Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹68.7 LAccepted-Finance GE W COLABA MUMBAI | CHANDRAPUR | MAHARASHTRA | 441205 | L1 | Accepted-Finance Lowest one | |
| 2 | L2₹86.8 L+₹18.2 L (26.4%)Rejected-Finance A 14 USHA SADAN NEAR POST OFFICE COLABA MUMBAI 05 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹99.5 L+₹30.8 L (44.8%)Rejected-Finance NOT AVAILABLE | L3 | Rejected-Finance Other than lowest | |
| 4 | Rejected-Technical ROOM NO 997 GALI NO 3 PART NO 3 GANESH MURTHY NAGAR CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | - | Rejected-Technical Due to not enlisted in appropriate class |
Tender Value
Refer Docs
EMD Value
₹1.9 L
Closing Date
3 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW NOFRA
Dr Homi Bhabha Road New Navy Nagar Colaba Mumbai
WELCOME MAINTENANCE DAY TO DAY MAINT WORKS IN SASSOON COMPLEX AND EXTERNAL PERIODICAL SERVICES OF OTM ACCN AND PERIODICAL CLEANING OF UNDERGROUND SEWAGE LINES FOR OUTLAYING AREA UNDER AGE BRII OF GE (NW) NOFRA COLABA MUMBAI
2023_MES_594021_1
8168
Open Tender
Civil Works
Item Rate
300 days
Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹1,000
GE NW NOFRA
₹1.9 L
Yes
13 Jun 2023
9 May 2023
5 Jun 2023
9 May 2023
3 Jun 2023
20 May 2023
9 May 2023 - 15 May 2023
Amount
Note : (i) The tenderer shall note that before quoting his unit rate, all items of works shall be executed in high rise building ( 16th floor building) & necessary scaffolding & safety measurement.
M&L for Washing, rubbing down and stopping of distempered and painted surfaces of wall and apply two coat distemper oil emulsion over a coat of primer on 1 to 2 mm thick wall care putty (JK /Birla ), complete all as specified.
M&L for preparation of old wall surfaces and applying two coats of oil emulsion distemper complete all as specified and directed.
M&L preparation of old distempered surfaces of walls and applying one coat of oil emulsion distemper on walls etc all as specified.
M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil emulsion distemper on ceiling .
M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as speciified.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
Taking down chowkats or frames n exc 1.5 sqm each with shutters (without taking off shutters from the frame)
Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)
Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each
S&F 2nd class hard wood (sal) plain, solid, straight chawkats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.
S&F 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side, complete all as specified.
S&F 35mm thick 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated
S&F 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc all as specified and directed.
M&L for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surface.
S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specification and drawings.
S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified
S&F powder coated (colour of coating as directed) aluminium (minimum 25 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type)etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etc all as specified and as directed.
S&F aluminium grill with and including suitable aluminium anodised frame F/H section as required manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick all as specified and as directed by Engr- in- charge.
S&F in repairs 18/19 mm thick prelaminated partical boad interior grade prelaminated both side with decorative choice lamination & fixed with screws to timber frame work including 6 mm thick teak wood beading all around complete all as specified and directed.
S&F in repairs 12 mm thick prilaminated partical boad interior grade prelaminated both side with decorative choice lamination & fixed with screws to timber frame work including 6 mm thick teak wood beading all around complete all as specified and directed.
S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section all as specified and directed
S&F 150 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.
S&F butt hinges 100 mm stainless steel hinges medium weight and fixed.
M & L for MS flat for hold fast. Conforming to Fe-310-0 or Fe-410-0
S&F 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified
S&F 125 mm long hasp and staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws
Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified. ( Work carried out upto 16th floor of building either from inside or from outside)
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane all as directed. ( Work carried out upto 16th floor of building either from inside or from outside)
S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete.( Work carried out upto 16th floor of building either from inside or from outside)
S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.
Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and refixing in the same opening after easing & adjusting all as specified and directed.
