REPAIRS TO VARIOUS TYPES OF JOINERY, FALSE CEILING, WALL PANELLING, DRAIN, FENCING, BOUNDARY WALL, PATH AND HARDSTANDING AND REPLACEMENT OF UNSERV WATER TANKS AND CLEANING AND DISINFECT SERVICE TANKS AT 9 BRD AF STN PUNE

Amount

Taking down and refixing in same opening of chowkats or frames not exc 1.5 sqm each complete all as specified and directed.

Taking down and refixing in same opening of chowkats or frames exc 1.5 sqm n exc 4 sqm each complete all as specified and directed.

Resecuring or easing & adjusting with out taking down of shutters of any description n exc 1 sqm each complete all as specified and directed.

Resecuring or easing & adjusting with out taking down of shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed

Taking down and refixing of shutters of any description n exc 1 sqm each in same opening complete all as specified and directed.

Taking down and refixing of shutters of any description exc 1 sqm and n exc 2 sqm each in same opening complete all as specified and directed.

Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 complete all as specified and directed.

Ditto all as per Ser Item No 7.00 above but exc 1.5 sqm and n exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chambered, put together with glue pinned at joints complete all as specified and directed.

Plain fillets exc 13 Sq cm but n.exc 25 Sqcm, square, rectangular or triangular in section clean sawn , secured with nails or braids of second class hard wood fixed in repairs complete all as specified and directed.

S&F 40 mm thick flush shutters, solid core with block board core and plywood face panels complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core with block board core and plywood face panels complete all as specified and directed.

S & F glazed and skeleton shutters, open rabated and prepared to receive glass gauge etc second class hard wood 35mm thick for door shutter complete all as specified and directed.

M & L for factory made solid PVC moulded door shutter , 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the foront face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed to wall complete all as specified and directed.

S&F Steel window with side hung shutters including Box type hinges with steel handle and steel peg stay, complete with glazing bars,dovetailed or welded complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregate as in bed blocks, bed blocks of hold fasts, coping and chamfered angles and throating etc. complete all as specified and directed.

S & F MS Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;hold fast ,railings; framework of water tanks and similar work conform complete all as specified and directed.

Hacking out old broken glass (any thickness ,size ,quality or description ) from wooden frames or stone ,concrete or brick surrounds ,glazed with putty or fixed with beabs complete all as specified and directed.

S & F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 125mm long complete all as specified and directed.

S&F aluminium, anodised barrel tower bolts of extruded section and fixed of size 200 mm long complete all as specified and directed.

S&F aluminium alloy , anodised sliding door bolt with hasp, Staple ( bolt type) and fixing clips of sheet , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed length of bolt 300mm complete all as specified and directed.

S&F 100mm butt hinges ,extruded aluminium alloy with galvanised mild steel hinge pin ,anodised and fixed ,type B-21 complete all as specified and directed.

M&L for 2 coats of synthetic enamel paint on wood and wood base surface of any description not otherwise described, over 10 cm width or girth over a coat of pink primer incl preparation of surfaces complete all as specified and directed.

Taking down aluminium door shutter and make good by doing necessary repair and refixing the same complete all as specified and directed.

Aluminum anodized door shutter with frame of size 62.5x37mmx1.5mm thick with one or more rebate consisting of 5mm thick tinted glass pane, aluminum shutter having top, middle and bottom rail of size 112mmx37mm including jointing cleats, glazing clips, rubber packing, anodized snap beading, , aluminum anodized fittings such as 200mm long tower bolt (2 Nos), 150mm hinges (3 Nos), suitable handles (2 Nos) mortice lock with 02 keys for each door complete all as directed including taking down of old wooden frame with shutter complete all as specified and directed.

Aluminum anodized door shutter without frame aluminum shutter having top, middle and bottom rail of size 112mmx37mm including jointing cleats, glazing clips, rubber packing, anodized snap beading, one or more rebate consisting of 5mm thick tinted glass pane, aluminum anodized fittings such as 200mm long tower bolt (2 Nos), 150mm hinges (3 Nos), suitable handles (2 Nos) mortice lock with 02 keys for each door complete all as directed including taking down of old wooden frame with shutter complete all as specified and directed.

