Loading…
Loading…
Tender Value
₹2.0 Cr
EMD Value
₹2.5 L
Closing Date
16 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKSOL
19 conditions · 8 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure- VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender .
b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of dvertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.
In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.
In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of Similar Work: - Any work involving provision of power supply arrangement.
28 conditions · 12 needing a document upload
Please submit your bank details i.e. Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, and PAN Number.
Please furnish list of plant and Machinery available on hand own and proposed to be inducted own and hired to be given separately for the subject work.
Please furnish list of Works on hand indicating Description of Work, Contract Value, Approximate value of balance work yet to be done and Date of award.
Please furnish list of Works completed in last seven financial years giving Description of Work, Organization for whom executed, approximate value of contract at time of award, Date of award and Date of Completion. Date of actual Start, Actual Completion and Final value of Contract shall also be given.
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
Documents to be Submitted Along with Tender: (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii)Following documents shall be submitted by the tenderer:
(a)Sole Proprietorship Firm: All documents in terms of Para 10 of the Tender Form (Second Sheet) above (As per GCC-2022).
(b)HUF: i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.as per GCC-2022.
(c)Partnership Firm: All documents as mentioned in para18 of the Tender Form (Second Sheet) as per GCC-2022.
d) Joint Venture (JV): All documents as mentioned in para 17 of the Tender Form (Second Sheet).as per GCC-2022.
(e)Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.(Eligibility Criteria) above as per GCC-2022.
(f)(i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet)..(Eligibility Criteria) above as per GCC2022.
(g)Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer whether sole proprietor/ a company or a partnership firm/registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected.
Any DIPP certificate submitted along with the tender document for, exemption of EMD should be valid on the date of opening of the tender, else the tender offer will be summarily rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderers may also upload the following documents along with his/their tender: The tenderer may upload statement, which shall contain organizational set up and working systems to be adopted by the successful tenderer s during the operation of the contract. It shall contain the details of man power and machineries in the prescribed format and details of methodology for planning, execution, monitoring and completion of the project. The methodology so adopted shall suit to the nature of work and shall also comply fully with best practice and current regulations. A comprehensive detailing for each activity like setting-up organization, safety plan, execution plan, quality assurance plan, sequence of work to achieve the mile stones, ensure targeted progress and quality and in turn deployment of resources, risk analysis and its mitigation strategy shall be given communication arrangement within his organization and with the railways for decisions, progress or any other matter connected with this project to ensure full information about the project including progress of work at different time scale shall also be furnished.
List of works completed in the last seven financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work. Date of actual start, actual completion and final value of contract should also be given.
Supportive documents/certificates from the organizations with whom they worked/are working as list of works completed and list of works on hand should be enclosed.
List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award.
Uploading of declaration regarding Employment/Partnership etc. of Retired Railway Employees as per GCC-2022 .
Uploading of Tender Forms shall embody the contents of the contract documents either directly or by reference and shall be as per specimen form, e-Tender Forms shall be issued free of cost to all tenderers.
A copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure-V(A) shall also be submitted by the each member of a partnership firm/Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be.Non submission of a copy of certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document. (As per Railway bord letter no.2022/CE-l/CT/GCC- 2022/Policy dt. 13.12.2022)
Declaration form regarding site etc.
Declaration regarding constitution of firm .
Engineers/Personnel .
Performa of Completion Certificate .
Reliability improvement for MSDAC with the segregation of Quad cable and power supply for remaining A/C over Jhansi division.
