SPECIAL REPAIRS TO BUILDING NO P 168 P 169 AND P 170 AT AFSSR UNDER GE AF GURGAON

Amount

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for including dismantling of floor tiles etc complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed.

Dismantling of stone slabs of any description or thickness in floors, approaches, dado/Partitions etc complete all as specified and as directed.

M&L for granite (of any type) stone slab 16 to 18mm thick machine cut and machine polised, as in , Kitchen platform etc jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall , one hole for gas pipeline complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed.

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and removing from site complete etc complete all as specified and as directed.

Taking down steel tubing & connections 15 mm dia bore complete all as specified and as directed.

S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) concealled/surfaced complete all as specified and as directed.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20 mm dia bore complete all as specified and as directed.

S&F tubes medium grade galvanized with all fittings & fixed concealled/surfaced complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length), including taking down complete all as specified and as directed.

M&L for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and re-fixing in the same opening complete etc complete all as specified and as directed.

M & L for Non Skid jointless,scratch proof& stain resistance ceramic printed coloured tiles 400x400x7-8mm thick as in skirting etc , set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed.

M & L for Non Skid ceramic printed coloured jointless tiles 400x400x 7 to 8 mm thick , as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed.

M&L for machine cut and mirror polished kota stone ( size not less than 55cmx55cm for flooring & for tread of steps will be in one piece) slab flooring 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror / granite polishing complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed.

M&L for Glazed ceramic printed coloured tiles 300mmx 450mm , 6 to 7 mm thick, as on vertical surfaces such as dado,skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match,incl cutting edges etc complete all as specified and and as directed.

M&L for machine cut and mirror polished kota stone slab 18-20 in riser of steps(in one piece ) , skirting, dado and pillar aid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror / granite polishing complete all as specified and as directed.

M&L for rounding to edges of stone(granite/kota) slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

S&F 75mm bore PVC (SWR) Junction single,(single Y/T) equal or unequal complete all as specified and as directed.

S&F 75mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade with rubber ring joints fixed to walls with dash true nut and bolt complete all as specified and as directed.

S & F 75mm dia PVC (SWR)bends/shoe with rubber rings joints fixed as required complete all as specified and as directed.

M&L for TMT bars 6 to 8 mm dia dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings,shelves,chajjas incl edges and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces complete all as specified and as directed.

M&L for RCC 1:1.5:3 type A1 in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves,chajjas,facia etc complete all as specified and as directed.

S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed.

S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed.

M&L for cement concrete type B-0 1:2:4 (12.5 mm granded stone aggregates) in door and windows frames any size single or double rebated, as required etc complete all as specified and as directed.

S&F 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S& F 2nd class hard wood 35 mm thick factory made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) etc complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 95mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with Ms Squre Tube in opening etc complete all as specified and as directed.

S & F factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded both side prelam PVC sheet instead of plain colour PVC 'C' channelled having a PVC sheet strip of 20 mm wide stuck inside with solvent cement for siles and palin colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail : panelling of prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame a site as per specification and drawing etc complete all as specified and as directed.

Supply and fixing mild steel cup board 60cm depth & with sides,back& 3 shelves&partition,top bottom& mild steel door shutter Godrej pattern two leaves with frame,incl necessary fittings of 18gauge MS sheet with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings& two coats of spray painting over a coat of red oxide zinc chromate primer complete. The frame of cupboard to be fixed to wall with 6 Nos of hold fasts of 25 x 3mm flat iron, 15cm long The cost of hold fasts & grouting them in CM (1:3) is deemed to be included in unit rates (Only front face of cupboard to be measured) complete all as specified and as directed.

S&F roll formed galvanised prepainted steel section window/ventilater section of frame 72x55 mm fixed to wall or concrete surface with MS hold fast (30X5mm section) 150 mm long made, of galvanized steel powder coated and section of shutter 47x20 mm ,mulion section 72x50 mm (Base steel as per IS 513 "D" quality galvanozed as per IS 277 with zinc of 120 gms/sqm.) glazed shutter and wire gauge shutter prepare to receive wire mesh to the shutter(Double door shutter) with total coated thickness of 0.6 mm including powder coated grill / guard bars made of square bars 10mm dia at 150mm c/c Horizontal spacing fixed in MS flat frame (30x5mm) fixed to windows frame with screws,incl 4 to 5 mm thick sheet glass, 0.36mm stainless steel wire cloth with 1.40mm aperture necessary fittings and all builders hardware such as handles, tower bolts & stays etc. complete all as specified and as directed Type-Eco 4000 series ref drg no CEAF/STD-191/2014 SH1/2&2/2.

