value
₹7.3 L
Closing Date
10 Sept 2026, 11:30 am
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
45 days
Expenditure
Capital (Works)
WORKS
25 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover o f V/N crores; where V= Advertised value of the tender in crores of Rupees and N= Number of years prescribed for completion of work for which bids have been invited.The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.The tenderers shall submit requisite information as per Annexure-VIB, long with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) Attested Certificates(s) issued by Executive or Nominated Authorityof the government Departments or Semi-Government/Public SectorUndertakings for the value of the work done for them during thequalifying period including current financial year certifying the billamounts paid Agreement-wise and Date-wise or attested photo copy ofsuch certificate. Such certificates will be accepted only from Govt. /Govt. bodies / PSUs authorities. Certificates issued by Private Bodieswill not be considered.
NOTE: (i) Financial Year shall normally, be reckoned as 1st April to 31st March of the Next Year. However, for Turnover Criteria, the Financial Year as applicable to the Company /Tenderer is to be considered, if it defers from the above. (ii) Current Financial year is reckoned as the incomplete Financial year in which the date of tender submission falls. (iii) Chartered Accountant statements duly indicating yearly receipts will not be considered until and unless backed by Audited Balance Sheets or Provisional Balance sheet. (iv) (v) If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.
If JV firms are allowed to participate; Financial eligibility of the JV Firm shall be adjudged based on satisfactory fulfillment of the Para No.17.15.2 of J.V guide lines of IRSGCC April - 2022 [with up to date correction slip].
Under schedule -A , Sl. No :09 of DSR-2023 item Code: 5.33.1.3 "Concrete of M55 grade with minimum cement content of 370 kg /cum" to be read as "Concrete of M35 grade with minimum cement content of 370 kg /cum"
71 conditions · 3 needing a document upload
TENDER SHALL BE REJECTED if it is not accompanied by the following
In case of tender for Ballast supply - Ballast test certificate
Bid Security deposited through IREPS e-payment or as per provisions under Clause 5 (2) Part-I of GCC April 2022.
In case of Partnership firm: The tender form shall be submitted only in the name of partnership firm.
In case tenderer is JV Firm : The tender form shall be submitted 1.2.2 only in the name of the JV and not in the name of any constituent member.
Uploading of Certificate in support of Technical Eligibility (No Technical credentials are required for tenders having advertised value up to Rs 50 lakh).
Submission of Certificate(s) in support of Financial Eligibility (No Financial credentials are required for tenders having advertised value up to Rs 50 lakh).
IN CASE THE TENDER is Partnership firm/ JOINT Venture firm (JV)/ LLP A copy of certificate to be submitted/uploaded by tenderer as per format given at annexure -v of IRGCC 2022.
IN CASE OF ADVERTISED TENDER VALUE IS MORE THAN RS. 10 CRORES:Bid capacity is applicable, the tenderers should submit proforma attached in DOCUMENTS. In case, the tenderer/s failed to upload BID CAPACITY PROFORMA along with offer, their/his offer shall be considered as incomplete and will be rejected summarily.
In case tenderer is other than sole proprietorship firm, following documents shall be uploaded by the tenderer:
In case the Tenderer is a Partnership Firm: [i] A notarized copy of Partnership deed or a copy of the Partnership deed registered with the Registrar. [ii] A notarized or registered Power of Attorney (duly registered as per prevailing law) in favour of an 1.7.1 individual to sign the tender documents and create liability against the Firm. [iii] PAN / TAN number of Partnership firm (PAN / TAN number in the name of any of the constituent partners shall not be considered). [iv] All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
In case the Tenderer is a LLP Firm registered under LLP Act-2008 (i) A copy of LLP Agreement, (ii) A copy of Certificate of Incorporation; and (iii) A copy of Power of Attorney/Authorization issued by the LLP Firm in favour of the individual to sign the 1.7.2 tender on behalf of the LLP Firm and create liability against the Firm. (iv) Copy of PAN number of the LLP Firm. [v] All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
In case the Tenderer is a Company registered under Companies Act-2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of 1.7.3 Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv) copy of PAN number of the Company. and (v) All other documents in terms Para 10 of the Tender Form (Second Sheet) above
In case the Tenderer is a Registered Society & Registered Trust: (i) A copy of the Certificate of Registration. (ii) A copy of Memorandum of Association of Society/Trust Deed; (iii) A copy of Power of Attorney in favour of the individual to sign the tender 1.7.4 documents and create liability against the Society/Trust. And (iv) A copy of Rules and Regulations of the society (v) Copy of PAN number of the Society/Trust. (vi) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.
Incase JV Firms are allowed to participate: Uploading of MEMORANDUM OF UNDERSTANDING as per the format given in "Documents attached with tender" and also below documents
In case one or more members is/are Proprietary Firm or HUF, the following documents shall be enclosed: (i) A copy of notarized affidavit on Stamp Paper declaring that his/her Concern is a 1.8.1 Proprietary Concern and he/she is sole proprietor of the Concern OR he/she is in position of "KARTA" of Hindu Undivided Family (HUF) and he/she has the authority, power and consent given by other partners to act on behalf of HUF.
In case one or more of the members of the JV is/are partnership firm(s), following documents shall be submitted: (i) A notarized copy of the Partnership Deed or a copy of the partnership deed registered with the Registrar. (ii)A copy of consent of all the 1.8.2 partners or individual authorized by partnership firm, to enter into the Joint Venture Agreement on a stamp paper. (iii) A notarized or registered copy of Power of Attorney in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm.