JHS-N-W-26-26
JHS-N-W-26-26
Open
Works - General
12 Months
Jhansi, Uttar Pradesh
₹0
₹2.5 L
16 Apr 2026
25 Mar 2026
2 Apr 2026
101 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,50,37,217.22 | ||
| — | 500.00 | — | — | ||
| Supply of ARA terminal block, made of PBT, as per RDSO spec. No. IRS: S-75/2006 (Rev.2) or latest and as per Drawing. No. SA- 23741A (Alt.-4) or latest. (Inspection Agency:- RDSO). | — | — | — | 58,505 | |
| — | 350.00 | — | — | ||
| Supply of Cartridge Fuse block, made of PBT, as per RDSO spec. No. IRS: S-75/2006 (Rev.2) or latest and as per Drawing. No. SA- 23748 (Alt.-4) or latest.(Inspection Agency:- RDSO). | — | — | — | 85,242.5 | |
| — | 350.00 | — | — | ||
| Supply of Non deteriorating type, Round head type, low voltage cartridge fuse as per Spec No IRS: S-78/2006 with latest amendments, 10A rating capacity. (Inspection Agency:- RDSO). | — | — | — | 43,099 | |
| — | 1100.00 | — | — | ||
| Supply of 1 x 10 Sqmm (Red/Black/Green) multi strand pvc insulated copper flexible power wire, and test parameters as per RDSO Specn.No.IRS:S-76/89(Amnd.3) or latest. Colour of the wire which is required will be specified by the Engineer incharge.(Inspection Agency:- Consignee). | — | — | — | 1,45,706 | |
| — | 1000.00 | — | — | ||
| Supply of 16/0.2 mm (0.5 sq mm) PVC insulated multi strand, single core, tinned copper conductor, as per RDSO Specn.No.IRS:S-76/89 (Amnd-3) or latest. Each coil should be of 100/200/500 meters length. Colour of the wire will be specified by the Engineer incharge.(Inspection Agency:- Consignee). | — | — | — | 10,750 | |
| — | 1000.00 | — | — | ||
| Supply of Disconnect Terminal block for four conductors with screwing cage /clamp type, sliding switch disconnect, as per RDSO spec.No. RDSO/ SPN/189/2004 Ver. 3.0 or latest, for each conductor size up to 2.5 sq. mm, equivalent of M6 terminals. Each terminal block equipped with two markers, on top and bottom, an end plate, two end clamps and adequate length of rails for fitting terminal blocks.(Inspection Agency:- RDSO). | — | — | — | 1,92,720 | |
| — | 11.00 | — | — | ||
| Supply of working table for SMMS system as per tech specification. (Inspection Agency:- Consignee). | — | — | — | 1,97,296 | |
| — | 1600.00 | — | — | ||
| Supply of Double Walled Corrugated (DWC) Pipe/duct with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & anti-oxidant and non flame propagating type in 6 meters straight length and of size 120 mm outer dia,& 103.5 mm inner dia. (The manufacturers, suppliers must produce valid IS license and should be certified under ISO 9000 and shall submit copy of certificate). One couple with suitable rubber O-ring should be supplied with every 6 mtr of pipe length.(The total quantity of above items is equal to no. of pipes supplied). DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vendor name and year of manufacture can be easily identified.(Inspection Agency:- RITES). | — | — | — | 9,70,992 | |
| — | 132.00 | — | — | ||
| Supply of DC-DC Converter as per Spec No. IRS:S-96/2000 or with latest amendment / specification rating -24 /40V, 60V, 100V DC. 10A suitable for (Make-Statcon/AmaraRaja).(Inspection Agency:- RDSO/RITES). | — | — | — | 31,72,363.92 | |
| — | 4.00 | — | — | ||
| Supply of maintenance Service Terminal for installation, testing and maintenance of all Signalling system parameters and as per Technical Specification.(Inspection Agency:- Consignee). | — | — | — | 2,91,554.76 | |
| — | 9.00 | — | — | ||
| Micro Controller Logic Card No.3 (MLB1) for CEL make SSDAC Systems as per RDSO Specn. No.RDSO/SPN/177/2012 ver.3 or latest.(Inspection Agency:- RDSO/RITES). | — | — | — | 5,51,709 | |
| — | 9.00 | — | — | ||
