SPECIAL REPAIR TO AIRMEN BILLETS IN DOMESTIC AREA AT AF STN JAISALMER

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) like PVC door, window frame n. exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

Mild steel work in framed work such as doors, grills, gratings, framed guard bars etc. with ends of bars shouldered and/ or riveted, or forged into spikes, and in ladders, railings, frame of water tank etc.and similar work confirming to Fe-410-W (Grade E-210 quality 'A') including dismantling wrought iron or mild steel work of any description complete all as specified and directed.

35 mm thick, IInd class hard wood (Bonsum/Hollock) plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified & as directed

35 mm thick 2nd class hard wood (Hollock/Sal/Bijasal), glazed skeleton door shutters factory made open rebated and prepare to receive glass, gauge (without sash bars) edges of framing plain chamfered or rounded, fitted with cut including mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8, clause No 8.24 (a) complete all as specified and directed.

Factory made steel windows with side hung shutters including projecting type hinges with steel handle of MS flat 25x5mm and 2 Nos steel tower bolts, 100mm long fixed to shutter complete with and including glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of red oxide Zinc-Chromate primer and also making good disturbed surfaces of cills and jambs to match with adjoining surfaces complete all as specified and directed

All as per SI No 7.00 here-in-before but without glazing bars complete all as specified and as directed .

Factory made steel ventilators with top hung shutter including hung ,fixed type with glazing bars, dovetailed or welded including with one shop coat of Zinc-chromate primer complete all as specified and as directed .

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style), consisting of frame made out of MS tubes for stiles and for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

Mild steel hold fast made out of flat iron using steel conforming to Fe-290 Gde-E-165 complete all as specified and as directed . (Note :- The fixing element of hold fasts shall be deemed to be included in the unit rate quoted for frames/ chowkats) complete all as specified and directed.

3mm thick sheet glass, ordinary quality and glazing with oil putty /wooden beading in square n. exc 0.80 Sqm in each panes fixed any bldg hight including hacking out old broken glass complete all as specified and directed.

3mm thick figured glass, pin head type and glazing with oil putty/ Wooden beading in square n. exc 0.50 Sqm in each panes fixed any bldg hight including hacking out old broken glass complete all as specified and directed.

Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with GI wire staple fixed as in repair complete all as specified and directed.

2nd class Hard wood beading straight ( any size ) for glazed or gauzed joinery , renewed , including mitres etc, and removing old beeding. fixed as in repair complete all as specified and directed.

250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Mild steel framed work as in grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tank and similar works conforming to Fe 290 Gde E-165, complete all as specified and directed .

100 mm long, aluminium anodised, barrel tower bolts, of extruded section, ISI marked, fixed in repair complete all as specified and directed .

150 mm long, aluminium anodised, barrel tower bolts, of extruded section, ISI marked, fixed in repair complete all as specified and directed .

150mm Extruded aluminium alloy handle, fabricated type, anodized (ISI marked) complete all as specified and directed.

MS helical door spring 300mm long and including roller and roller plate complete all as specified and directed.

MS helical door spring 300mm long and including roller and roller plate fixed as in repair complete all as specified and directed.

100 mm long Butt hinges extruded aluminium alloy , with galvanised mild steel hinge pin, anodised, type C-21, ISI marked complete all as specified and directed .

100 mm long, Butt hinges, medium weight, cold rolled mild steel, ISI marked complete all as specified and directed ..

Preparation of old surfaces of wood or wood based materials of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed.

Preparation of newly surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.

Prepariation of new treated steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint on already red oxide primed surface complete all as specified and directed.

Prepariation of old or previously untreated steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint back complete all as specified and directed.

Rendering 15mm thick in cement and sand mortar (1:6) on brick masonry or concrete surfaces of wall and finished even and smooth (without using extra cement) including taking down cement plaster complete all as specified and directed.

Rendering 10 mm thick in cement and sand mortar 1:3 on fair faces of ceiling including finishing the surface even and smooth without using extra cement including taking down cement plaster complete all as specified and directed.

Preparation of newly plastered surfaces or unplastered surface of walls and applying two coats of oil bound distemper over a coat of primer over a smooth finish of wall care putty complete all as specified and directed.

Complete removal of existing treatment including preparation of old plastered surfaces or unplastered surface of walls and applying two coats of oil bound distemper with roller over smooth finish of wall care putty complete all as specified and directed.

Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

Preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed

Prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying one coats of cement base paint (tinted) on surfaces of walls any colour as approved complete all as specified and directed.

Anti skid coloured ceramic tiles 7 to 8mm thick(square / rectangular ) area of each tile exceeding 0.06sqm and n exc 0.16 sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed .

Coloured glazed ceramic tiles in dado/skirting 450x300x7mm or 350x250x7mm thick as approved on vertical surfaces, dado and skirting over and including 10mm thick cement and sand mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc. complete all as specified and directed .

20-25 mm thick machine cut kota stone slab as in flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:6 complete all as specified and directed . Note:-Size of Kota Stone slab shall be 55 cm x 55 cm.

20-25 mm thick machine cut kota stone slab on vertical surfaces/riser of step/ skirting etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and including 10 mm thick rendering in cement and sand mortar 1:4 complete all as specified and directed . (Length of Kota Stone slab shall be such that it matches with the size of stone slab in flooring and the width as directed)

Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed .

20 mm thick machine cut Black granite stone slab work ( table rubbed and polished) in step, jambs, pillars , window cill, in cooking platform, including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade, laid over 15 mm thick cement screed in cement morter 1:6, complete all as specified and directed .

Rounding to edges of stone slabs one edge such as in steps,cooking platform,and other similer situations complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for and removing the debries to distance not exc 50 m from site complete all as specified and directed.

Reinforced Cement concrete in 1:2:4 type B1 using 20mm graded aggregate as in wash basin counter slab supported on wall , chajjas etc all as specified complete all as specified and directed.

Mild steel TMT bars as in reinforcement, 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs not exceeding 200 mm thick including edges for rough-finished surfaces of concrete flat complete all as specified and directed.

Precast cement concrete (1:3:6), type C-1 (using 20 mm graded stone aggregate) solid block masonry exc 10cm and set in cement and sand mortar (1:6), and including demolition of old block masonry, complete all as specified and directed.

Cupboards/wardrobes, factory made, framed shell be of 1.25 mm thick pressed steel PBI sheet of size 90x70mm shutter shall made of 1mm thick pressed steel with 6 Nos of 100 mm lomg hinges 3.15mm thick steel hinges standard pattern rim lock with complete locking arrangement including 12 mm vertical rod shall be provded (brass mortice lock vertical type, size 65mm, 2 levers, ISI marked with escutcheon plate abd two key and with including two coats of spray painting with synthetic enamel paint of approved over a coat of primer including fixing with minimum 6 nos 12 mm dia mild steel bolts 150 mm long grouted in brick wall/ concrete including making good the disturbed surfaces as original with CM (1:4) or PCC (1;2:4) type B0 complete all as specified and directed.Note:- The measurement shall be taken of front elevation and not girtwise

Jodhpur stone roof slab, self faced 5.0 cm to 7.5 cm thick, 25 cm to 35 cm wide ,hoisted set, jointed and grouted in cement and sand mortar 1:6 and pointed in cement and sand mortar 1:3 , complete all as specified and directed .

Vitreous China squatting pan “Orissa” pattern, size 580x440mm, white, with integral foot rests (excluding flushing cistern and flush pipe), with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti syphonage pipe etc including provn of PCC 1:5:10 bed supplied and fixed in repairs, complete all as specified and directed .

Vitreous China wash down water closet pan , white, (excluding flushing cistern and flush pipe) but including CI ‘P’ trap and also including connection to drain (or outgoing pipe) and to flushing pipe, anti- syphonage pipe etc, with plastic water closed seat cover ( white ) closd pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device with spary jet and health flucet as suitable size supplied and fixed in repairs, complete all as specified and directed.

Counter type wash basin Oval shape of size (560x450)mm white colour excluding taps, ZEN-10049 or Equivalent fixed in repair complete all as specified and directed .

Viterous chaina half stall urinal flat back white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waster pipe) including providing and fixing plugh bedding Urinal against wall in CM 1:2 securing Urinal to plug with and including 60 mm long brass screw pointing around urinal back in cement etc including urinal spreader fixed in repair complete all as specified and directed .

PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved fixed in repair complete all specified and directed.

PVC connection 15 mm size, of length 600 mm, with PTMT nuts, supplied and fixed in repair complete all as specified and directed .

Brass chromium plated shower rose (ISI marked) 75mm size with or without swivel joints , including fixing to steel pipe or union, fixed as in repairs complete all as specified and directed.

Angle valves, fancy type, chromium plated screwed down, ,half/full turn handle, screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, fixed as in repairs complete all as specified and directed.

Bib tap, cast copper alloy chromium plated fancy type, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore of pipe 15mm, fixed as in repairs complete all as specified and directed .

Concealed stop valves, fancy type, chromium plated screwed down, ,half/full turn handle, screwed both ends for iron pipe or for unions, for dia of pipe 15 mm, fixed as in repairs complete all as specified and directed.