Resecuring or easing & adjusting without taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each all as specified and directed.
S&F as in repairs 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified and directed.
S&F as in repairs aluminium anodized barrel tower bolts 200 mm of extruded section all as specified and directed.
S&F as in repairs aluminium anodized barrel tower bolts 150 mm of extruded section all as specified and directed..
S&F as in repairs 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified and directed.
S&F as in repairs 150 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified and directed.
S&F in repairs for 7 levers Godrej Night Latch all as specified and directed
S&F in repairs gate and shutter hooks and eyes 150 mm size of aluminium plate type II all as specified and directed.
S&F in repairs fancy type drapery rods, powder coated aluminium of 20-25mm size with / including brackets, Knobs rollers etc.all as specified and directed.
S&F in repairs 20 mm dia harrison rails anodised aluminium alloy incl brackets, stops and rollers etc all as specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor including 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. all as specified and directed.
M&L for coloured glazed ceramic tiles 450x300x7 / 350x250 x7 mm mm thick but as on vertical surfaces such as skirting/dado including 10 to 15 mm thick backing coat in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.
M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, incl 10 to 15mm thick backing coat in CM 1:4 , complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified.
M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding all as directed.
M&L for machine cut cudappa stone slab 20-25 mm thick laid over 20 mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed.
Grinding and polishing existing floor of any type (kota stone/mossaic/cuddpah stone floor) complete all as specified and directed.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water & ht. upto 16th floor of bldg., complete all as specified and directed.
Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces, surfaces to be finished even and smooth without using extra cement & ht. upto 16th floor of bldg., complete all as specified. (Plaster work carried out in patch work)
M&L plastering 10mm thick in CM 1:4 in ceiling finishing even and smooth without using extra cement. (Plaster work carried out in patch work)
M&L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound @2% by weight of cement, complete all as specified. (Water proofing compound to be measured and paid for separately).
Supply only integral water proofing compound complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer on of 1 to 2 mm thick wall care putty (JK/Birla) all as specified and directed.
Material & labour for newly plastered surfaces of wall and applying two coats of Acrylic Smooth exterior paint of required shade over a coat of exterior primer all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.
S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers , clips & ht. upto 16th floor of bldg.,including taking down existing GI water tubing complete with all fittings of 15 mm bore, complete all as specified. ( Rates includind of scaffolding upto 16th floor)
All as per Ser item No. 64 above but 20mm bore of pipe all as specified and directed.
Taking down & Refixing 15mm bore old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.), complete all as specified. ( Rates incl of scaffolding upto 16th floor)
All as per Ser item No. 66 above but 20mm bore of pipe all as specified and directed.
S&F 20mm bore of CPVC pipes having thermal stability for hot & cold water supply including all plain and brass threded fittings fixed of required sizes including with all fittings and fixed to wall /ceilings with suitable clamps, laid in floor or concealed of 20mm size (in high rise building (upto 16th floor)including scaffolding) and incl. taking down old tubes of any desc. complete all as specified and directed by Engineer-in-Charge. Make: Finolex / Prince/ Astral
Taking down eaves gutters and rainwater pipes of any dia (any size or pattern ) including all fittings, heads, shoes, bends, swan necks etc (Measured overall as fixed along the centre line over fittings and accessories) & ht. upto 16th floor of bldg., complete all as specified and directed.
S&F 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc & ht. upto 16th floor of bldg., complete all as specified and directed.
S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including fixing clips, bends, elbows, shoes etc & ht. upto 16th floor of bldg., complete all as specified and directed.
S&F as in repairs 160mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding etc complete all as specified and as directed by Engineer-in-Charge. Make - Prince, Finolex, Supreme
S&F in repair PVC (SWR) bends of 75 mm bore , complete all as specified and directed.