In case one or more members of the JV is/are companies, the following documents shall be submitted: (i) A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement. (ii) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company. 1.8.3 (iii) A copy of Certificate of Incorporation. (iv) A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company
In case one or more members of the JV is/are LLP firm/s, the following documents shall be submitted: (i) A copy of LLP Agreement. (ii) A copy of Certificate of Incorporation of LLP. (iii) A copy of resolution passed by partners of LLP firm, permitting 1.8.4 the Firm to enter into a JV agreement. (iv) A copy of Authorization /copy of Power of Attorney issued by the LLP firm (backed by resolution passed by the Partners) in favour of the individual, to sign the tender and/or sign the MOU/ JV agreement on behalf of the LLP and create liability against the LLP.
In case one or more members of the JV is/are Society/s or Trust/s, the following documents shall be submitted: (i) A copy of Certificate of Registration. (ii) A copy of Memorandum of 1.8.5 Association of Society/Trust Deed. (iii) A copy of Rules & Regulations of the Society. (iv) A copy of Power of Attorney, in favour of the individual to sign the tender documents and create liability against the Society/Trust
Uploading of Declaration regarding Employment of Retired Engineer/Retired Railway Officer as per clause no.16 of Part-I of GCC April 2022. [in the format attached in - Documents]
Uploading of NEFT FORM - as per the format attached with the tender document.
The list of personnel / organization on hand and proposed to be engaged for the tendered work.
List of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work.
Uploading of Statement Showing the particulars of Works on Hand & Works Completed as per the format attached to the tender document
Uploading of certificate by local suppliers in regard to meeting the Minimum Local Content requirement to avail benefits under Public Procurement Policy Order-2017, as amended from time to time, shall be followed for consideration of tenders (A) for procurement order of value less than Rs. 10 crores: self- certificate in accordance with Para-9(a) of Public Procurement(Preference to Make in India) Order 2017. (B)For Procurement Order of value more than Rs. 10 crores, the certificate from Statutory auditor/cost auditor/practicing CA as the case may be in accordance with Para-9(b) of Public Procurement (Preference to Make in India) Order 2017.
Proforma-16 for self-certificate in regard to meeting theMinimum Local Content requirements as per Make in India Policyfor Procurement order value less than of Rs. 10 Crores. ORProforma- 17 for Certificate from the statutory auditor or costauditor of the company (in the case of companies) or from apracticing cost accountant or practicing chartered accountant(in respect of suppliers other than companies) giving thepercentage of Local Content as per Make in India Policy forProcurement Order Value more than Rs.10 Crores. Provisions ofMake in India Policy 2017 (revised during 2024 vide Departmentfor Promotion of Industry and Trade, Ministry of Commerce andIndustry's letter No. P- 45021/2/2017-PP (BE-II)-Part(4)Vol.IIdated 19.07.2024) issued by Govt. of India, as amended fromtime to time, shall be followed for consideration of tenders
Uploading of Proforma -18 attached with Tender document (Certificate signed by Tenderer and Chartered Accountant),when balance sheet for the first previous year is yet to be prepared/ audited
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
(i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii) documents shall be submitted according to clause 14 of IRGCC 2022:
Construction of Retaining wall and Compound wall in the extension area of Workshop at East End at UBLS. [Maintenance period of 02 (TWO) years].
07-XEN-WS-UBLS-RW-R1-2026~SWR
07-XEN-WS-UBLS-RW-R1-2026
Open
Works - General
10 Months
Dharwad, Karnataka
₹0
₹7.3 L
19 Aug 2026
19 Aug 2026
27 Aug 2026
19 items across 1 schedule · ₹5,21,27,342.5 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | cum | 95 | 494.1 | 46,939.5 |
| 2 | All kinds of soil | cum | 1630 | 177.5 | 2,89,325 |
| 3 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 330 | 7,294.7 | 24,07,251 |
| 4 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 1650 | 392.15 | 6,47,047.5 |
| 5 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 900 | 736.4 | 6,62,760 |
| 6 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 1550 | 961.3 | 14,90,015 |
| 7 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 98550 | 107.85 | 1,06,28,617.5 |
| 8 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 76500 | 107.85 | 82,50,525 |
| 9 | Concrete of M55 grade with minimum cement content of 370 kg /cum | cum | 1095 | 9,806.7 | 1,07,38,336.5 |
| 10 | Concrete of M35 grade with minimum cement content of 370 kg /cum | cum | 850 | 10,162.35 | 86,37,997.5 |
| 11 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 460 | 9,344.35 | 42,98,401 |
| 12 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 3800 | 172.6 | 6,55,880 |
| 13 | 1:4 (1 cement: 4 fine sand) | Sqm | 6400 | 347.05 | 22,21,120 |
| 14 | One coat | Sqm | 6400 | 95.45 | 6,10,880 |
| 15 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 35 | 2,434.25 | 85,198.75 |
| 16 | In cement mortar | cum | 25 | 2,060.2 | 51,505 |
| 17 | In cement mortar | cum | 35 | 2,458.95 | 86,063.25 |
| 18 | With G.I. barbed wire | Metre | 800 | 22.1 | 17,680 |
| 19 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. | Kg | 2400 | 125.75 | 3,01,800 |
| Schedule total | ₹5,21,27,342.5 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
AnnexureVGCCcorrespondence.pdf ANNEXUREV
ATTACHMENT
JPOCirculardated22.05.2024.pdf
ATTACHMENT
NEFTFORM.pdf
ATTACHMENT
PROFORM1617.pdf
ATTACHMENT
IRGCCApril2022newasperACS1.pdf IRGCC April 2022 New as per ACS
ATTACHMENT
ACSItoXI_compressed1.pdf
ATTACHMENT
EnggTenderConditionsR1.pdf
ATTACHMENT
Schedule-AR1.pdf
ATTACHMENT
IRGCCApril2022newasperACS1.pdf
ATTACHMENT
AnnexureVGCCcorrespondence.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].