15 mm bore pillar taps cast copper alloy, fancy type with capstan head, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe , fixed as in repairs, complete all as specified and directed .

Tubular towel rail of chromium plated ,20 mm dia , 600mm long between flanges , fixed with and including chromium plated brass screws and wooden/plastic cleats fixed as in repairs complete all as specified and directed .

Curtain rod 25 mm dia , (heavy duty) stainless steel fancy type with brackets, complete all as specified and as directed .

32/40 mm spring type PVC waste pipe fixed to WHB & Sink etc supplied and fixed in repairs complete all as specified and directed ( Note minimum length of each pipe should not be less than 0.70RM)

Galvanized steel water tubing medium grade of 15mm bore with & including all fittings and complete to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed.

Galvanized steel water tubing medium grade of 20mm bore with & including all fittings and complete to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 20mm bore, complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Brick /stone wall complete all as specified and directed.

20 mm dia Gun metal gate valves with iron wheel head, screwed both ends for iron pipes fixed as in repair complete all as specified and directed .

Rotational moulded polythylene water storage tanks 1000 ltr capacity , triple layer (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore including taking down existing water tank complete all as specified and directed.

75 mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints, laid in trenches /floor or fixed to walls including digging and making good as existing. fixed as in repair complete all as specified and directed .

PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed .

PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement fixed as in repairs complete all as specified and directed.

75mm dia PVC (SWR) bend any radius with access door fixed as in repairs complete all as specified and directed.

75mm dia PVC (SWR) bend any radius fixed as in repair complete all as specified and directed.

110 mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints, laid in trenches /floor or fixed to walls including digging and making good as existing. supplied and fixed in repairs complete all as specified and directed .

110mm dia PVC (SWR) bend any radius fixed as in repairs complete all as specified and directed

110 mm PVC (SWR) Junction single (Single T) equal or unequal with access door fixed as in repair complete all as specified and directed

110 mm dia bore PVC (SWR) vent cowl fixed in position to vent pipe complete all as specified and directed .

Stack clamps out of 50 mm by 5 mm flat iron and 16 mmm dia round iron stays.including bolts and nuts and securing ends of stays to wall or roof in dia 110mm pipe fixed as in repair complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness (below or above GL) complete all as specified and directed .

100 mm thick plain cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/hard standing finished even and fair surfaces complete all as specified and directed.

25 mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floor finishes complete all as specified and directed .

75 mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate laid in bays including finishing the top surface of concrete even and smooth, without using extra cement as in plinth protection and provided joints 10 mm wide & full depth at 3 m distance and every change of direction filled with sand and bituminious mix 1:3 complete all as specified and directed.

Rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of ceiling of chajja,beam,facia roof slab drop including finishing the surface even and smooth without using extra cement including taking down cement plaster complete all as specified and directed.

0.71 mm thick Precoated colour or mill finish Aluminium Ridges plain (500-600mm) of alloy IS designation 31500, Aluminium Alloy (AA) 3004 (ISO designation). For colour, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/ tapping SS screws of size M6, 60 mm long with 3 mm EPDM seal and SS plain washer complete all as specified and directed.

Rendering 10 mm thick plaster in cement and sand mortar 1:4, mixed with water proofing compound as per manufacturer’s instructions, on cement concrete surfaces including finishing the surface even and fair complete all as specified and as directed . Note :- Supply only of integral liquid water proofing compound shall be measured and paid for separately under appropriate item of this schedule).

Supply only integral liquid water proofing compound, ISI marked, complete all as specified and as directed .

Roof treatment with polymeric membrane (APP based) with non woven polyster mat as reinforcement with following:- (a) M & L for surface preparation by removal of existing treatment of tar felt treatment/PCC/plaster/tiling/loose particle to ensure of clean. Smooth and very surface and preparing surface. (b) M&L for providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.300 ltr/Sqm of dry and clean surface. (c) M&L for applying a tack coat of hot blown bitumen 85/25 grade @1.2 Kg/Sqm grouted all as specified and as per manufacturer instruction and spraying fine sand over the bitumen being non accessible roof. (d) M&L for providing & laying APP based polymeric membrane of 3mm thickness of weight of 3.0 Kg/Sqm with non woven polyster fibre as in reinforcement on primed surfaces by torch application with side over paps & ints over laps etc apper manufacturers instr.

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and directed .

150 mm bore reinforced concrete drain pipe, class NP-2, laid on concrete bed to required slope and jointed complete with collars, including demolition and breaking up drain pipe ( salt glazed ware/AC/ Reinforced concrete ) complete all as specified and as directed . (Note :- Excavation and earth work and PCC bedding and haunching shall be measured and paid for separately under appropriate items of this Schedule.)