M&L for repairing and cleaning of PRV including replacement of nut, bolt,washer , rubber gasket adjustable bolt etc and refixing the same PRV in same position of 25 or 32 mm dia size.all as specified and directed. ( Rates incl of scaffolding upto 16th floor)
Dismantling of cast iron or reinforced concrete pipes upto 100 mm (internal dia of pipe) jointed in cement mortar and taking out of trenches if required & & ht. upto 16th floor of bldg., complete all as specified.
S&F sand cast type 100 mm bore cast iron soil , waste and vent pipes in any length with or without ears, with cement joints but fixed to walls with MS clams & ht. upto 16th floor of bldg., complete all as specified..
S&F sand cast type 75 mm bore cast iron soil , waste and vent pipes in any length with or without ears, with cement joints but fixed to walls with MS clams & ht. upto 16th floor of bldg., complete all as specified and directed.
S&F in repairs 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) & ht. upto 16th floor of bldg., complete all as specified and directed.
S&F in repairs 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) & ht. upto 16th floor of bldg., complete all as specified and directed.
S&F in repairs 75mm bore cast iron pipe Branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors, & ht. upto 16th floor of bldg., complete all as specified and directed.
S&F in repairs 100mm bore cast iron pipe Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors, & ht. upto 16th floor of bldg., complete all as specified and directed.
S&F in repairs 100mm bore cast iron pipe Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors, & ht. upto 16th floor of bldg., complete all as specified and directed.
S&F in repairs 75mm bore cast iron pipe Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors, & ht. upto 16th floor of bldg., complete all as specified and directed.
S&F in repairs 75mm bore cast iron pipe Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access doors, & ht. upto 16th floor of bldg., complete all as specified and directed.
S&F as in repairs cast iron 'P' trap 100mm dia all as specified and directed.
S&F in repairs cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 all as specified and directed.
S&F in repairs 100 mm cast iron sanitary connections short connections pipe of length upto 300 mm length all as specified and directed.
Taking down cast iron pipe of 100 mm dia fixed on walls and re-fixed on walls including all fittings after cleaning properly and paint with bituminious paint complete all as specified and directed.
Taking down cast iron pipe of 75 mm dia fixed on walls and re-fixed on walls including all fittings after cleaning properly and paint with bituminious paint complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan white (P or S trap type) including plastic sheet cover with nuts and bolts etc all as specified and directed. (Make -Cera/Jaquar/ Hindware / Parryware)
S&F in repairs water closet squatting pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe).
S&F in repairs vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and pillar tap 15mm bore dia fancy type complete as fixed in repair.
S&F in repairs 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified.
S&F in repairs PVC bathroom cabinet with 4mm thick looking mirror of overall size 450mm x 300mm of approved tint and pattern and drilling in and fixing with 02 Nos. chromium plated screws complete all as specified and as directed
S&F in repairs plate rack made of stainless steel, 600 x 750X0.55mm including fixing as per manufacturers instruction.
S&F in repairs CP bib cock 15 mm bore complete all as specified and directed. Make : ESSCO /Jaquar / Marc
S&F in repairs fancy type CP Pillar taps 15 mm bore all as specified and directed . Make : ESSCO /Jaquar / Marc
S&F in repairs CP angular stop cock / angle valve 15 mm bore all as specified and directed. Make : ESSCO /Jaquar / Marc
S&F Toilet paper holder with flat recessed type stainless steel and fixed with suitable screws on wall/tiles, Complete all as specified and directed.
S&F in repairs health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook (Make - Cera/Jaquar).
S&F in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.all as directed.
S&F as in repairs flush pipe of PVC 32 mm dia for low level cistern.
S&F in repairs SS grating 100 mm dia all as spoecified
S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm
S&F in repairs 32/38 mm dia WHB/urinal /Sink flexible waste pipe 1m long all as specified and directed.
