Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹14.5 LAccepted-AOC | 1 | Accepted-AOC Being L1 | |
| 2 | 2₹17.0 L+₹2.4 L (16.4%)Rejected-Finance 02 JAMEEWAR COMPLEX RING ROAD HANUMAN NAGAR GONDIA MAHARASHTRA 441614 | GONDIA | MAHARASHTRA | 441614 | 2 | Rejected-Finance Being other than L1 | |
| 3 | 3₹17.8 L+₹3.1 L (21.5%)Rejected-Finance 41B 1H JAYANTIPUR PREETAM NAGAR ALLAHABAD | 3 | Rejected-Finance Being other than L1 | |
| 4 | 4₹18.0 L+₹3.4 L (23.3%)Rejected-Finance | 4 | Rejected-Finance Being other than L1 | |
| 5 | 5₹18.5 L+₹3.8 L (26.2%)Rejected-Finance HOUSE NO 39 KRISHNA VIHAR OPPOSITE KV AIR FORCE MANAURI DISTT PRAYAGRAJ UP 212208 | PRAYAGRAJ | UTTAR PRADESH | 212208 | 5 | Rejected-Finance Being other than L1 |
Tender Value
₹19.4 L
EMD Value
₹38,800
Closing Date
8 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Sharath Ravindran CWE
HQ CWE (AF) Chakeri Kanpur
PROVN OF WEATHER SHELTER AND ALLIED WORKS AT SUB GUARD ROOM AT 24 ED MANAURI
2024_MES_644884_1
CWE(AF)/CHK/MNR/T-56 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
AGE (I) AF Manauri
Please refer tender documents
7 documents required · 7 mandatory
₹500
AGE (I) AF Manauri
₹38,800
8 May 2024
2 Mar 2024
16 Apr 2024
2 Mar 2024
8 Apr 2024
25 Mar 2024
Amount
Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out as in hard/dense soil complete all as specified
Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25cm or part for hard/dense soil complete all as specified and directed.
Removing of excavated surplus soil to a distance not exceeding 500 metre but not exceeding 1000 metre and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate,as in foundation, filling & mass concrete complete all as specified and directed by Engr-in-charge.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, as in soft/loose soil complete all as specified and directed by Engr-in-charge.
M&L for Reinforced cement concrete M-25 (design mix) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; including necessary formwork complete all as specified and directed by Engr-in-charge.
M&L for 75mm thick, PCC 1:4:8 type D-2 using 40mm graded stone aggregate, as in sub base etc complete all as specified and directed by Engr-in-charge.
M & L for precast hydraulic pressed glossy finish interlocking paver block any shape and size glossy finish with and including 50 mm thick sand filling as in sand cushioning below interlocking tilesconfirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.
M&L for 100 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finished even and smooth without using extra cement complete all as specified and directed .
M&L for Steel work in tubular trusses/vertical post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed . Note: The rate shall deemed to be included for specific curvature/design for steel tubes and other similar member, truss etc.
M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, Diameter of neck exc 16 mm but n exc 20mm, length of bolt exc 5 cm but not exc 10 cm long complete all as specified and directed.
S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes attachment with riveted, bolted or welded Fe 410-W (Gde E-250) quality-A complete all as specified and directed
M & L for preparation of new steel surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridges and valley gutters,fixed with self tapping screws as specified and directed.
S&F aluminium composite panel overall 4mm thick panel, aluminium sheet thickness 0.5mm minimum width 1.22 metre, minimum length 2.44 metre wight 5.5 Kg/Sqm external faces coil coated with PVDF and internal face coil coated polyster for cladding wall, column, beams and ceiling etc fixed with and including to frame work as per manufacturer's instructions complete as specified and directed. Note : Colour of ACP shall be approved by AGE(I).
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for Brickwork with flyash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
Taking down cement plaster or cement lime plaster on brick or stone walls etc.Including raking out joints ,hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces as in ceiling in Cement mortar 1:3 and finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new surface of ceiling and applying three coats of whitewash complete all as specified and directed.
M&L for preparation of old surface of ceiling and applying two coats of whitewash complete all as specified and directed.
M & L for complete removal of existing treatment on walls, applying wall care putty not less than 2mm thick on old plastered surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M & L for rendering 15 mm thick in cement plaster 1 : 4 mixed with liquid water proofing chemical (@ 200 ml per bag of cement) on fair faces of brick work or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and directed. Note:- liquid water proofing chemical shall be measured & paid seprately.
Supply only liquid waterproofing chemical complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces as in walls in Cement mortar 1:6 and finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new surface of wall , applying wall care putty not less than 2mm thick on new plastered surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
M&L for powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S & F sheet glass 5 mm thick tinted shade ordinary quality glazing with rubber gasket in squares complete all as specified & directed.
M&L for powder coated aluminium grill for window/ventilators of approved design and pattern with approved section fixed to the window frame complete all as specified and as directed by Engineer in Charge.
M&L for 20-25 mm thick granite work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering coat in CM 1:4 complete all as specified and directed by Engineer in Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .
M & L for coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M & L for coloured Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed .
M & L for coloured glazed ceramic coloured tiles 300x600x7mm thick with colour & design as per direction of Engr in charge fixed as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick in cement plaster 1:4 as backing coat for fixing tiles complete all as specified and directed .
Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each and removing from site complete all as specified and directed .
S&F PVC solid door frame of size 50X47mm factory made out of 5.0mm but wood grain printed PVC sheet used instead of Plain colour PVC sheet reinforced with mild steel square tube as specified and as per manufacturer's instructions complete all as specified and directed.
S&F factory made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing as per specifications and drawings, complete all as specified and directed.
S&F in repair for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed.
S&F in repair for Hasp and staple, safety type,aluminium anodised including bolt to hinge plate and fixed with screws all as specified and directed.
S & F in repair Vitreous China white urinal of size 325x310x420mm complete including providing and fixing plugs bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal in back of cement including connecting to flushing pipe and outgoing pipe etc compete all as specified and directed.
S & F in repair Vitreous China wash down water closet pan (pedestal pattern) white colour (pedestal pattern), with seat cover,flushing pipe 32mm dia for low level flushing cistern including padestal pan & trap,including connection to drain and to flushing pipe anti syphonage pipe etc compete all as specified and directed.
S & F in repair vireous china WHB white colour of size 550x450mm flat back or angle back type including angle iron bracket waste coupling PVC waste pipe 32mm dia 60cm long fixed pinning in ends of brackets complete all as specified and directed.
S&F in repair for looking mirror fancy type decorative pattern 5 to 6 mm thick fixed on wall with stainless steel studs complete all as specified and directed.
S&F of 125 mm long barrel tower bolt aluminium anodised of extruded section complete all as specified and directed.
S&F of 250 mm long aluminium anodised sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F Butt hinges, medium weight, cold rolled mild steel, and fixed 100mm long complete all as specified and directed .
S&F in repair angle valve 15 mm dia chromium plated cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair 15mm bore Bib taps, cast copper alloy chromium plated with capstan head screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.
S&F in repair SS Soap dish (160x160x90mm), any type, fixed to plugs with chromium plated plugs with brass screws compete all as specified and directed.
S&F in repair waste pipe for wash hand basin 32/40mm dia compete all as specified and directed.
S&F in repairs 15mm bore Pillar taps, chromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.
M&L for precast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab for manhole or similar works set in CM 1:6 compete all as specified and as directed by Engineer in Charge.(Note: Reinforcement shall be measured and paid separately).
M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for Mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for aluminium die cast body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed.
M/S R S Traders
Bharat Trading Company
M/s Vivek Traders
AMRESH TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .