ESTIMATE FOR CONSTRUCTION OF 4 NO. PONDS AND PROVIDING CANAL WATER TO PONDS UNDER KANDI CANAL 3 DIVISION HOSHIARPUR

Jungle clearance

Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines,grades and cross sections,including all lifts and combined lead upto 30m.

Dressing bed and preparation of sub grade for lining.

1.8 meter high G.I. barbed wire fencing with 2.4 meter angle iron posts 50x50x6mm placed every 3 meters centre to centre 0.6 meter below ground level, every 15th post, end post, corner post suitably strutted and provided with 12 horizontal lines and two diagonals interwoven with horizontal wires fixed with GI staples, turn buckles etc. including foundation concrete 1:2:4 of size 0.30x0.30x0.75m for each post complete as per technical clause 808 of MORT&H specifications

Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing :-allowances, lead and dressing : depth 0 upto 1.5 meter

Brick lining 75 mm thick in 1:3 cement, sand morta rover LDPE over dressed sub-grade with 15mm thick sand cushion in bed for trapezoidal On side slopes.

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. Earth work upto 1.5 m. Depth for All classes of soil except rocky

Providing,Laying, fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting, jointing and testing complete as per specifications160mm o/d PVC pipe of 2.5Kgf./ sqcm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). Class PN-1 as per ISI 150mm i/d Sluice Valves flanged

LED Based SPV Street Lightening System 12 watt, 75 watt SPV module 12.8v- 30 ah, lithium ferro phosphate battery (>2000 cycle) 6 mtr hot dipped GI pole 76.1 mm od, 3.6 mm thick & 38 kg weight (+10) 70 Micron Zinc coated