S&F factory made PVC 5.5mm thick PVC Celuka ply one side decorative lamination and other side plain/coloure for back of kitchen cabinets complete all as specified and as directed.

S&F factory made PVC shutter/Shelves in required size at shape made out of 18mm thick PVC Celuka ply one side decorative lamination and other side plain/coloure for kitchen cabinets complete including required frame work with panels shall be fabricated using adhesive, screws and solvent cement etc where ever required all the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent complete all as specified and as directed.

S&F ball catcher with 8 mm dia steel ball magnet catcher for cupboard shutter including striking plate as approved etc complete all as specified and as directed.

S&F 30mm wide flaps continuous (Piano) hinges mild steel bright finish complete all as specified and as directed.

S&F 40 mm dia cup boards knobs fixed with nut , screw and washer of mild steel , bright finished Complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises, disposed off from outside Md land complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed.

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed.

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed.

S&F 100 mm thick stainless steel butt hinges, heavy weight, cold rolled and fixed etc complete all as specified and as directed.

S&F 125 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed.

S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and as directed.

S&F in repair white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick for kitchen with plugs,waste pipe, washers; including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe overall size 495mmx 420mm boul size 410mm x330mm x 160mm complete all as specified and as directed.

S&F in repairs vitreous china squatting pan orissa pattern long pan size 580 mm white with cast iron ‘P’ or ‘S’ trap, front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed.

S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts and Making Good to Floor/ distrubed surfaces and fixed-in-repairs, complete all as specified and as directed. MAKE : HINDUSTAN SANITARYWARE 21027/ JAQUAR CNS-WHT553SN/ PARRYWARE C-0252(S) or equivalent out of makes specified in list of makes.

S&F Plastic Water Closet Seat Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR CNS-WHT-111N or equivalent out of makes specified in list of makes.

S&F Health Faucet with Wall Hook, Chromium Plated having 1.00 Metre long with PVC Hose Pipe and fixed in repairs, complete all as specified and as directed. MAKE : JAQUAR ALD-CHR-585 or equivalent out of makes specified in list of makes.

S&F in repair tubular towel rail 20mm dia type brass chromium plated 600mm long between flanges complete all as specified and as directed.

S&F Brass Chromium Plated Central Hole Mixture 15mm bore (dia) without Popup Waste System with 450mm long provided Hoses including Flange suitable for Wash Hand Basin , complete all as specified and as directed.

S&F Brass Chromium Plated Mixture Unit Hot and Cold for Shower suitable for fixing 15mm bore (dia) Pipe including Flange, complete all as specified and as directed.

S&F Brass Chromium Plated Sink Mixer 15mm bore (dia), Wall mounted with 122mm (5") Swivel Spout, Connecting Legs including Wall Flanges , complete all as specified and as directed.

S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe & fixing of chain & pull or lever if including PVC pipe etc complete all as specified and as directed.

S&F in repair bib tap fancy type long body cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe including flanges complete all as specified and as directed.

S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe including flanges complete all as specified and as directed.

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and as directed.

S&F in repair kitchen plate rack stainless steel 1 mm thick of size 90cmx75cm (weight not less than 8kg)complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts in patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete to be finshed even and smooth without using extra cement over 10 mm thick in 1:4 as dubbing coat upon exposed reinforcement etc complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) etc complete all as specified and as directed.

M&L for Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, mixing WPC as per manufacturers instructions, Plastered Surfaces finished Fair and Even, complete all as specified and as directed. NOTE: WPC will be Measured and Paid under appropriate Item. Area includes in this items upto G+3 stories of building. scaffolding and other arrangement to be done by contractor, nothing extra shall be paid to contractor.

M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.

M&L for preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparing old Decorated/Treated Plastered surfaces of Walls upto four storey by brooming down or steel wire brushing and scraping down and repair with putty wherever required and applying Two Coats of Acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparing newly Plastered surfaces of Walls upto four storey by applying 1 mm Wall Putty, cutting/rubbing to obtained a Smooth Surface and applying Two Coats of Acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:3) with wpc on RCC Chajja / Facia over 20mm thick in CM 1:4 as dubbing coat etc complete all as specified and as directed. Note:- Area includes in this items upto 4 stories of building, necessary scaffolding and arrengments are deemed to be included in the lum sum rates.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, roof padding/staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for two coats of white wash on ceiling on old plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for preparing newly plastered surface of wall & applying two coat of oil bound distemper white or any tint over a coat of primer etc) complete as specified and directed.

