Special Repairs to Bldg No P-18/1 to 16 ORs FAFA accn Nagarwala Road of Station HQ in the area of AGE B/R II under GE (N) Ahmednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortar etc complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm in thickness (below or above ground level) etc complete all as specified and directed by Engineer-in-Charge

M&L rough dressed shahabad stone 25 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6) and pointed in neat cement slurry etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified ceramic coloured tiles SSR series of Johnson / FT Series of Orient-Bell / Duro Cotto Series of Nitco or equivalent in makes as specified in list of makes in Appendix `C', 8-10 mm thick as approved by GE (square / rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set & jointed in neat cement slurry and pointed in white or coloured to match the shade of the tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified anti skid ceramic coloured tiles, 7-8mm thick matching to data tiles area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge

M&L for Glazed ceramic coloured tiles as in vertical surfaces 300x200x7mm thick laid over and including 15mm rendering in cement and sand mortar (1:4) set and jointed in neat cement slurry and and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate, 75mm thick as in sub base etc complete all as specified and directed by Engineer-in-Charge

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets as in roof covering of any gauge or any thickness etc complete all as specified and directed by Engineer-in-Charge

M&L for 6mm thick asbestos cement (corrugated or semi corrugated) sheets as in roof, walls etc fixed with `L' or `J' type hook or bolts etc complete all as specified and directed by Engineer-in-Charge

S&F asbestos cement plain angular ridge 6 mm thick fixed with `L' type or `J' type or cranked hook bolts etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick/stone walls including taking out joints hacking for keys, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

M&L rendering 15mm thick in cement and sand mortar (1:6) on brick or concrete surface finishing even and smooth.(without using extra cement) etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of newly plastered surface and applying two coats of OBD over a coat of chalk whitenining etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of newly plastered surface and applying two coats of white wash etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old plastered surface of wall and applying two coat of oil bound distemper over one coat of chalk whiting incl complete removal of existing treatment etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old decorated surface and applying one coat of white wash on ceiling etc complete all as specified and directed by Engineer-in-Charge

Dismantling of timber scantlings 40 Sq. cm and over in section, in any position as in framed work etc complete all as specified and directed by Engineer-in-Charge

Material and labour for second class hard-wood clean swan in scantlings (framed) etc complete all as specified and directed by Engineer-in-Charge

Raking out joints/ pointing built in cement and sand mortar to random or polygonal rubble, uncoursed or brought upto courses etc complete all as specified and directed by Engineer-in-Charge

M& L Keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stonework and precast concrete block walling etc complete all as specified and directed by Engineer-in-Charge

M&L for precast cement concrete solid block masonry (1:3:6) mix type C-1 using 20mm graded stone aggregate exceeding 10cm width, built & set in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from the frames) alletc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35mm thick second class hard wood plain framed factory made paneled shutters, two panel with lock rail and panel of 9mm BWP commercial plywood . The size of rail and style as per IS 1003 (Part I) kiln seasoned and chemically pressured treated etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitered beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of new surfaces of wood and applying two coats of synthetic enamel paint over a coat of pink primer, of any description, not otherwise described, over 10 cm width or girth etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old wooden surface and applying one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing etc complete all as specified and directed by Engineer-in-Charge

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge

Supply and fix galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge

M & L second class hardwood Plain fillets. Square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 Sqcm but n,exc 25 Sqcm etc complete all as specified and directed by Engineer-in-Charge

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of new steel/steel ornamental and iron surfaces of any description not exceeding 10cm in width or girth and applying two coat of synthetic enameled paint over one priming coat of red oxide etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of old treated steel/steel ornamental and iron surfaces of any description not exceeding 10cm in width or girth and applying one coat of synthetic enameled paint etc complete all as specified and directed by Engineer-in-Charge

S&F butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodised and fixed type C 21 size of hinge 100 mm etc complete all as specified and directed by Engineer-in-Charge

S & F Mild steel 300 mm long, ordinary rat tail rod pattern springs, including roller and roller plate etc complete all as specified and directed by Engineer-in-Charge

All as per item No 39 (here-in-before) but in repair

S & F 150 mm long extruded aluminium alloy handles, fabricated type anodised etc complete all as specified and directed by Engineer-in-Charge

All as per item No 41 (here-in-before) but in repairs

Supply and fixing 300 mm long Aluminium alloy anodized sliding door bolt with hasp , staple (bolt type) fixing clips of sheet cast or extruded section & fixing bolts , sliding bolts of extruded section etc complete all as specified and directed by Engineer-in-Charge

