Providing ,Installation ,Testing and commissioning of submersible Pumpset 1no having specification 15000 GPH X 150 Mtrs head each along-with allied works at Tubewell Roop Nagar Stage II

Providing, Installation, testing and commissioning of 1 no. submersible pump set having specifications 15000 GPH x 150 Mtrs. head each along with allied works at Tube Well Roop Nagar stage II. Shifting of the new submersible pump set from place of storing to workshop. Fabrication of and fitting of U-shaped tie rod/clamp which is to be fabricated out of MS flat to be fitted with submersible pump by fabrication and fitting of bolts and nuts which are to be welded on both sides of the clamp. The job also includes fabrication of expander/reducer nipple for NRV of required size which is to be fabricated out of MS plate threaded at one end flanged at the other end. Fitting of reducer/expander nipple to be fastened with column pipe at one end with flange joint and with the discharge outlet (NRV) of the submersible pump at the other end. Coupling of submersible pump-set and testing it in pit at workshop and shifting to site of work. Installation, testing and commissioning of submersible pump set extracting of already lowered pump set along with worn out submersible cable and column pipes. Providing and fitting of 16 mm sq. submersible cable 250 Mtrs in length for replacing worn out submersible cable. Making of all connections with LT control panel and then testing the pumpset transformer by way of excavation of pit of size 4' x 3' x 6' depth near to tube well for earthing of pumping machinery. Job includes disposal of dismantled/excavated debris of permissible dumping place by manual labour, cleaning of excavated pits properly. Providing and laying of copper earthing plate 600 x 600 x 6mm. Providing and fixing copper strips (25 x 6 mm) earthing upto ground level. Providing and filling of charcoal and salt in alternate layers for proper earthing and filling of excavated pits with good earth. Providing and laying of ½" dia. Gl pipes with funnels on upper side above ground level for watering purposes. Earthing of voltage stabilizer,panel and transformer by using copper strips 25x6mmproperly tightened with nuts and bolts. the left out space. Job also includes design fabrication and fitting of sheet around the tubewell casing to cover the left out space. Clearing of area around the tube well casing by excavation of earth and disposing the excavated material at a permitted place. Providing and fixing of heavy duty sheet on the floor to avoid electric shocks during the maintenance work. The sheet must be electric shock proof, fire proof and heavy duty to bear the variable loads of pump motor set, column pipes and labor using heavy duty hinges so that the sheet can be lifted safely in case the gravel needs to be filled again. The job includes cost of submersible pump set, lowering of submersible pump set, submersible cable, materials i.e. tie rod, expander, reducer, nipple, nuts, bolts, rubber sheets and labour charges. Complete Job.