Development of sector 17 and festival event ground at Temi in South Sikkim

Amount

Dismantling of Cement Concrete Pavement (Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately)

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.

Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 metres.

Earthwork in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains ( not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal od surplus excavated soil as directed within a lead of 50m all kind of soil.

a) all kinds of soil 50%

b) ordinary rock 50%

Filling inside plinth in building works with 23cm layers, consolidated to 15cm including watering, ramming etc, all complete. (stone filling )

mixed filling

Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete.1:2:4 mix. (1 cement, 2 coarse sand, 4 stone aggregate of 20mm & down size)

Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete.1:3:6 mix. (1 cement, 3 coarse sand, 6 stone aggregate of 20mm & down size)

Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete.1:3:6 mix. (1 cement, 3 coarse sand, 6 stone aggregate of 40mm & down size)

Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements. 1:1.5:3

Supplying, bending and placing in position tor- steel reinforcement in all R.C.C works including cost of binding wires, all complete.

Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber)

Foundation, footings base

columns

Foundation, footings base

Providing and Laying Plum concrete in 1:4:8 c.c. (1cement, 4 coarse sand, 8 clean hard graded stone chips of 40 mm down nominal gauge) with 50% clean hard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge.

Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 50% clean hard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge.

Providing, fitting and fixing 38mm flooring in local timber equivalent to champ and panisaz and base frame in timber equivalent to katus excluding the cost of polishing and including the cost of one coat priming on the base frame complete.

Providing, fitting and fixing 25-30mm thick Concrete Paver tiles according to the Engineeer-in-charge, all complete.

Fencing with welded steel wire Fabric 75 mm x 50 mm (Suggestive) (Providing 1.20 metre high fencing with angle iron posts 50 mm x 50 mm x 6 mm at 3 metre center to center with 0.40 metre embedded in M15 grade cement concrete, corner, end and every 10th post to be strutted, provided with welded steel wire fabric of 75 mm x 50 mm mesh or 75 mm x 25 mm mesh and fixed to iron posts by flat iron 50 x 5 mm and bolts etc. complete in all respects.)

Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete.

Providing and Laying 12mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing complete.

Providing and laying plaster of paris putty of 2mm thick over lastered surface to prepare the surface even and smooth all complete:

Providing and Laying. 40 mm thick Red oxide flooring with under layer 30mm thick c.c. 1:2:4 and top layer of 10mm thick plaster of red oxide and cement mix cement mortar 1:3 finished with a floating coat of neat similar cement red oxide mix including cement slurry, rounding of junction all complete:

Providing, fitting and fixing 38mm flooring in sal timber over a frame of sal timber excluding the cost of polishing and including cost of one coat priming on the base frame complete. With Imported timber from outside the state/ WOOD PLASTIC COMPOSITE (WPC) all complete)

Providing and laying 40mm thick mosaic flooring medium shade pigment with ordinary cement 50% and white cement 50% rubbed and polished with under layer of c.c. 1:2:4 (1cement, 2coarse sand, 4graded stone aggregate of 12.50mm size) and top layer of marble chips laid in cement marble powder mix 3:1(3cement, 1marble powder) by weight in proportion of 4:7 ( 4 cement marble powder mix : 7 marble chips) by volume including cement slurry, pigments curing etc. all etc complete.

Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.

Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm Special colour(black, burgundy, pink, midnight blue, alpine blue or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.

Providing and Laying white or colored glazed tiles anti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.

Providing and Laying. 25mm thick kota stone slab flooring over 20mm thick 1:4 cm base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete.

providing and laying flloring with granite marbel stone slab 20 mm thic granite stone slab flooring of size not less then 1.0 sqm cement concrete and joint treated with white cement , mixed with matching pigment , curing i/c rubbing to give a granite finish , as per the direction ofengineer incharge .

Extra for marble stone flooring for treads of steps.

Extra for nosing in marbel stone for treads

Providing, fitting and fixing of dressed sal timber in all types of frames complete with locally available timber

Providing, fitting and fixing 25 mm thick false ceiling / paneling of dhupi or local timber in timber frames of timber equivalent to Katus or pakhs saaj or equivalent excluding the cost of polishing and including cost of one coat priming on unexposed frame

Providing, fitting and fixing 25mmx50mm dressed ceiling, beads in timber equivalent to rani champ or panisaz or same quality of timber used in ceiling work all complete

Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent including steel butt hinges screws 32mm thick panels etc complete.

Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete.

Supplying, fitting & fixing powder coated(white) anodized alluminium works casement window and sliding combination all complete.

Providing / Fitting / Fixing artificial thatch roof including transportation, labour, materials , taxes etc. complete

Supplying, fitting & fixing of Stainless Steel(SS) roofing according to the Engineer-in-Charge, all complete.