| Micro Controller Logic Card No.4 (MLB2) for CEL make SSDAC Systems as per RDSO Specn. No.RDSO/SPN/177/2012 ver.3 or latest.(Inspection Agency:- RDSO/RITES). | — | — | — | 5,51,709 | |
| — | 10.00 | — | — | ||
| Supply of Tx coil (Web Mounting Type) 15mtr for CEL make SSDAC Systems as per RDSO Specn. No. RDSO/SPN/177/2012 ver.3 or latest. (Inspection Agency:- RDSO). | — | — | — | 1,00,687.2 | |
| — | 10.00 | — | — | ||
| Supply of Rx coil (Web Mounting Type) 15 mtr for CEL make SSDAC Systems as per RDSO Specn. No.RDSO/SPN/177/2012 ver.3 or latest. (Inspection Agency:- RDSO). | — | — | — | 1,00,687.2 | |
| — | 10.00 | — | — | ||
| Suppy RDSO/RITES). | — | — | — | 6,75,242.7 | |
| — | — | — | (Inspection | ||
| — | 10.00 | — | — | ||
| Supply RDSO/RITES). | — | — | — | 6,75,242.7 | |
| — | 10.00 | — | — | ||
| Supply of PD1 21 KHz card for G.G.Tronics make HASSDAC.(Inspection Agency:- RDSO). | — | — | — | 4,56,876.3 | |
| — | 10.00 | — | — | ||
| Supply of PD2 21 KHz card for G.G.Tronics make HASSDAC. (Inspection Agency:- RDSO). | — | — | — | 4,56,876.3 | |
| — | 10.00 | — | — | ||
| Supply Rx Track Device of G.G.Tronics Make SSDAC/HASSDAC as per RDSO Specn. No.RDSO/SPN/177/2012 (Version 3) having length of cable 15 Mtr. (Inspection Agency:- RDSO). | — | — | — | 3,03,357.2 | |
| — | 10.00 | — | — | ||
| Supply Tx Track Device of G.G.Tronics Make SSDAC/HASSDAC as per RDSO Specn. No.RDSO/SPN/177/2012 (Version 3) having length of cable 15 Mtr. (Inspection Agency:- RDSO). | — | — | — | 3,03,357.2 | |
| — | 10.00 | — | — | ||
| Supply of Dual Micro Controller Logic Card for CEL make Field Unit of Multi Section Digital Axle Counter Systems as per RDSO Specn. No. RDSO/SPN/176/2013 or latest.(Inspection Agency:- RDSO/RITES). | — | — | — | 11,03,418 | |
| — | 10.00 | — | — | ||
| Supply of SCC1 for Field Unit of CEL make Multi Section Digital Axle Counter Systems as per RDSO Specn. No. RDSO/SPN/176/2013 or latest. (Inspection Agency:- RDSO). | — | — | — | 4,47,497.3 | |
| — | 10.00 | — | — | ||
| Supply of SCC2 for Field Unit of CEL make Multi Section Digital Axle Counter Systems as per RDSO Specn. No. RDSO/SPN/176/2013 or latest. (Inspection Agency:- RDSO). | — | — | — | 4,47,497.3 | |
| — | 10.00 | — | — | ||
| Supply of Modem Card for Field Unit of CEL make Multi Section Digital Axle Counter Systems as per RDSO Specn. No. RDSO/SPN/176/2013 or latest. (Inspection Agency:- RDSO). | — | — | — | 4,47,497.3 | |
| — | 10.00 | — | — | ||
| Supply of DC-DC Converter card for CEL make Field Unit of Multi Section Digital Axle Counter Systems as per RDSO Specn. No. RDSO/SPN/176/2013 or latest. (Inspection Agency:- RDSO). | — | — | — | 2,69,724.4 | |
| — | 6.00 | — | — | ||
| — | — | — | 55,043.94 | ||
| — | 2.00 | — | — | ||
| Supply, installation and commissioning of Single Section Digital axle Counter Phase Reversal type as per RDSO Specification No. RDSO/SPN/177/2012 (Version -3) and latest if any. Each Set consists of following:- a) High frequency TX Coil and RX Coil with Cables (Each Set consists of CLAMP type TX Coil 2 Nos., RX Coil 2 Nos. along with 10 mtrs.Cable) = 2 Sets. One Set will be submitted with SSDAC during installation and one Set will be kept as Spare with the Consignee. b) Track Side Digital Axle Counter unit 2 Nos. c) VR Box 2 Nos. Each duly wired with 2 nos. of 24V, 6F/6B, 1000 ohm Q type relays. d) Clamp with deflector plates and hardware etc. 4 nos. e) Reset Box 2 nos. f) All other Equipment/Subsystem/literature as available in Standard Set as per RDSO Specification.(ii) Mushroom/Location Box suitable for housing Track side equipment = 2 nos Make: CEL of M/s Central Electronics Ltd., Shahibabad. (Inspection Agency:- RDSO). | — | — | — | 13,90,040 | |
| — | — | — | 52,39,857.14 | ||