S&F aluminum powder coated partition using ‘Jindal’ aluminum SP/DP section with 5mm thick tinted glass with PVC rubber bidding/12mm thick prelaminated particle board fixed with glazing clips etc/ both complete all as specified and directed. SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407

S&F aluminium powder coated three track sliding window with two shutters of 4mm thick tinted glass of modigaurd and one shutter of stainless steel wire mesh including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and directed. Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606,Interlocking – 20605, Top and bottom – 20604.

S&F standard aluminium section powder coated any colour as approved for door frames / shutters, window frames/shutters sliding/fixed and partitions etc including jointing cleat and rubber beading/linning, Pivot ,locking aragement and fixed in position with stainless steel screws complete all as specified and directed.

Fixing only aluminium section any colour as approved for door frames / shutters, window frames/shutters sliding/fixed and partitions etc including jointing cleat and rubber beading/linning and fixed in position with stainless steel screws complete all as specified and directed.

S&F in repairs aluminium Mortise lock vertical type, size 100 mm mild steel 4 levers complete all as specified and directed.

S&F aluminium (extrunded section) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised with hasp drawn steel spring, 140 mm over all length of cover plate in floor complete all as specified and directed.

S&F aluminium pivot set complete fixed in position in aluminium doors in repairs complete all as specified and directed.

S&F aluminium star lock for aluminium windows complete all as specified and directed.

S&F double action floor spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Ditto all as per Ser Item No 40.00 above but removing and refixing with oiling and greasing and necessary repair and fixing complete all as specified and directed.

M&L for 18/19mm thick pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to timber/aluminium frame work as in partitions etc complete all as specified and directed.

S& F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as directed including necessary preparation

M& L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed.

S& F Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete including taking down old gate complete all as specified and directed.

Taking down and Refixing only Collapsible steel gates of any type (obtained from Ser Item No 45.00 above) after making good & serviceable condition i.e. oiling, greasing & laths jointing complete all as specified and directed.

Taking down necessary parts of rolling shutters of any description area exc 4 sqm but n.exc 20 sqm each from brick/stone walls including top cover complete all as specified and directed.

Fixing only rolling shutters of any type (obtained from Ser Item No 47.00 above) after making good & serviceable condition i.e. roiling, greasing & laths jointing complete all as specified and directed. (Note Supply and fixing of any fittings or accessories required to replace shall be measured and paid separately).

S&F steel rolling shutters, without ball bearing manual type including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete with thickness of laths 1.25 mm complete all as specified and directed.

S&F steel rolling shutters, gear operated type with bevel gear box and crank handle including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete with thickness of laths 1.25 mm complete all as specified and directed.

S&F in repairs bevel gear box and crank hadle complete all as specified and directed.

S&F in repairs steel tention spring for rolling shutters complete all as specified and directed.

S&F in repairs ball bearing for rolling shutters complete all as specified and directed.

Supply of waste pipe for WHB/Sink complete all as specified and directed.

Demolition of brick work /stone masonry/pcc block masonry built in cement mortar of any description complete all as specified and directed.

M&L for pre-cast cement concrete block masonry Type C-I 1:3:6 (20 mm graded aggregate) with solid block ,exc 10cm in width and set in cement mortar 1:6 complete all as specified and directed.

Rendering 15mm thick in CM 1:4 with WPC finished even and smooth without using extra cement complete all as specified and directed.

Preparing on newly plastered surfaces and applying two coats of cement base paint over a coat of white wash complete all as specified and directed.

S&F in repairs 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof of any height,wall etc complete all as specified and directed.

S&F framed work as in doors or gates of angle or frames of truss other sections with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors, velly gutters etc confirming to grade Fe-410-O or Fe-310-O complete all as specified and directed.

Ditto all as per Ser Item No. 60.00 above but fabrication and errection only complete all as specified and directed.

M&L preparation of new steel surface of any description over 10 cm in width or girth, not other wise described with two coat synthetic enamel (ordinary tint) enamel paint over one coat of red oxide zinc chromate on steel surfaces complete all as specified and directed.

Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F aluminium snap grid powder coated frame work for false ceiling, size of grid 605 x 605mm along with 4mm dia mild steel wire class 3 as in suspenders complete all as specified and directed.

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level and removing demolished material out of Military station complete all as specified and directed.

Demolition of cement concrete in any description and any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), complete all as specified and directed.

Dismantling chain link fencing/expanded metal or mesh not exceeding 4kg/Sqm fixed in steel, wood fillets, concrete post etc. of any description complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling posts or struts (wood,steel or RCC)any section ,including taking out embedded in concrete or brickwork complete all as specified and directed.

Demolition of stone slabs and chequired tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of bricks (laid flat or on edge) or interlocking tiles in floors, channels, kerbes, aprons, etc laid dry of laid dry and pointed complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

Demolition of Brick/precast concrete block/Stone/boulder masonary walling built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed.

M&L for pre-cast reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq cm but n exc 250 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed.

Providing and fixing Precast cement concrete Type C1 1:3:6(20mm graded aggregate) in Framework for louvers and jallis, lintles, string courses, boundery pillers with plain fair faces including chamfers, weatherings, throating etc setting in CM 1:4 complete with joints to match complete all as specified and directed.

Providing and fixing Precast cement concrete louvers and jallies 25mm thick Type B0 1:2:4(20mm graded aggregate) (measured solid) set in cement mortar 1:4 ,including all moulding but excluding frame(pre cast frame shall be measured separately as Item above) complete all as specified and directed.

M&L form work to rough finished surface to sides of beams, sides and soffits (if any) of foundations and plinth beams and similar works: verticals or to batter complete all as specified and directed.

M&L form work to rough finished flat surfaces to sides of pillars, posts, struts, piers, columns ans stanchions complete all as specified and directed.

M&L RCC type B11:2:4 (20 mm grade aggregate ) in beams,plinth beams,Lintels etc,basement slabs , under reamed piles ad mass concrete complete all as specified and directed.

M&L RCC type B11:2:4 (20 mm grade aggregate )in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC Type B0 1:2:4 (12.5mm grade aggregate ) in Copings, kneelers, apex stons,Kerbs etc including weathering,slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for broken glass coping on top walls in cement mortar 1:3 including dimolition of old existing glass coping(if required) and removing the rubbish complete all as specified and directed.

Mild steel TMT bars10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.

Ditto all as per Srl Item No 85.00 above but 6 to 8mm dia as in stirups complete all as specified and directed.

S&F Mild steel ,plain,black sheet 0.8mm thick in wall cladding up to 10 Mtr height,steel gates and smilar work ,cut to size ,holes punched ; including round headed screws ,clout nails or reveted and fixed to wood or steel framing with plain 40mm lap joints with reveted or welded,seams including bending or turning up,mitred angles etc (Rate included for Scaffolding up to 10 Mtr height for cladding work and painting- paintng will be measured seperately) as requred complete all as specified and directed.

M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonary except solid blocks,exc.10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L random rubble stone masonary well bonded bedded solidily hearted in CM 1:4 complete all as specified and directed.

Ditto all as per Ser Item No 89.00 above but except stones complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick works finished even andfair without using extra cement in cement mortar 1: 4 complete all as specified and as directed

M&L for 15 mm thick rendering on stone masonry works or other than fair faces of brick work or concrete surface finished even and fair without using extra cement in cement mortar 1: 4 complete all as specified and as directed

M&L Flush pointing to random rubble,uncoursed or brought upto courses in CM 1:4 complete all as specified and as directed.

Supply and fixing mild steel work as in angle iron, flat iron of any size for post and struts as in fencing including, cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets for securing wire mesh ,chain link fencing etc including all necessary drilling bolting or riveting etc and/or fixing with screws, bolts etc. and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Ditto all as per Ser Item No 94.00 above but fixing only complete all as specified and as directed.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards,rails, straining bolts,etc.including provision of binding wire complete all as specified and as directed.