All as per item No 43 (here-in-before) but in repair

S & F 200 mm long aluminium anodised, barrel tower bolt of extruded section and fixed etc complete all as specified and directed by Engineer-in-Charge

All as per item No 45 (here-in-before) but in repair

S & F floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140 mm size overall etc complete all as specified and directed by Engineer-in-Charge

All as per item No 47 (here-in-before) but in repair

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 3mm thick ordinary quality plain sheet glass glazing with oil putty in squares not exceeding 0.5 Sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

Dismantling of ceiling boards or insulation boards any thickness including cover fillets etc complete all as specified and directed by Engineer-in-Charge

M&L for Non-Asbestos Fiber Cement Building Board 4.0mm thick, fixed to GI Snap Grid on Ceiling, etc complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete(un-reinforced) in paving exc 15 cm thickness in any position for sunken portion of first floors etc complete all as specified and directed by Engineer-in-Charge

M&L for Rendering 10mm thick in cement and sand mortar (1:3) on other than fair faces of stone masonry and finishing even and smooth without using extra cement including water proofing compound @ 3% by weight of cement or as per manufactures instructions etc complete all as specified and directed by Engineer-in-Charge(Note: WPC will be measured and paid separately under appropriate item of this BOQ)

M&L for APP polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms / Sqm) laid on primed surfaces by forced application etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC (1:5:10) type E-2 ( 40mm graded stone aggregate) in mass concrete for lean concrete of WC / Bath etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC (1:2:4) type B-1 (12.5mm graded stone aggregate) in sub base of WC / Bath sunken portion etc complete all as specified and directed by Engineer-in-Charge

Supply only Integral water proofing compound etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs grating 100 mm dia of PTMT etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge Make:- (Cat part No MOR 1320(Orintal series) of MARC or equivalent to makes in make list in Appendix `C'

Supply and fix in repairs wash hand basin vitreous China white, flat back type of size 550 X 400 mm pedastal type including pedastal, pillar tap, CP waste chain and plug and porcelain stopper, waste pipe, a pair of brackets,or errecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge Make :- Cat Part No 10098 of Hindware or equivalent to makes in make list in Appendix `C'

Supply and fix in repairs PVC connections 15 mm dia, 450 mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as directed.Make:- Cat part No MOR 1010(Orintal series) of MARC or equivalent to makes in make list in Appendix `C'

Supply and fixed 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6kg/cm^2 fixed to waste coupling of WHB/ kitchen sink etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren complete all as specified and directed.Make :- Cat Part No C0117 of Parryware or Cat Part No 20042 of Hindware or equivalent to makes in make list in Appendix `C'

Supply and fix repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories all as directed. Make :- Sleek essence series Of Hindware or Cat part No E8303 of Parryware or equivalent to makes in make list in Appendix `C'

S&F in repair 75 mm bore dia PVC (SWR) floor trap, plain with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using graded stone aggregate etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No MOR 1020 A (Orintal series) of MARC or equivalent to makes in make list in Appendix `C'

Supply and fix in repair 15 mm dia bib tap, chromium plated, fancy type, with capstan head, ISI marked screwed downs screwed for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets all as directed. Make:- Cat part No UO911 of PLUMBER or equivalent to makes in make list in Appendix `C'

Supply and fix in repairs looking mirror of size 600 mm X450 mm all as directed. Make:- Cat part No C 8606 Of Parryware or equivalent to makes in make list in Appendix `C'

Supply and fix in repairs, shower rose with shower arm from Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260(Shower arm) from MARC or equivalent to makes in make list in Appendix `C'

Supply and fixed in repairs 75 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixed in repairs PVC SWR bends 75 mm dia etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting complete all as specified and directed.

Taking up or down steel tubing for 15 mm dia bore etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 15 mm bore galvanised steel tubing medium grade laid in trenches or fixed to walls / ceiling etc complete all as specified and directed by Engineer-in-Charge.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated conforming to Fe-410W (Gde-E-250) quality -A etc complete all as specified and directed by Engineer-in-Charge.

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted bolt or welded attachment conforming to Fe-410W (Gde-E-250) quality -A etc complete all as specified and directed by Engineer-in-Charge.

M&L for reinforced cement concrete (nominal mix) 1:2:4 type B-1 ( 20mm graded stone aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed by Engineer-in-Charge.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engineer-in-Charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed by Engineer-in-Charge.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation etc n.exc 10 sqm on plan and getting out in hard/dense soil etc complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in hard/dense soil etc complete all as specified and directed by Engineer-in-Charge.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point.etc complete all as specified and directed by Engineer-in-Charge.