P:C:C 1:3:6 type C-2 using 40 mm graded stone aggregates as in beds of pipe 150 mm bore, laid to required slope including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and directed .

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, laying of cables etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed .

Returning, filling in soil including spreading, levelling, watering and well ramming in layers each n.exc 25cm complete all as specified and directed .

Removing surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed .

SFRC pre cast manhole covers with rectangular frame of size 110 cm x 65 cm MD-10 fixed at site up to satisfaction of Engr-in-charge and incl dismantling of old manholes cover slab complete all as specified and directed .

Taking down carefully existing unserviceable/perished conduit/ batten/ casing caping aluminium/copper point wiring any type for light, fan, bell, socket, power point etc including all fixtures and fittings such as batten/ conduit/casing caping, switches, sockets, ceiling rose, pendent holder, lamp holders, bracket holders, light fittings, top sheet covers, fan regulators etc and making good the disturbed surfaces of wall/ceiling complete all as specified & directed.

Point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke & Halogen (FRLSH) cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke & Halogen (FRLSH) cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including non metalic rigid PVC conduit 20mm dia with accessories fixed to cutting chases in walls by cutter and making good the surface in cement and sand mortar 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surfaces conduit with clamps, gutties etc for RCC ceiling with including cast iron/pressed steel/wooden terminal boxes (as per site requirement) including providing new 3 mm thick plastic laminated sheet cover (Hylem) complete all as specified and directed.

All as per SI No 101.00 here-in-before but 3 pin socket outlet 5 /6 Amp on the same board with other switches complete all as specified and directed .

All as per serial item No. 101.00 here-in-before but for one 3 Pin, 5/6 Amps, socket outlet controlled by one 5/6 Amps switch on independent board complete all as specified and directed.

All as per SI No 101.00 here-in-before but one light point controlled by two way switch complete all as specified and as directed by Engineer-in-Charge.

All as per SI No 101 here-in-before but with multi stranded copper conductor FRLS cable, 1100 volts grade (ISI marked), PVC insulated and unsheathed of size 2.5 Sqmm single core and with and including 2.5 Sqmm PVC insulated unsheathed single core copper conductor cable as earth continuity conductor to common earth and earth dolly for one 15 Amp and 5 Amp socket outlet point on the independent board with terminal box of size 175 mm x 100 mm x 3.15 mm complete all as specified and directed .

Sub main wiring with 2 run of single core 6.0 Sqmm multi-stranded copper conductor 1100 volts grade heavy duty FRLS PVC insulated unsheathed cable drawn through and including PVC conduit medium grade of suitable size on wall surface conduit ncluding 6.0 Sqmm PVC insulated unsheathed single core copper conductor earth wire including taking down old unserviceable submain wiring complete all as specified. Note : Two run of 6.00 sqmm cable and one run of 6.00 sqmm cable as earth wire continuity conductor and stove enamelled steel conduit shall be measured & paid as one unit.

Switch piano, flush type, Single Pole, one way, 5/6 Amp, 240 Volts (ISI Marked) complete all as specified and directed.

Socket outlet , 5 pin, 5/6 Amps, multipurpose ,flush type, 240 Volts (ISI Marked) complete all as specified and directed.

Switch piano flush type , single pole 5 Amps, two way, ISI marked complete all as specified and as directed

Ceiling rose surface bakelite with two or three terminal PVC/Polycarbonate, isolated body (ISI Marked), 240 volts in repair complete all as specified and directed.

Switch socket combination 2 in 1 , 5 /6 and 15/16 Amp, 230 Volts , multipurpose , flush type , ISI marked complete all as specified and as directed .

Stepped type electronic fan regulator, flush type and connecting up, 150 watt, 240 volt (ISI marked) fixed as in repair complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5 deep below normal ground level and connected to and including galvanized earth lead wire 4mm dia upto 7.5 metre by means of GI nuts, bolt, check nuts, washers thimbles, etc as shown in electrical plate No 03 SSR Part I and connection to main switch board or panel and testing on completion including excavation and earth work in any type to soil, returning fitting in and removal of surface spoil to a distance not exc 50 metre, PCC chamber (1:3:6) type C-2, charcoal and salt mixed layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe light grade 20mm bore for watering and 15mm bore meter long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25mm x 3mm, bolts, nuts and washers 75mm thick RCC cover 1:2:4 type B-1 shall be provided on CI frame etc complete all as specified. Note - PCC chamber shall be constructed at least 1.5m away from the earth electrode. The pipe for watering shall be provided in slanting manner.including the cost of 7.50m GI pipe for protection of earth wire/strip

LED integrated batten fitting, 18W, 230V surface mounted etc, complete with 18W LED tube rod with all accessories pre-wired including connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down old unserviceble LED fittings complete all as specified and directed.

LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size including taking down old unserviceble LED fittings complete all as specified and directed.

LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including taking down old unserviceble LED fittings complete all as specified and directed.

Taking down carefully ceiling fan 230 volts single phase 50 Hz from the position after dismantling fan blades of any sweeps and carrying out complete servicing with and including cleaning, greasing, replacing flexible 3 core cable of size 1.5 Sqmm with copper conductor from ceiling rose to fan, replacing rubber reel, split pins, check nuts, PVC connector complete with and including painting with 2 coats of synthetic enamelled paint over a coat of red oxide anticorrosive primer after rubbing entire fan body and blades and fixing back the fan in position complete all as specified and directed.

Supply and fixing flush mounting factory made sheet metal enclosure for VTPN DB 4 way, 415 Volt, Double door, IP-43 protection, IK-09, No. of modules (8+20) with metal door with 200 Amps copper bus bar, with neutral bar, earth bar and cables ties for cable management fully insulated bus bar complete all as specified and directed .

Sheet metal enclosure powder coated single phase DB SPN 8 ways and neutral 240 Volts, AC supply, 50 Hz, with 200 Amps rated bus bar Double Door (IP-43 IK 09 with metal door) suitable for fixing of MCBs including fixing of lugs in main incomming and outgoing line and fixing of cable glands of suitable size including grouting flush in the wall by means of nuts, bolts, angle iron and making good disturbed surfaces including taking down old unserviceable DB complete all as specified and directed.

Sheet metal enclosure powder coated single phase DB SPN 12 ( ways and neutral 240 Volts, AC supply, 50 Hz, with 200 Amps rated bus bar Double Door (IP-43 IK 09 with metal door) suitable for fixing of MCBs including fixing of lugs in main incomming and outgoing line and fixing of cable glands of suitable size including grouting flush in the wall by means of nuts, bolts, angle iron and making good disturbed surfaces including taking down old unserviceable DB complete all as specified and directed.

MCCB, 4 Pole, 125 Amps rating, rupturing capacity 16 kA, 415 Volt grade, AC supply, 50 Hz, thermal Magnetic protection unit and making connections using suitable size copper lugs/thimbles and crimping tool, including disconnecting & taking down old unserviceable MCCB, complete all as specified & directed.

MCB, SPN, 40 Amps rating, with over load and short circuit protection 'C' curve and rupturing capacity 10 kA, 240 Volt grade, AC supply, 50 Hz and making connections using suitable size copper lugs/thimbles, including disconnecting & taking down old unserviceable MCB, complete all as specified & directed.

MCB, Single Pole, 6 to 32 Amps rating, with over load and short circuit protection 'C' curve and rupturing capacity 10 kA, 240 Volt grade, AC supply, 50 Hz and making connections using suitable size copper lugs/thimbles including complete, all as specified & directed.

Supply, laying, jointing and testing XLPE insulated screened PVC bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 70 sq mm 3.5 core confirming to IS-7098 (Part-I-1988) laid in trenches, along poles through pipes etc. complete all as specified. Notes :- (i) Sand cushioning, cable protection, GI pipe and excavation & earth work shall be measured & paid for separately (ii) Road cutting/ floor cutting/ cutting holes etc in walls required for laying/ fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.

50 mm bore GI tube, light grade galvanised with clamp of 25 x3 flat iron for protection of cable , with all fitting lead in trenches /under road / with wall /in wall /pole /under floor where required complete all as specified and directed

Exhaust fan 300 mm sweep with louvers, steel bpdy including making of holes and making good the disturbed surface of wall including standered copper flexible twin core cable of size 23/0.0076 fixed as in repair complete all as specified and directed

Sand cushioning and cover (using local tibba sand), 80 mm thick before laying of cable and 150 mm thick after the cable is laid, complete all as specified and directed . (Note : 1. Approved local tibba dry sand after removal of vegetations, grass and other deleterious substances shall be used for sand cushioning and cover).

Jodhpur stone rough dressed slab, 40 mm to 50 mm thick, 25 cm to 35 cm wide and not less than 60 cm long dry abuttting each other for protection to under groung cable , complete all as specified and directed .

S K TRADER

M/S RAJASTHAN LABOUR SERVICE

M/S PIYUSH CONSTRUCTION COMPANY

prem enterprises

M/s RKG CONSTRUCTIONS

M/S SHREE AAINATH ENTERPRISES