Supply only chain link MS galvanised fencing of size complete all as specified and as directed.

M&L for PCC type C-2, (1:3:6) , using 40mm graded crushed stone aggregate as in lean conc , sub base ,or mass conc , foundation filling etc. complete all as specified and as directed.

S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) incl removal of old unserviceable barbed wire complete all as specified and as directed.

S& F in repairs wire entanglements wth galvanised steel concertina coil reinforced with punched (chrome rajor of blade wire) barbed tape of 2.5mm thick galvanized steel sheet at 75mm saplings and core wire of dia 2.24mm high tensile steel wire complete all as specified and as directed.

M&L for preparation of new plastered wall surface of any description and applayng two coat of cement based paint over a coat of chalk whiting complete all as specified and as directed.

M&L for preperation of old plastered wall surface of any description and applayng one coat of cement based paint complete all as specified and as directed.

M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc. complete all as specified and as directed.

M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickiness M-35 grade complete all as specified and as directed.

M&L sand filling (50 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and as directed.

M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in floors ,plinth protection and pavings finished with spike rolling to surface or making impressions of expanded metal ,whilst the concrete is green complete all as specified and as directed.

M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection complete all as specified and as directed.

M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc. complete all as specified and as directed.

M&L PCC 1:2:4, 25 mm thick type B0 using 12.5mm graded stone aggregate as in floor finished even and fair with out using extra cement complete all as specified and as directed.

M&L for Chequered cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6) complete all as specified and as directed.

M&l for PCC type D-2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation complete all as specified and as directed.

M&L dressed granite or trap /Precast cement concrete type C2 (1:3:6) (12.5 mm nominal size of graded course aggregate) Kerb stones roughly squared/rectangular pieces of minimum thickness 15cm and height 30 cm ,so that the maximum depression from a straight edge held against the dressed surface shall noot exceed 6mm for top and exposed surfaces of sides and 15mm for the rest of surfaces jointed in cement mortar 1:6 and struck finish ( rate included for removal of old damaged curb stones of any description).

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia complete all as specified and as directed.

M&L for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors in repairs complete all as specified and as directed.

M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs complete all as specified and as directed.

M&L for cutting chases, pinning in making good to face for concealed water tubing complete all as specified and as directed.

Disconnecting existing water tank exc 500 ltr and n exc 1000 ltrs, setting aside (for lowering if required) for repair cleaning, removing all scale and dirt etc from tanks and from mouth of circulatring pipes and re-fixing in position complete all as specified and as directed.

Ditto all as per Ser Item No 118.00 above but exc 250 and n.exc 500ltr capacity complete all as specified and as directed.

Cleaning and removing all scale and dirt ,etc ,from tanks exc. 500 ltr and nexc. 1000 ltr capacity and from mouths of circulating pipes ,etc complete all as specified and as directed.

Cleaning and removing all scale and dirt ,etc ,from tanks exc. 250 ltr and nexc.500 ltr capacity and from mouths of circulating pipes ,etc complete all as specified and as directed.

Dismantling stone slabs or roof treatment (tarfelt treatment)of any description in suspended slabs in roofs,suspended floors, chajjas, landings etc,including cement mortar, bedding (But not backing ) and rubbish of premises complete all as specified and as directed.

Demolition of cement concrete unreinforced (other than ground floor)Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

Roughening surface of old concrete floor by piking ,sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed.

M&L cutting out cracks to V-section in existing roof slab or terrace, cleaning out, wetting, grouting, with cement sand slurry in 1:3 with mixing of liquid WPC by wt of cement (as per manufacturer instruction) complete all as specified and as directed.

M&L for brushing neat cement slurry with 3.0 Kg of cement per Sq.meter. complete all as specified and as directed.

M&L PCC (1:2:4) type B0, (12.5mm graded aggregate) padding in averaging on RCC roof slab or terrace including finishing even & smooth with using extra cement, include for use of formwork complete all as specified and as directed.

