REPAIRS TO STEEL, WOODEN JOINERY, ALUMINIUM DOORS/ WINDOW AND PARTITION, FALSE CEILING AND ROOF TREATMENT AT DGQA AREA UNDER AGE B/R (S) NO. II OF GE (SOUTH) SECUNDERABAD

Amount

Demolition of cement concrete in roof incl existing roof teratement (other than ground floor) and removing debris to a distance of n.exc 100M away from the bldg. all as specified and as directed.

M & L for 40 mm thick PCC (1:2:4) ype B1 by using 20 mm graded stone aggregate as in roof, where required over slabs including necessary form work and finishing the exposed surfaces fair and even complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:3 mixed with integral water proofing compound as per manufacture's instructions as in roof and chajjas, finished the surface fair and even.(Note : Supply of water proofing compound will be measured and paid separately .)

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horicontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

M & L for priming plastered roof surfaces with bituminous primer @ 0.3 kg/sqm as per IS-3384 and over the primer apply hot bitumen VG - n30 @ 1.20 Kg/ sqm and providing APP Membarane water proofing treatment by applying mineral finish 3.5 kgs/Sqm Actatic Polyprofhylene (advanced aPP torch on membrane mineral finish)having polyster film reinforcement stablised with fibre glass and finished on top with grey mineral slaltes troch on system of thickness 3.00 mm by torch bonding complete all as directed and as specified.

Supply only integral water proofing compound.

Disconnecting existing tanks setting aside (or laying if required) for carry out the roof repairs cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing in position of the tank capacity exc 250 Ltrs & n.exc 500 ltrs complete all as specified and as directed.

Disconnecting existing tanks setting aside (or laying if required) for carry out the roof repairs cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing in position of the tank capacity exc 500 Ltrs & n.exc 1000 ltrs complete all as specified and as directed.

Taking up or down steel tubing and connections of 20mm dia complete all as specified

S&F 20mm steel water tubing medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and as directed.

M & L providing cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in water tank base/ roof curves or muds, stops, rounded or chamfered on edges complete all as specified and as directed.

Taking down rain water pipes of any description and any size any pattern incl all fittings heads, shoes bends etc all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length fixed to walls/laid in floors/trenches all as specified and directed

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints incl incl all fittings heads, shoes bends etc all as specified and as directed by Engr in Charge.

S&F straps, supports or stays for rainwater, ventilating pipes, including bolts, if required with MS Flat Iron brackets for fixing PVC (SWR) pipes of 110mm dia single socketed in any length with @ 2.0 mtr interwell fixed to walls complete all as specified and directed..

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 lit n exc 500 lit and from mouths of circulating pipes, etccomplete all as specified and as directed

Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 500 lit n exc 1000 lit and from mouths of circulating pipes, etccomplete all as specified and as directed

Dismantling of asbestos cement/galvanium sheet (corrugated or semi corrugated) sheets in roof covering.

Dismantling wrought iron or mild steel work of any description not otherwise provided for as directed and specified by Engr-in-Charge

M&L pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F prepainted galvalume aluminium zink coating GI based plain steel sheeting 0.5mm thick of any colour having tensile stength of 550 Mpa asin roof Ridges to wall fixed with self tapping screws as specified and as directed..

S&F MS rolled section angle/square conduit/flat iron of any size as in purlins, Column, rafter, windtie connected to common rafters fixed with angle cleats with necessary bolts & nuts and other connecting materials required to connect complete all as directed.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L Preparing old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolation of Brick or stone masonry built in cement mortar. all as specified and directed.

M/L brick work with Fly Ash bricks built in CM 1:6 straight or curved exceeding 6m mean radius all as specified.

Taking down cement plaster on brick or stone masonry wall/celing etc incl racking out joints haking for key, scrubbing down with water etc all as specified and directed.

M&L for rendering 15mm thick plaster in two layers (10mm dubbing coat and 5mm thick finishing coat with chicken wiremesh )in CM 1:4 on fair faces of brick/concrete finished even and smooth without using extra cement incl taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc NOTE :- (Chicken wiremesh will be measured and piad seperately)

S & F Chicken Wiremesh Size and dia of the wire as specified by Engr-In-Charge.

M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:3 on ceiling,chajja,roof projection etc finished even and smooth without using extra cement.complete all as specified and as directed.

M/L rendering 15mm thick in two layer ( 10 + 5 mm) CM 1:4 on fair faces of brick or concrete surface II nd layer 5 mm thick with 3% of Water Proofing Compound and finishing the surfaces even and smooth without using extra cement in patch work at various places upto height 7.50m incl necessary formwork complete all as specified & directed. (Note : WPC Shall be measured and paid seperately)

M & L for 10 mm thick rendering in Cement Mortar 1:4 on soffit of slab/sun shade of Concrete surfaces finished even and smooth without using extra cement. complete all as specified and as directed.

M&L for applying two coats of Dr Fixit Rain coat over acoat of prime seal primer incl preparation of newly plastered surface of wall complete all as specified and directed..