S&F in repairs aluminium anodised tubular towel rail 20mm dia D type 60 cm long between flanges
Cleaning of loft tank of upto 300 ltrs capacity (in existing position or disconnecting existing tanks for cleaing and refix in same position incl fixing of all attached fittings) by removing out the residual water from the tank, removing dirt, cleaning the internal surfaces of the tank with high pressure controlled water jet pump by using different nozzles as per requirement. After sucking out entire moss and algae by wet vaccume pump, wash the tank with clean drinking water tank cleaning solution on all internal surfaces, then cleaning the bottom surface of the tank with vaccume pump to make it dry and providing sticker showing the date of cleaning ,complete all as specified and directed.
Dismantling water tank of capacity exc. 250 Ltrs but n.exc. 500 ltrs.
S&F rotational moulded polythylene water storage loft tank tank of 300 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.
S&F in repairs PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile all as specified.
S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) all as specified and directed.
Repairing of minor complaints of joinery such as wooden/steel/aluminium of any description including pelmet box, cupboard ,drawers, and the like door springs, rolling shutters etc requiring carpentry work like adjusting easing, wrought, cutting, pinning, wedging and finally making good etc and functioning to seating over with each other with tightening of screws/nails , door, springs etc and fixing of tower bolt, sliding door bolt, plate rack, handles of any size incl rawl plug & screws,and including petty repairs material like screws/nails, plug, grease etc to make it functional as in day to day maintenance work, complete all as specified.
Repairing of minor complaints of plumbing and sanitary fittings including water leakage from taps, EWC”s, flushing cistern, urinals, wash basins, bottle traps etc and any obstruction to water supply in rooms/Qtrs, requiring plumber work with minor stores such as replacement of Brass spindle, M seal, Screws ,nailing , washers, check nuts, tightening of fittings of flushing cistern, cleaning of bottle traps etc to make it functional and stop leaking of any type of plumbing and sanitary items as in day to day maintenance work and fixing of new sanitary fittings (as bib taps, pillar taps, stop cockes, Seat cover, jet spray, cistern, mirror cabinet etc), complete all as specified.
Attending the complaints of air lock of GI pipes during supply hours (In early morning @ 6.00AM) & by taking down GI pipes and /or by using pressure pump in pipe where air lock occurred & resolve the complaint . After refix the GI pipe in the same location, complete all as specified. ( for internal or external airlock in any diameter of pipe) .
M&L for taking down MS grills n.exc 1.5sqm in each grill and refixing in same location , complete all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for.
Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; tank supports, framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .
M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.
M& L for taking down existing aluminium sliding window from aluminium frame carefully & refixing in the same position after replacing bearing wheels fixed at bottom of shutter (02 Nos. in each shutter 1st quality) including all fittings , screws, etc. , and fixing new aluminium section if required complete all as directed. ( New aluminium section shall be paid in respective item)
M&L for anti termite treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the with cement and matching the surface with paint
S&F in repair aluminium grill with and including suitable aluminium anodised frame F/H section as required manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick all as specified and as directed by Engr- in- charge.
Supply and fixing in repair decorative glass corner shelf round 8mm thick, 300mm size with stainless steel railing, fixed with D type stainless steel bracket on wall of approved design and pattern complete all as specified and directed
S & F in repairs of stainless steel slim Ergo single square rail 550 mm anthracite finish with heavy duty and grade steel with finish of zinc, soft close operated ,corrosion resistance telescopic drawer channel having weighing capacity 25 kg complete all as directed.(Make Godrej , Hettich )
M&L for complete removal of old decorated surfaces of walls by scrapping old paint with steel wire brush, wash the surface throughly and applying two coats of acrylic emulsion exterior grade (100%) (1st coat shall be applied by brush/roller, 2nd coat shall be applied by using spray machine over a coat of primer complete including necessary steel scaffolding + green cloth all round the work side for any posititon/height, complete all as specified and directed.(For bldg upto GF to max of 7th Floor + upto height of mummty top ). Note :-Necessary safety precautions need to taken before applying paint. MAKE - a) Primer - Berger Seal-O-prime ,Asian Paints SmartCare Primero , Pidilite Primeseal. b) Acrylic Paint - Berger weather coat all gaurd , Asian ultima , Nerolac Excel total.