| — | 80.00 | — | — | ||
| Cross trench for identification of the route of existing signaling and telecom cables. | — | — | — | 23,223.2 | |
| — | 200.00 | — | — | ||
| Cutting of all types of platforms/road crossing and trenching and excavation to a width and depth of 300 mm x 300 mm, laying of DWC/HDPE/GI pipe in the trench and refilling and concreting it afterwards as per original condition. In hard rocky ground area, cables will be laid normally on layer of soft earth of 0.05 meter thickness previously deposited at bottom of the trench. The cutting to be filled and finished with cement/concrete, as per the RDSO drawing No. SDO/ Cable laying/008, issued vide RDSO document No. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014 or latest. | — | — | — | 31,762 | |
| — | 18000.00 | — | — | ||
| Excavation of cable trench as per cable route plan, 1.2 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr. wide at bottom as per RDSO sketch No. SDO/CABLE LAYING/003, issued vide RDSO document no. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014 or latest, alongside the track in normal soil/strata (including soft rock), conforming to distances as per cable route plan and refilling and ramming of loose soil. This work includes clearing of route from bushes etc, covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately. The work shall be done as per the extant practice on North Central Railway and instructions of Railway Engineer at site. In case 1.2 m depth of trench is not achievable due to site conditions, specific approval of JAG/SG Officer will be required for each site wherel trench depth of 1.2m is not possible, only after approval of JAG/SG Officer proportionate payment can be done. | — | — | — | 11,64,420 | |
| — | 3500.00 | — | — | ||
| Excavation of cable trench as per cable route plan, 1.2 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr. wide at bottom as per RDSO sketch No. SDO/CABLE LAYING/003, issued vide RDSO document no. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014 or latest, alongside the track in Rocky soil, conforming to distances as per cable route plan and refilling and ramming of loose soil. This work includes clearing of route from bushes etc, covering] of cable laid in trench by loose soil for a layer of 50mm thickness approximately. The work shall be done as per the extant practice on North Central Railway and instructions of Railway Engineer at site. In case 1.2 m) depth of trench is not achievable due to site conditions, specific approval of JAG/SG Officer will be required for each site where trench depth of 1.2m is not possible, only after approval of JAG/SG Officer proportionate payment can be done. | — | — | — | 3,12,130 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ADVANCECORRECTIONSLIP7.pdf
ATTACHMENT
ADVANCECORRECTIONSLIP8.pdf
ATTACHMENT
ADVANCECORRECTIONSLIP9.pdf
ATTACHMENT
ADVANCECORRECTIONSLIP10.pdf
ATTACHMENT
GCC-2022change.pdf
ATTACHMENT
GCC 2022 Correction slip 4
ATTACHMENT
AdvanceCorrectionSlipNo_6.pdf
ATTACHMENT
DIPPtendercondition30.05.2025.pdf Validity of DIPP in Tender document
ATTACHMENT
GCCcorrectionslip-5.pdf
ATTACHMENT
Annexure-VandAnnexure-V_A_.pdf Annexure V and Annexure VA
ATTACHMENT
2021Tele523part13425647.pdf
ATTACHMENT
AdvanceCorrectionSlipNo.2.pdf
ATTACHMENT
GCC-2022.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
Tender booklet
ATTACHMENT
GCC 2022 Correction slip 3
ATTACHMENT
GCC2022ACS-3AdvanceCorrectionSlipNo.3.pdf
ATTACHMENT
2022-CE-I-CT-GCC-2022-PolicyCorrectionSlipNo.4.pdf
ATTACHMENT
Annexure-VandAnnexure-V_A_.pdf
ATTACHMENT
DIPPtendercondition30.05.2025.pdf
ATTACHMENT
TENDERbooklet-Reli.impMSDACQcableJHSdivi..pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .