Rajkiya Kanya Inter College Padrauna ke marammat / sundarikaran ka karya.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (D.S.R 2.8.1)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mte lead 15.56

12 mm thick plaster with 1:6 cement and coarse sand morter on brick work including ranking and joint washing and cleaning and including supply of all materials labour and T&P etc. required for proper completion of work. (D.S.R.13.5.2)

Dismantling tile work in floors and roofs laid in cement morter including stacking material within 50 meter lead .For thickness of tiles 10 mm to025 mm(D.S.R 15.23.1)

providing and laying in position cement concrete of specific grade excluding the cost of centering -All work up to plinth level 1:4:8 (1 cement : 4 coarse sand (zone-III) derived from natural sources :6graded stone aggregate40 mm nominal size Recycled Aggreate (RA) ) s per (D.S.R 4.1.8)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in 6 coarse sand) Cement mortar 1:6 (1 cement (DSR.6 1.2

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement All work up to plinth level 1:15:3 (1 cement 15 coarse sand (zone 3 graded stone III) derived from natural sources aggregate 20 mm nominal size derived from natural sources) For plinth Beam (D S.R 5.3

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure and plinth in 6 coarse sand) Cement mortar 1:6 (1 cement (DSR.6.4

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm As per (D.S.R 11.41.2)

cement concree fiooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate ) finished with a floating at coat of neat cement , including cement slurry, but excluding the cost of nosing of steps etc completed .(D.S.R.11.3)