Providing and fixing tower bolts 300x10mm (Barrel type) with necessary screws etc complete.

Providing, fitting and fixing handles 125mm size with necessary screws etc complete.

Providing and fixing 100mm mortise lock with 6 levers and pair of handles with necessary screws etc complete.

Providing, fitting and fixing sliding door bolts with nuts and screws etc. complete. Brass (Chromium Plated)

Providing, fitting, fixing of 24 BWG GCI sheet roofing with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with epoxy (8 to 10 gm per bolt) in each bolts including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete.

Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Galvanized Sheet fixed with G.I, J or L hooks bolts & nuts 8mm dia filled with epoxy in each bolts (8 to 10 gm per bolt), Limpets, Bitumen washers complete.

Providing, fitting and fixing 200mm x 25mm eaves board in dressed sal timber with 50mmx25mm beads in the same timber.

Providing, fitting and fixing eaves board with decorative traditional cut out including laour material and taxes

Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Charge all complete.

Providing and applying priming coat with ready mixed Red oxide, Zinc chromate primer on steel / galvanized Iron steel works including preparation of the surface complete.

Providing and French spirit polishing one or more coats including cleaning of the surface of dirt and dust papered smooth etc on old surface complete.

Providing and Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete.

Providing and washing with three or more coats of snowcem, durocem, cemcote etc. of approved quality and manufacture on exterior walls to give an even shade including preparation of surface on New surface complete.

Providing U shaped drain of 23cm (ht) x 23 cm (width) of internal dimension with 1:2:4 Plum concrete (40mm & down) side wall thickness of 23 cm on both side with 1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including 1:3 cement plaster with neat cement polishing & rounding of junction, as per the direction of the Engineer in Charge.

Tubular Steel Railing on Medium Weight steel channel ( ISMC series) 100 mm x 50 mm (Providing, fixing and erecting 50 mm dia steel pipe railing in 3 rows duly painted on medium weight steel channels (ISMC series) 100 mm x 50 mm, 1.2 metres high above ground, 2 m centre to centre, complete as per approved drawings)

Compacting original ground supporting subgrade (Loosening of the ground upto a level of500 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of table 300-2 for subgrade construction.)

turfing with sods Furnishing and laying of the live sods of perennial turf forming grass on embankment slope, verges or other locations shown on the drawing or as directed by the engineer including preparation of ground, fetching of sods and watering.

Providing, fitting and fixing 300mmx300mmx25mm thick premixed Concrete chequered tiles (nine box antiskid) according to the Engineeer-in-charge, all complete.

Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.)

Grading- I

Grading- II

Grading- III

Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate shown in 500-1 using mechanical means.)Medium Porosity

Bituminous Macadam (Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction)for Grading-II (19 mm nominal size)

Tack coat (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at required rate on the prepared bituminous/granular surface cleaned with mechanical broom.) Normal Bituminous Surface

Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects)

Carriage of non stock materials within 30 Km.Stone

Carriage of non stock materials within 30 Km:Stone aggregates

Carriage of non stock materials within 30 K.m:Sand

Carriage of stock materials within 30 Km:Cement and Steel

Carriage of non stock materials within 30 K.m:Bitumen

Loading and Unloading of Boulders by Manual Means Stone,Sand and Stone chips

Loading and Unloading of Cement or Steel by Manual Means and Stacking.

Head load of stock materials for a distance beyond 30 m and within 100 m distance.

Head load of non-stock materials for a distance beyond 30 m and within 100 m distance

Structure design

Structure design

Structure design

Structure design

Structure design

Providing, fitting and fixing soil waste and vent pipes including testing etc complete.

100 mm dia. PRINCE / SUPREME or equivalent soil pipe

75 mm dia. PRINCE / SUPREME soil Pipe

Providing fitting and fixing manholes on septic tank

Providing, fitting and fixing bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes.

100 mm dia. Supreme / Prince

75 mm dia. Supreme / Prince

Providing, Fitting and fixing GI pipe of medium class, (excluding trenching, refilling, compacting and the cost of fittings) all complete

15 mm dia G I pipe

25mm dia G I pipe

P/F/F tee of 100mmx100mmx100mm required degree with access door, insertion rubber wash 3mm thick bolts and nuts all complete

P/F/F tee of 75mmx75mmx75mm required degree with access door, insertion rubber wash 3mm thick bolts and nuts all complete

P/F/F CPVC pipes medium class complete including cutting and making good the walls etc. exposed on wall (internal works) excluding the cost of fitting all complete 15mm dia

cost of CPVC 15mm and 25mm dia fittings i/c elbows, bends tee, socket etc 20%

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT)

BIB COCK 15 MM DIA

STOP COCK 15 MM DIA (CONCEALED WORKS)

Angular stop cock

Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:.

Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete.

porcelain soap dish

Basin Mixture

Sanitary Faucet

P/F/F of floor trap

Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete. 740 x 20 mm

Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sinter or equivalent) 2000 LITERS CAPACITY

Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan W.C. pan European Bidets constellation CAT NO 30006

Providing, fitting and fixing Special needs toilet good quality according to the engineer in charge all complete.

Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE (63 cm x 45 cm)

P/F stain less steel kitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required.

Providing, fitting and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size 440x315x325 mm with 5 ltr automatic flushing cistern with C.I. brackets, GI flush pipe and spreaders with brass unions and G.I. clamps including cutting and making good the walls and floors as required all complete:

Range of 1 Urinal basin.

Filter 1000 mm dia x 1400 mm height, Bobbin wound FRP Top mounted complete with 6 way MPV, pressure guage, distribution system and media (400 Kg) complete in all respect. Pool Pump - 3 HP with built in pre filter, Asynchrounous, 2 pole, monoblock, class F insulation and IP55 rating and built in thermal protection. Pump body, foot and diffuser to be glass loaded polypropylene, PPO impeller, Seal mounting in glass loaded polyamide,Motor Shaft – SS AISI 420. UV System 6 Tube, SS 316 , 2 Bar, 230 V AC 50 Hz, Lamp Type UVC. Starter panel Suitable for operations of all pumps and motors with suitable protection and indication (individual for each pump/motor)

PVC pipes for entire plumbing work with 50mm and 75mm Dia, 10Kg grade agricultural pipe complete with fittings, valves and connections. Main Drain trap of 9” dia, 2” side connection with top grill complete in all respect. Floor Inlet nozzle of 2.50 lps, with 2” connection. Suction Nozzle of 1.10 lps, Eye Ball type with 2” connection. Vaccuum point suction nozzle of 2.5 lps with 2” connection hollow center fitting suitable for pool suction hose.

Junction Box with openable front plate IP 65 with metric knockouts Hensel D9245 complete in all respect. Electrical wiring and control cabling including pumping station complete with FRLS copper wire in PVC /MS conduit including earthing, control panel etc. Pool LED Light 24 V DC,20 W, SMD, 120 d angle, SS 304-316 frame with 12 mm face protrude, IP 68 Rated complete with 1.5 mtrs connecting wires and driver of appropriate capacity. LED Strip Light 5 mtr length,single colour (white/green/amber/blue), IP 65 rated, 8wt /mtr.with suitable driver 10 mtrs long.

Jacuzzi Tee body and combination of swril and standard jet, 40 set (5 for each seat.2 in shoulders,1 at spine and 2 for calves ) with 8 sets air button and air controller + 4 sets pneumatic switch complete in all respect.with 50 mm water and 32 mm air inlets and centre jets with 16 mm outlets. Jacuzzi Pump - 3 HP single stage, self priming centrifugal pump High Flow, without pre filter, 2 pole, monoblock, class F insulation and IP55 rating. pump body and foot are of glass loaded poly propylene, PPO impeller,Seal mounting – glass loaded polyamide, Motor Shaft – SS AISI 420 (one for each seat). Vortex / Ring type Air Blower 3 HP ,Non Oil Lubricating, Metal Body as per standard specs.

Ladder 3 tread SS 316,u shape ,side rail dia 42 mm

Maintenance Accessories - Vaccuum Head Alumimium/SS 316 24” width with bristles and wheels, Wall Brush, Algae Brush 18”,Curved/straight back PVC with PVC bristles, Telescopic handle 4.8 Mtr, anodised aluminium with PVC ends, Leaf Bag Deep Net Type with clip for aluminium handle, Hose 30 Mtr, UV Protected, LLDPE ,floating type,with PVC cuffs, Test Kit Liquid reagent based pH and CL test kit with 15 ml reagent complete in all respect

Installation,testing and commissioning of Heat pump for swiming pool rated at 15 KW - 18 KW of input power and 65 - 70 KW of output power. Refrigerant used should be environment friendly R-410a, heat pump will be three phase 440 v, 50 Hz with copland compressor to heat water upto 32-35 C. Heat pump will have an inbuilt cycle for defrosting in case icing occurs on evaporator. Initial Water Temperature at Pool : 6°C Desired Hot water Temperature at Pool : 24°C Ambient Temperature : 1°C Initial Heating time : 72 Hrs. Pool Volume : 70 Cum. Pool Area (Fully exposed to ambient) Dimensions of the unit are – 1600mm x850mm x1500mm side discharge/ top discharge.

Bubble Pool Cover 5 Mic HDPE 2000 sqft

1.2.5% electrical on applicable component as per DPR @ 12%

5% External water supply on applicable components as per DPR @ 12%

MUKESH AGARWAL

Ravi Agarwal