M&L rendering or screed bed 10 mm thick in CM 1:3 in averaging on RCC roof slab/terrace surfaces with mixing of WPC with cement (as per manufacturer instruction) including finishing even and smooth without using cement complete all as specified and as directed.

Supply only Integral water proofing compound complete all as specified and as directed.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt reinforcement not less than 150 gms/sqm) laid on primed surfaced application including preperation and applaying two coats of Heat resisting Aluminium paint over APP Membrane complete all as apecified and directed.

Dismantling of PVC water tanks of 500 ltr capacity and removing to store complete all as specified and as directed.

Dismantling of PVC water tanks of 1000 ltr capacity removing to store and complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank of 1000 ltr capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and as directed.

S & F Ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule fixed in repairs 20mm dia complete all as specified and as directed.

S & F in repair PVC low level flushing system plastic valve with inlet ball valve float chain and ball (of capacity 10 liters) ISI Marked incl 32mm PVC flush pipe complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, 550 mm x 400 mm flat back, including providing CI brackets, CP Pillar Tap, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, 32 mm dia complete all as specified and as directed.

Material and labour 10mm thick rendering in cement mortar 1:4 as in sunken portion mixed with water proofing compound 3% by weight of cement, finishing surfaces even & smooth without using extra cement complete all as specified and as directed. (Note water proofing compound shall be measured and paid under appropriate item)

Material and labour for bitumen blown any grade applied hot two coats to concrete surfaces at the rate of 1.5Kg per sqm per coat complete all as specified and as directed.

Material and labour for Lime concrete (1:3) using 40mm graded brick bats aggregate as in floor of sunken and mass concrete complete all as specified and directed.

S&F stainless steel fancy type curtain rod 20 mm bore complete all as specified and as directed.

S&F aluminium powder coated fancy type decorative brackets suitable for 25 mm dia curtain rod (minimum projection from wall 75 mm ) fixed to wall including drilling, rawl plug, screws etc complete all as specified and as directed.

S&F in repair 10mm thick corner glass with railing with D bracket complete all as specified and as directed.

S&F in repair 12mm thick corner glass with railing with D bracket complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Ditto all as per Ser Item No 146.00 above but 110mm dia complete all as specified and as directed.

M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia complete all as specified and as directed.

Ditto all as per Ser Item No 148.00 above but 110mm dia complete all as specified and as directed.

M&L PVC (SWR) branch piece single (single ‘Y’) equal or unequal with oval access door suitable for 75mm bore pipe with access door complete all as specified and as directed.

M&L for PVC (SWR) vent cowl of 110mm dia complete all as specified and as directed.

S&F in repair cast iron Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

M&L(SWG) gully trap 150mm setting and jointing with solvent cement complete all as specified and as directed.

Refixing GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors in repairs complete all as specified and as directed.

Refixing for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs complete all as specified and as directed.

S&F in repair 500 Ltr PVC Water Tank Cover complete all as specified and as directed.

S&F in repair CP Brass shower arm with shower rose 15mm complete all as specified and as directed.

M&L for providing and fixing toilet fittings brass chromium plated for Health faucet complete all as specified and as directed.

M&L for Brass CP Basin mixer 15 mm bore for hot & cold water screwed down for iron pipe fixed in repairs complete all as specified and directed

S&F in repair for 15 mm dia CP pillar tap CP cast copper alloy complete all as specified and directed

S&F in repair 15 mm dia CP brass PVC connection 45 cm long including check nuts etc complete all as specified and directed

M&L for 15 mm bore bib tap chromium plated cast copper alloy with wall flange complete all as specified and directed

S&F in repair Overhead shower 200x200mm square shape single flow (ABS Body Chrome plated with gray face plate) with Rubit cleaning system complete all as specified and as directed.

M&L for providing and fixing toilet fittings complete all as specified and as directed.

Angular stop cock

Two way bib cock with wall flange 15mm dia

Toilet paper holder

RK ENTERPRISES

Smruti Construction

S.R.M.K Enterprises