M&L for preparation of old decorated surfaces of walls by scrapping old paint with steel wire brush, wash the surface throughly and applying one coat of acrylic emulsion exterior grade (100%) by using spray machine complete including necessary steel scaffolding + green cloth all around the work side for any posititon/height, complete all as specified and directed.(For bldg upto GF to max of 7th Floor + upto height of mummty top ). Note :-Necessary safety precautions need to taken before applying paint. MAKE - a) Primer - Berger Seal-O-prime ,Asian Paints SmartCare Primero , Pidilite Primeseal. b) Acrylic Paint - Berger weather coat all gaurd , Asian ultima , Nerolac Excel total.
M&L preparation of surfaces cracks of plaster internal/external of walls, ceilings/ chajjas upto 5mm wide, remove, loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat complete all as directed and specified by Engineer-in-Charge. (For bldg upto GF to max of 7th Floor + upto height of mummty top ). Make : Dr Fixit, Berger, Asian
Chipping , removing carefullly concrete work by low impact hammer, breakar without damaging the structure & cleaning and disposal of debris out side the premises etc. complete as directed by Engineer-in-Charge. Hard concrete should not be removed by force. (work carried out upto 15th floor) (rates are inclusive of necessary scaffolding)
Material & labour for cleaning existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. and wash the rebars with clean water and wipe it dry complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Piddilite or Dr. Fixit Rust removal or ShaliRust of STP Ltd. on the rebars, and then apply IPNET-RB in two coats keeping an interval of minimum 6 hrs between two coats and allowed to cure in air for minimum 24 hrs before application of repair material, all as per manufacture's instructions and direction.
Replacement of steel reinforcement with TMT bars of appropriate size where 30% of cross section is reduced including dismantling of rusted steel complete all as specified and directed.(work carried out upto 7th floor) (rates are inclusive of necessary scaffolding)
Material & labour for carry out application of Bi-polar migratory corrosion inhibitor EPCO-KP-100/ Protectsil CIT/Ferogard 903 on concrete surface (this inhibitor shall have migratory kind of properly which permits the material to migrate to a virtual extent of 100 mm, through pores of concrete, inhibitor the corrosion and de-passivating the Electro-chemical reaction. It should have properly to attack as well as cathode, which is purely alkaline in nature (pH-9.5), So it has no carcinogen activity with concrete all as per manufacturer's instructions and directed. (work carried out upto 7th floor) (rates are inclusive of necessary scaffolding)
Material & labour for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes. Works shall be carried out as under :- (i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun.Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for minimum 12 hrs. (iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty & let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the crack with a liberal application of the epoxy putty. Make Dr Fixit, STP, Choksy Chemical as approved
Material & labour for Injecting of site cement slurry grout, in the ratio 1:2 (1-cement 2-water) including super plasticizer (supercom-100) 250 ml/50 Kgs. Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 0.5 Kg/cm2 till the grout mix flow out from the nozzle indicating complete filling of grout in the holes drilled. (work carried out upto 7th floor) (rates are inclusive of necessary scaffolding)
Material & labour for Injecting low viscosity MONOPOL (3-5 cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, including, mixing of material mixing of material components(part a & b) in the required quantities as per manufacture`s instruction by weigh batching, Grouting maintain the pressure at exit(0.5 to 1.0 kg/cm2) by monitoring pressure gauge at exit grout the material through prefixed nozzles in the structural elements@100ml per nozzle Repeat the process for all the nozzles. (Beam, RCC wall and columns) (work carried out upto 7th floor) (rates are inclusive of necessary scaffolding)
Providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster confirming to ASTM-C-882-91 (Arizona slant shear test) to ensure bond between old concrete and new concrete complete all as per manufacturer's instructions and as directed by Engineer-in-Charge (work carried out upto 7th floor) (rates are inclusive of necessary scaffolding) Make :- Krishna Conchem, Dr Fixit, Fosroc as approved
Building up the profile of structural member by using latex additives (MONOBOND) modified air cured motor system (Polymer modified motor/LW+) (1:5:15 = 1 monobond-5 cement -15 sand) -in damaged area in 30mm thickness including leveling profiling etc complete all as per manufacturer's instructions and as directed by Engineer-in-Charge (work carried out upto 7th floor) (rates are inclusive of necessary scaffolding) Make :- Dr Fixit, Sita, STP, Fosroc as approved
Providing and applying jacketing around columns with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete. Note :- Reinforcement shall be measured and paid separately rates quoted shall be inclusive of jacketing, formwork and micro concrete etc including chipping off old loose concrete surfaces complete all as specified. (work carried out upto 7th floor) (rates are inclusive of necessary scaffolding) Make :- Dr Fixit, STP, Fosroc as approved
Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.