M&L for preparing by complete removal of existing plastered surface of wall and applying two coat of oil bound distemper white or any tint over a coat of primer etc) complete as specified and as directed.

M & L for 1.5mm thick wall care putty on wall complete all as specified and as directed.

M&L for preparing new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

M&L for preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F mild steel helical door spring 150 mm long ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and as directed.

Disconnecting existing tank of capacity exc 250 ltr but not exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position incl Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc.complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks IS :12701-1996 marked (cylindrical vertical with close top) of 500liter capacity with an including 20mm dia ball PVC float valves with polythene float and flynut screwed for iron pipe or brass and fixed etc complete all as specified and as directed.

S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and as directed.

S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed. Notes : WPC shall be measured and paid seperately Notes :- Rates includes to carried out the work on roof slab up to 4th stories building nothing extra shall be admissible on this account.

M&L for APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) with 15 cm longitudinal & horizontal over lapping and joints finally pasted with thermo- fused withblow lamp laid incl evenly a tack coat of industrial bitumen 85/25 the rate of 1.2 kg/sqm including cleaning surfaces Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush etc complete all as specified and as directed.

Taking down PVC/cast iron pipes any bore including fittings of any dia with cement or lead joint fixed to walls or laid in trenches complete for refixing or replacement complete all as specified and as directed.

S&F in repair for 50 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed.

S & F in repair for 75 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls with GI stack clamps complete all as specified and as directed.

S & F in repair for 100 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls with GI stack clamps complete all as specified and as directed.

S&F in repair for 75mm bore out let floor trap of Cast iron with stainless steel grating including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed.complete all as specified and as directed.

S&F in repair for 100mm bore out let floor trap of Cast iron with stainless steel grating including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed.complete all as specified and as directed.

S&F in repair 50 mm cast iron cowls complete all as specified and as directed.

S & F for 75 mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and as directed.

S & F for 100 mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and as directed.

S & F for 100 mm bore cast iron branch piece, "T" , single (equal or unequal) ordinay or inverted (spigot or socket type ) with excess door or with parallel branches complete all as specified and as directed.

S & F for 75 mm bore cast iron branch piece, "T" , single (equal or unequal) ordinay or inverted (spigot or socket type ) with excess door or with parallel branches complete all as specified and as directed.

M&L for PCC (1:2:4), type B-1 (using 20 mm graded crushed stone aggregate), 40mm thick as in flooring finished even & smooth without using extra cement as all specified (add recron 3s fibre qty as per manufactures instruction when the concrete is green and fresh and rates are included in this item) complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking into credit and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.

Takig down unserviceable sub main wiring of any type/size including wire.conduite/battens etc complete all as specified and as directed.

Takig down unserviceable MCB DB's box/ of any size/rating complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm PVC insulated unsheathed single core multi standard copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit concealed in walls/Ceiling and Terminated to sunken box of modular type including modular frame white cover plates suitable for fixing switches, sockets etc including 1.5 Sqmm PVC insulated Copper conductor cable as earth continuity conductor and connecting to common earth dolly and taking down old one complete all as specified and directed for the following:-

(a) One light point /bell point controlled by one switch with cable 1.5 Sqmm size.

(b) One fan point/Exhaust fan controlled by one switch with cable 1.5 Sqmm size.

(C) One llight point controlled by two way 6 Amps switch.

(d) One 5 pin socket outlet 5/6 Amps on Same board.

(e) One 5 pin socket outlet 5/6 Amps on independent board.

M&L for point wiring complete with stranded copper conductor 4 Sqmm size( Nominal area) PVC insulated unsheathed FRLS Grade cable 1100 volts grade confirming to IS 694uit confim drawn in and including medium grade concealed PVC conduit confiming to ISI marked not less than 25 mm dia with concealde sunk-in pressed steel terminal boxes of modular type including modular frame white cover plates suitable for fixing switches, sockets etc including single core stranded copper conductor 2.5 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth doily drawn in same concealed conduit complete all as specified and as directed.

