8329/E8

Amount

Demolition of Cement concrete ( Unreinforced) in ground floor and pavings n.exc 15 Cm thick below or above Ground Level complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges and keeping serviceable sheets in safe custody for reuse in the work complete as directed.

Materials and Labour Drilling and plugging holes of 12mm dia @ 300mm centre to centre to a depth of at-least 300mm and up to 600mm injecting chemical emulsion chlorpyriphos 20% EC or equivalent @2.25 Ltr. per linear metre for post construction ant termite treatment along with external wall below plinth protection or masonry apron complete all as specified and directed by Engr-in-Charge.

Materials and Labour Treatment of soil under existing floor using chemical emulsion chlorpyriphos 20% EC or equivalent @ 1 ltr per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2(1 cement : 2 coarse sand) to match the existing floor complete all as specified and directed.

Materials and Labour Spraying or brushing two coats of chemical emulsion chlorpyriphos 20% EC or equivalent diluted in kerosene and applied @ 0.25 Ltr per Sqm on termite infected wooden surface such as doors, windows, cub boards, ceiling, wall panelling, etc complete all as specified and directed.

Materials and Labour Drilling of 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre (Staggered position) in connecting places of masonry work and wooden frame work and injecting chemical emulsion into these holes till refusal or to a maximum of 0.5 litre/hole and sealing with putty or adhesive with saw dust complete all as specified and directed. Note: Chemical emulsion shall be chlorpyriphos 20% EC or equivalent diluted in kerosene

Materials and Labour Voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

Material and Labour Brick work with fly ash bricks of designation 7.5, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directeded.

All as per item No. 12.00 here-in-before but except brick.

Supply and fix Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/vally gutter, fixed with self tapping screws complete all as specified and directed.

Material and Labour for 40 mm thick, plain cement concrete 1:2:4, type B-a (using 20mm graded stone aggregate) as in flooring finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Material and Labour for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection or pavings etc finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Materials and labour for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed by Engineer-in-Charge.

All as per item No.17.00 here-in-before but on vertical surfaces such as skirtings, dados, risers etc over and including 10mm thick backing course in CM 1:4 complete all as specified and directed.

Materials and labour Glazed ceramic colour tiles in vertical surfaces such as skirtings, dados, risers etc of size 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement ot match the tiles over and including 10mm thick backing course in CM 1:4 for receiving tiles complete all as specified and as directed.

Materials and labour Glazed ceramic colour tiles in vertical surfaces such as skirtings, dados, risers etc of size 450 x 300 x 7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement ot match the tiles over and including 10mm thick backing course in CM 1:4 for receiving tiles complete all as specified and as directed.

Material and labour Vitrified ceramic tiles 10mm thick (square/rectangular) light shade, polished area of each tiles n.exc 0.36 Sqm (600X 600X10mm), in floors etc, set and jointed in neat cement slurry and jointed in white or coloured cement to match with the existing etc over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Material and labour Vitrified ceramic tiles 10mm thick (square/rectangular), light shade, polished area of each tiles n.exc 0.36 Sqm (600X 600X10mm), set and jointed in neat cement slurry and jointed in white or coloured cement to matcht as on vertical surfaces such as skirtings, dados, risers etc over 10mm thick backing course in CM 1:4 complete all as specified and directed.

Materials and labour 16 mm thick Granite (of any type) work (table rubbed and polished) in Steps, Jambs, Cooking Platform, Dado, Skirting, Floor and like over and including 20mm thick screed bed CM (1:4) including pointing in white cement (1:2) using admixture of pigment to match the shade of granite stone including Cutting, rounded smooth edges and Polishing including taking out old unserviceable granite complete all as directed by Engineer-in-Charge.

Materials and labour Rounding to edges of stone slabs one edges , such as in steps , cooking plate form and other similar situations complete all as specified and directed.

Materials and Labour Dubbing out average 25 mm thick on irregular face of wall/ ceiling in cement mortar 1:4 and complete all as specified and directed.

Materials and labour 15 mm thick cement plaster on brick or concrete wall surfaces in cement mortar 1:6 finished top surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Material and Labour Rendering 20mm (10 + 10 mm) thick in cement mortar 1:4 on fair faces of brick work or concrete surface in two layers each mixed with integral water proofing compound @ 2% by weight of cement (WPC shall be mixed with top layer only i.e 5mm thick) finished the surfaces even and smooth without using extra cement complete all specified and as directed. Note : - Water proofing compound shall be measured and paid separately as "Supply only" item under relevant item of these schedule.

Materials and labour 10mm thick cement plaster in cement mortar 1:4 to concrete surfaces as in ceiling/chajja finished even and smooth without using extra cement including necessary scaffolding complete all as directed.

"Supply only" Liquid water proofing compound (ISI marked) complete all as specified and directed.

Materials and labour Preparation of newly plastered wall surfaces and applying two coats of Acrylic distemper of any colour / tint, over a coat of primer and 3mm thick wall care putty complete all as specified and directed.

Materials and labour Two coats of Acrylic distemper of any colour / tint, over a coat of primer after complete removal of existing treatment on old surfaces complete all as specified and directed.

Materials and labour acrylic distemper of any colour / tint one coat on old decorated wall surfaces including necessary preparations of surfaces complete all as specified and as directed.

Materials and labour White wash, three coats on newly plastered internal ceiling surfaces including necessary preparation of surfaces complete all as specified and directed.

Materials and labour White wash, on old plastered internal ceiling surfaces including necessary preparation of surfaces complete all as specified and directed.

Materials and labour Cement based paint of any colan/ tint, two coats over a coat of primer on newly plastered external surfacses including necessary preparation of surfaces upto any height of building including scaffolding and safety measure complete all as specified and directed.

Materials and labour Preparation of old steel or iron surfaces exc 10 Cm width or girth and applying one coat of synthetic enamel paint of any colour / tint complete all as specified and directed.

Materials and labour Preparation of old wood or wood based surfaces exc 10 Cm width or girth and applying one coat of synthetic enamel paint of any colour / tint complete all as specified and directed.

SATYAM CONSTRUCTION

JAY MA TARA TRADERS