M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified and directed.
Preparation of new plastered surfaces of walls/Ceiling and applying two coats of acrylic emulsion exterior grade (100%) paint over a coat of primer complete all as specified and directed. (for storey from GF to 7th floor) incl all necessary scaffolding etc.
M&L for preparation of old steel surfaces of any description and applying two coat of synthetic enamel paint complete all as specified. (for storey from GF to 7th floor) incl all necessary scaffolding etc. MAKE : Berger Luxol, Nerolac High gloss, Asian Apcolite
S&F 100 mm dia sand cast CI branch piece (single/ double) of any radius with oval access door, jointed with neat cement paste complete all as specified and as directed. (for storey from GF to 7th floor) Make - NECO, Jindal, Prince
S&F as in repairs 110mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge. Make - Prince, Finolex, Supreme
S&F as in repairs 110mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding etc complete all as specified and as directed by Engineer-in-Charge. Make - Prince, Finolex, Supreme
M&L preparation of old surfaces of walls and applying two coat of white wash on walls etc all as specified.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil, complete all as specified.
M & L PCC 1:2:4 type B2 ( 40 mm graded aggregates) as in foundation filling and mass concrete complete all as specified and directed.
S&F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified. (work is carried above 4th floor)
S&F rolled sections as in main & cross beams , columns, hip and jack rafters , purlins where connected to common rafters and running rails & any other places with angles cleats ot other connected plates confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified.
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165
S&F plates (plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attahment, confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified. (work is carried above 4th floor)
Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified. (work is carried above 4th floor)
M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
S&F as in repairs 6mm thick coloured plastic aluminium composite sheets fixed in frame work and cutting as per requirement , complete all as specified.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling ad mass concrete, complete all as specified.
M&L for cement concrete interlocking paver tiles 60 mm thick having glossy finish (colour and pattern approved by GE) (tested as per IS 1237-1980) laid over and including 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compaction by means of surface vibrator & removing of old broken tiles, complete all as manifacture instructions specified and directed.
M&L for writing letters or figures (BLOCK , ROMAN , ITALIC OR INDIAN ) n exc 30cm high and letters shall be painted with thick paint so that they shall stand out boldly and solidly without showing signs of brush marks to obtain desired result with colour and all as approved and directed by Engineer-in-Charge.
M&L for uprooting of small plants/roots from walls upto 7th floor of bldg. and use chemical to permanently destroy the roots and making good to disturbed surface with brick work in CM 1:4 and plastering in CM 1:4 on both sides of wall area of surface n exc 30cm x 30 cm complete all as specified and directed
Cleaning and desilting of sewage lines of any size any depth by pumping out /removing liquid waste/sewage ,plugging the ends pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same(silt,sludge &other waste material) in leak proof trucks covered with tarpoline to outside of MD land all as per existing rules and regulations of civil authorities and flushing the sewer lines with fresh water etc complete all as specified and directed by Engr-in-Charge.
