ED/09/PandG/25-26/05

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (c),(iv) With carried earth arranged by the contractor within a radius exceeding 5 km. but not exceeding 10 km. including cost of carried earth. P.W.D (Bldg.), .Page -1&2, Item no - 3(c,iv

Supplying, fitting and fixing Stainless Steel railing consist of 38mm ia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx). P.W.D (Bldg.), .Page -109, Item no - 22

Brick work with 1st class bricks in cement mortar (1:4) (b) In superstructure, ground floor P.W.D (Bldg.), 3rd Corri & Addenda.Page -1, Item NO.3(b)

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. [Ref: P.W.D (Bldg.), Page -26, Item.- 10(i)] Annexure - II

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (When the height of a particular floor is more than 4 m the equivalent floor height shall be taken as 4 m and extra for works beyond the initial 4 m ht. shall be allowed under 12 (e) for every 4 m or part thereof). (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge [Ref: P.W.D (Bldg.), Page -42, Item.- 36(a)]

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (a) 20 mm thick plaster P.W.D (Bldg.), 3rd Corri & Addenda.Page -50, Item NO.1(ii)(a,b)

Neat cement punning about 1.5 mm. Thick in wal, dado, window, sills, floor, drain etc. [Ref : P.W.D.(Bldg.), Page-192, Item No. 15]

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc [Ref : P.W.D.(Bldg.), Page-200, Item No. 1 (a)]

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface :With super gloss (hi-gloss) - iv) Two coats (with any shade except white) [Ref : P.W.D.(Bldg.), Page-200, Item No. 2(b)]

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m ii) Other than Coloured decorative including white [Ref : P.W.D.(Bldg.), Page-64, Item No. 35(A),(b,ii)]

Add 18% GST

Add 1% Cess