Formed work to soffits of suspended old slabs such as roof slabs, floor slabs, landings and similar work n.exc 200mm thick ( Horizontal or sloping) etc complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete all as specified and directed by Engineer-in-Charge

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn in and including PVC casing and capping ISI Marked with its accessories with provn of CI/pressed steel terminal switch box 3mm thick and white bakelite plastic laminated top sheet cover and fixed with brass screws cup washer for fixing switches/socket/regulators etc with and including 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth & connecting to earth dolly for the following, etc complete all as specified and directed by Engineer-in-Charge. Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point controlled by one, one way switch, single pole

One fan point controlled by one, one way switch, single pole

One 3 pin 5 Amp socket out let on independent board.

One 3 pin 5 Amp socket out let on same board.

One bell point controlled by one bell push on independent board

One light point controlled by one two way switch single pole

All as per Item No 88 here-in-before but 2.5 Sqmm Copper conductor cable for phase, neutral and earth for one 3 pin, 15 Amps socket out let on independent board

S&F Switch Piano Flush type 230/250 Volt, 5 Amp single pole one way, etc complete all as specified and directed by Engineer-in-Charge

All as per Item No 96 (hre-in-before) but two way switch.

S&F bell push, switch flush type, 5 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F bell, AC, 230 volts single pole etc complete all as specified and directed by Engineer-in-Charge

S&F step type electronic fan Regulator flush type on the existing phenolic laminated sheet cover etc, as reqd single pole 240 volts grade 100 watts heavy duty ISI marked etc complete all as specified and directed by Engineer-in-Charge

S&F switch socket combination multi purpose 2 in 1, 6 pin 5 Amp, flush type etc complete all as specified and directed by Engineer-in-Charge

S&F switch socket combination 5 in 1, 5 Amp / 15 Amp, flush type ISI marked etc complete all as specified and directed by Engineer-in-Charge

S&F ceiling rose surface bakelite 65mm x 50mm three etc complete all as specified and directed by Engineer-in-Charge

S&F lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendant fittings etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement double door Sheet metal enclosures factory made DBs 8 way, (SPN DB's) 240 volts protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 100 A copper Busbar, With Neutral bar, Earthbar and Cable lies for Cable management, Fully shrouded, Neutral bars, Prefitted masking sheet etc complete all as specified and directed by Engineer-in-Charge

S&F in replacement double door Sheet metal enclosures factory made DBs 4 way, (TPN DB's) 415 volts protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 100 A copper Busbar, With Neutral bar, Earthbar and Cable lies for Cable management, Fully shrouded, Neutral bars, Prefitted masking sheet etc complete all as specified and directed by Engineer-in-Charge

S&F Isolators of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) Note :- Make of the isolator shall be the same as that of DB) for thre following etc complete all as specified and directed by Engineer-in-Charge:-

Supply & fixing MCB , SP, AC, 240 volts of 06 to 32 Amps, 10 KA Capacity, 'C' series and making connections with suitable size of copper lugs etc complete all as specified & directed by Engineer-in-Charge

Supply & fixing MCB , SPN, AC, 240 volts of 32 to 63 Amps, 10 KA Capacity, 'C' series and making connections with suitable size of copper lugs etc complete all as specified & directed by Engineer-in-Charge.

Supply & fixing MCB, TPN, AC, 415 volts of 40-63 Amps, 10KA Capacity, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed. Make: Legrand, Cat No. : 4086-81 to 83 or equivalent in Simens /Hager/ L&T

S&F Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core seathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge

S&F Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 10 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core seathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge

M&L Earthing complete with galvanized earth plate electrode 600x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below ground level connected to galvenised earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 5 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC(1:3:6) type C-1 using graded stone aggregate pit with precast RCC Cover slab 40 mm thick in PCC(1:2:4) type B1 reinforced with 8 mm dia TMT bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe etc complete all as specified and directed by Engineer-in-Charge connected to earthing list point etc complete all as specified and directed by Engineer-in-Charge

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through in and including PVC casing and capping with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified & directed by Engineer-in-Charge Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) Note: Two run of 4 sq.mm cable i.e for one run for phase, one run for neutal with one run of 4 sq.mm cable for earth and one run of PVC Casing & caping shall be measured as one unit

S&F in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge. Make -Havell's Cat Part: (ENDURAPEARLSL25W MP) ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent in to makes in make list in Appendix `C'.

Supply and fix in replacement industrial type switch socket for Geyser with 20 Amps MCB etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 86,957.00 shall be deducted from BOQ on account of schedule of credit

M/S-B.R.SONAWANE

OM SAI ASSOCIATES

M/s.Abhay Kulkarni and Associates

R. T. Saluji

M/s Meher Construction