M&L for applying three coats of white wash incl preparation of newly plastered surface of ceiling complete all as specified and directed..

M&L for applying three coats of white wash incl preparation of newly plastered surface of walls complete all as specified and directed..

M&L for preparation of new plastered surfaces of wall applying two coats of OBD over one coat of primer incl 3 mm thick birla white putty, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall applying two coats of cement base paint over one coat of primer complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets.

M&L for providing false ceiling with anodised aluminium snap grid frame work for false ceiling Incl hangers complete all as sepcified and directed by Engr-In-Charge.

S&F 4mm thick of Non asbestos fibre cement building Designer E boards fixed to Aluminium framework in ceiling with screws complete all as specified and directed by Engr-In-Charge.

S&F 12.5 mm thick gypsum board seamless false ceiling fixed with standard GI section such as channels, angles the grid suspended with GI suspender and cleat from soffit of slab with expension fasteners. Gypsum board shall be fixed with screwe to the ceiling section/grid. The board shall be 12.5mm thick and the soffit of board shall be finished with gypsum plaster and levelled to give flush look as per manufactcurer's instructions incl necessary cutting for light fitting and AC and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. .

Taking down shutters of any description exc. 1.00 Sq.m and n.exc. 2.00 Sq.m each.

Taking down Chowkats with shutters (Without taking off shutters from frame) area exc 1.5 Sqm but not exc 4.00 Sqm

Taking down Chowkats with shutters (Without taking off shutters from frame) n exc 1.5sqm each complete

S&F of 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2, raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, with paticle board core supplying & fixing in frame at site as per specification & drawing

S&F 35mm thick plain factory made framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply The size of rail and stile as per IS 1003 (Part-I Kiln seasoned and chemically pressure treated complete all as specified.

S & F, 35mm thick, 2nd class hardwood glazed & skelton shutters, open rebated & prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a).

S&F 35 mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L in repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination fixed with timber frame work of cupborads book cases etc completle all as specified and as directed.

S&F 100mm long stain less steel Butt hinges, fixed complete all as specified and as directed.

S&F 100mm long MS Medium weight Butt hinges cold rolled , fixed complete all as specified and as directed.

S&F 75mm long MS Medium weight Butt hinges cold rolled , fixed complete all as specified and as directed.

S & F 30mm width flaps of Continuous (piano) hinges,mild steel, bright finish or electro galvanised in repairs all as specified and as directed.

S&F 100mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and as directed..

S & F 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete all as specified and as directed.

S & F 150mm long floor door stopper of aluminium alloy boly and tongue anodised with hard steel spring fixed in floor complete all as specified and as directed.

S&F in repair 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane. Incl hacking out old broken glass complete all as specified and as directed.

Taking down steel/aluminium /windows, /doors, of any size with/without frame and shutters and including with all connected accessories complete.

S & F Powder coated Aluminium anodized frame work for door / windows / ventilators with one or more rebates including joining heat for fixing etc complete all as specified

S & F Powder coated anodized door shutters, aliminium section weighting 0.55 Kg/M including necessary joinging cleats, galzing clips, ruber neoprene pakcing handles 2 Nos in each door, hinges anodised aliminium snap beading screws etc, complete all as specified

S&F Powder coated anodied aluminium window and ventilator shutter ,side hung type without sash bars aluminium sections weighing 0.55 kg/m including necessary joining cleats ,glazing clips rubber packing anodised aluminium snap beading ,screws,anodised aluminium fitting such as peg stays 150 mm long (1 no),hinges typeB-21 100mm long (2 nos) suitable handle (1no) complete all as specified.

S&F Alu door closure hydraulically regulated disignatin No 3 universal type suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed.

S&F in repair door closure hydraulically regulated disignatin No 3 universal type suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed.

S & F prelaminated particle board 9mm thick interior grade pre laminated one side with decorative choice lamination and other side balancing white lamination fixed with screws.

S & F brass Mortice lock 4 leavers vertical type size 100mm complete all as specified and as directed..

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples.complete all as specified and as directed.

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with galvanised wire staples fixed in repairs.complete all as specified and as directed.

S & F, steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window.

S&F, steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete without glazing bars, dovetailed or welded including taking down the old window.

S&F MS Framed work such as Gates,grills or gratting etc with ends of bars welded of any size and any design all as directed of Fe 290 Grade E-165.complete all as specified and as directed.

M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer.complete all as specified and as directed.

M &L Welding in repairs to the thickness exc 6mm but n. exc 9mm steel section, welded length n. exc 2.5 cm in each length etc all as directed by Engineer-in- charge.

S & F aluminium daco Grills (DG 104) with F section Channel complete of 4mm thick for windows of aperture 50 mm complete all as spd and directed.

S.R.M.K Enterprises

LAKSHMI ENGINEERS

PARDEEP AND CO

VACON INFRASTRUCTURES

NEWS CONSTRUCTIONS

BEEGEE DESIGN SYSTEMS

G.MADAN MOHAN