M&L for point wiring complete with stranded copper conductor 2.50 Sqmm size( Nominal area) PVC insulated unsheathed FRLS Grade cable 1100 volts grade confirming to IS 694uit confim drawn in and including medium grade concealed PVC conduit confiming to ISI marked not less than 25 mm dia with concealde sunk-in pressed steel terminal boxes of modular type including modular frame white cover plates suitable for fixing switches, sockets etc including single core stranded copper conductor 2.5 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth doily drawn in same concealed conduit complete all as specified and as directed.

S&F submain wiring with sheathed multi-stranded FRLS Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6 Sqmm single core HR Grade and one runs of 6 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB complete all as specified and as directed. Note :- 1.Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. 2. Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

S&F modular switch one way 6 amps 1 module complete all as specified and as directed.

S&F modular switch one way 16 amps 1 module complete all as specified and as directed.

S&F modular socket out let 6 Amps 230 volts AC 3 pin multipurpose type complete all as specified and as directed.

S&F modular socket out let 6/16 Amps multipurpose complete all as specified and as directed.

S&F modular switch two way 6 amps 1 module complete all as specified and as directed.

S&F in repair ceiling rose surface bakelite with three terminals complete including taking down rusted metal box and necessary platering work and finish with existing wall paint complete all as specified and as directed.

S&F modular fan step type regular two module complete all as specified and as directed.

S&F Singal pole neutral Sheet matel enclosure box with a two pin and earth plug and socket complete with singal pole MCB 20 Amps and ncluding taking down complete all as specified and as directed.

S&F Double pole neutral Sheet matel enclosure box with a two pin and earth plug and socket complete with singal pole MCB 20 Amps and ncluding taking down complete all as specified and as directed.

S&F exhaust fan, steel body AC singal phase 230 V of size 300mm sweep with,blade,and frame and louvers and including taking down complete all as specified and as directed.

S&F exhaust fan,Ventil Air DX WHT Ventilting Exhast fan AC singal phase 230 V of size 250 mm sweep with,blade,and frame and louvers and including taking down complete all as specified and as directed.

S&F wall mounted extruded aluminium housing high quality indoor batten LED tube 20 watt (2ft long) colour temperature 6500 K (4" long) lumen 2000 -3000, PF> 0.9, THD less 15% diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as per existing site requirement and including taking down complete all as specified and as directed.

S&F wall mounted extruded aluminium housing high quality indoor batten LED tube 10 watt (2 ft long) colour temperature 6500 K (2" long) lumen 2000 -3000, PF> 0.9, THD less 15% diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as per existing site requirement and including taking down complete all as specified and as directed.

S&F Bldg security light Supply and fixing in replacement of LED building light luminaire 35 watt,pressure dia cast aluminium housing with heat resistant toughened glass & IP 66 protection and including taking down complete all as specified and as directed.

S&F lamp holder,PVC/Polycarbonale type with black plate suitable for batten fitting including taking down complete all as specified and as directed.

S&F Modular Bell push 5 Amps one module complete all as specified and as directed.

S&F in repair electric bell Ding Dong, AC 230 volts and including taking down complete all as specified and as directed.

S&F sheet metal enclosures for double door distribution board factory made duly painted 8 way SPN and neutral 240 v with 200 amps rated bus bar , suitable for fixing MCB /Isolators and including taking down complete all as specified and as directed.

S&F miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP240V, 10 KA 'B' curve , in the MCB DB Complete with connection testing and commissioning and including taking down complete all as specified and as directed.

S&F miniature circuit breaker (MCB) of SPN and current carrying capacity 25 Amps 240V, 10 KA 'C' curve , in the MCB DB Complete with connection testing and commissioning and including taking down complete all as specified and as directed.

S&F miniature circuit breaker (MCB) of SPN and current carrying capacity 40 Amps 240V, 10 KA 'C' curve , in the MCB DB Complete with connection testing and commissioning and including taking down complete all as specified and as directed.

S&F MCCB 100 Amps, TPN, Breaking capacity 10 KA, 415 V 'C' curve adjustable type complete all as specified and as directed.

S&F MCCB 63 Amps, TPN, Breaking capacity 10 KA, 415 V 'C' curve adjustable type complete all as specified and as directed.

S&F steet light bracket made out of 40 mm dia light grade GI pipe 1.5 Mtr long bend to shape including necessary fixing arrangement with clamp of suitable size made out of 35x 4 mm MS flat suitable shape to pole including nut bolt 03 nos and washer complete all as specified and as directed.

M R INTERIOR HUB

ASHISH AND CO

M/S Rohit Enterprises

P R Constructions

M/S ujjwal associates