(a) for 150 mm dia pipe line
(b) for 200 mm dia pipe line
(Note: The above qty is considered for one year cleaning work will be done on quarterly basis as per plan given and regular complaint will be attended simultanously.
Cleaning & desilting of manholes depth not exc 1.50 mtr by pumping out/removing liquid waste/sewage & plugging the ends sewer pipes or diverting the flow into drains if necessary, removing silt, sludge etc, sprinking bleaching powder on the silt to avoid bad smell including all precautionary and safety measures, such as safety belts, lighting arrangements face mask etc and removing the same (silt, sludge & other waste material) in leak proof trucks covered with tarpaulin to outside of MD land all as per existing rules and regulations of civil authorities and cleaning the manholes with fresh water etc complete all as specified and directed by Engr-in-Charge.
(i) For Depth not exc 1.50 m
(ii) For Depth exc 1.50m but n.exc 3.00m
(Note: The above qty is considered for one year cleaning work will be done on quarterly basis as per plan given and regular complaint will be attended simultanously.
Cleaning the chocks/blockages in AC/CI/PVC soil waste/rain water pipe of any dia by removing cleaning eye and refixing the same after cleaning the pipe, making good damaged cement joints, dia of pipe not exc 150mm dia complete all as specified and directed by Engr-in-Charge.
(a) From Ground floor to 4th floor of bldg.
(b) From 5th floor to 8th floor of bldg.
(c) From 9th floor to 12th floor of bldg.
(b) From 13th floor to 16th floor of bldg.
Cleaning and removal of foreign material from inside the Gully trap/WC Pan, Nahani trap, Floor trap etc including removing & re-covering of RCC/CI cover and directly buried in the ground to a distance not exc. 50 m along with spreading of bleaching powder complete one or more times all as specified and directed.
Removing/cleaning of chocks/blockages of sewage of any size between manholes at any depth including pumping liquid waste/sewage, plugging and diverting the flow in the drain if necessary using Kampti/cleaning rods, choke removing machine etc and including taking precautionary and safety measures such as use of safety belts, dry cells, torch for lighting inside the manholes and drains etc including drains manholes on either side and sewers passing hole knots disc of required size and sprinkle bleaching powder at places from where they are removed etc complete all as specified.
M&L for Jointing only cast iron pipes and fittings AC pipes in repair with cement joints for pipes 100mm dia upto ground/stilt plus 7th floors, complete all as specified.
All as per item No. 175 above but 75mm dia & ditto
Excavation in trenches in n.exc 1.5m wide and n exc 1.5 in depth for foundation etc or for shaffs walls, manholes pier holes etc n exc 10 Sqm on plan and n exc 1.5m depth and getting out in hard/dense soil as specified
S&F for 200mm bore RCC pipe class NP-2 laid and jointed complete with collers as specified including testing all as specified and directed by Engineer-in-Charge.
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes including forming cradle after they are laid and tested for 200mm bore RCC pipe complete all as specified and as directed by Engineer-in-Charge.
M&L for Salt-glazed stoneware drain pipes 150mm internal dia, laid in trenches and jointed as specified including dismantling of existing drain pipe complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and as directed by Engineer-in-Charge.
Returning filling in including spreading leveling watering and well ramming in layers not exc 25 with soil
Removing excavated material / debries including loading /unloading, upto 50 km and depositing all per BMC guidelines, all as directed.
M&L for Cutting into existing manholes for connecting new drains of internal dia 200mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, complete all as specified.
S&F in repairs Cast iron work grade FG 150, machined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles machined each exceeding 5 Kg by weight complete all as specified and directed by EIC
S&F as in repairs PVC (SWR) branch piece single (single Y) of 110 mm bore & ht. upto 15th floor of bldg., complete all as specified.
M&L old size Brick Work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement moter 1:4 complete all as specified.
M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in benching, bed plates, coping and the like including from work and finsihing all exposed surface of concrete.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement, including forms mould, mi-tred/ stopped ends etc.
S&F as in repairs factory made RCC cover slab of size 450mm x 600mm size and 100mm thick , including placing over at directed locations, complete all as specified and directed by Engineer-in-charge.
Material & labour for cleaning the existing drainage/culvert including removing cover slab carefully without damaging and clean soils,spoils,vegetation,silt etc and relaying cover slabs and removing waste materials outside MD Land complete all as directed by Engineer-in-Charge.
Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair, complete all as specified.
Dismantling of old interlocking tiles carefully and Refixing in same location interlocking paver tiles any thickness and M&L for 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compation, complete all as specified and directed.
M&L for cleaning of PCC paver block, chequred tiles and any type of PCC flooring by water spray and apply one coat of acrylic emulsion paint suitable for floor by using brush, complete all as specified.
M&L for glazed Chequered cement concrete tiles 25cm x 25cm x 25mm thick with grey cement & pigments, set, jointed and pointed in neat cement slurry in floors over screed bed or bedding layer of mortar in CM (1:4) 20mm thick for laying tiles and including dismantling of old tiles, complete all as specified.
M&L for raking out random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified & directed.
M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:3 , complete all as specified & directed.
Preparation of old plastered surfaces of wall and apply two coats of Acrylic emulsion exterior paint of required shade complete all as specified. Note : Work carried out upto 7th floor of building.
Taking down carefully aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc to be measured separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified.
Material and Labour for point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC casing and caping of size not less than 20 / 25 mm dia including PVC bend, tee joints etc as per site requirement , ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes/ modular boxes surfacing on wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for :-
(a) One light point controlled by one switch SP one way.
(b) One ceiling fan point controlled with one 5A switch
(c) One exhaust fan point controlled with one 5A switch
(d) One 3 pin socket outlet 5Amps on independant board.
(e) One 3 pin socket outlet 5Amps on same board with other switches.
(f) One 3 pin socket outlet 15 Amps on same board with other switches.
Material and Labour point wiring for Geyser /AC complete with 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC casing and caping of size not less than 20 / 25 mm dia including PVC bend, tee joints etc as per site requirement, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly.
Material and Labour point wiring for 15 Amps socket complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC casing and caping of size not less than 20 / 25 mm dia including PVC bend, tee joints etc as per site requirement, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly.
Supply and fix Modular Switch, 6Amp, One way, 1 module. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
Supply and fix support function blank plate single, 1 module complete all as specified and directed.
Supply and fix Modular type, electronic fan regulator (5 step), 450 Watts, 230 volts, 2 module complete all as specified and directed . Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
Supply and fix ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified.
Supply and fix Modular Socket oulet, 6 Amps, 2/3 pin combined, 2 module. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
Supply and fix Modular Socket oulet, 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
Supply and fix Modular white cover plate with Frame 2 Module complete all as specified and directed. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular white cover plate with Frame 3 Module complete all as specified and directed. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular white cover plate with Frame 4 Module complete all as specified and directed.Make : Legrand(Arteor), Havells(Coral) , Anchor(Ave) .
Supply and fix Modular white cover plate with Frame 6 Module complete all as specified and directed. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular white cover plate with Frame 8 Module complete all as specified and directed. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular white cover plate with Frame 12 Module complete all as specified and directed. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular metal flush box 2 module including cutting and chassing complete all as specified and directed. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular metal flush box 3 module including cutting and chassing complete all as specified and directed Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular metal flush box 4 module including cutting and chassing complete all as specified and directed Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular metal flush box 6 module including cutting and chassing complete all as specified and directed.Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular metal flush box 8 module complete all as specified and directed Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix Modular metal flush box 12 module including cutting and chassing complete all as specified and directed. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fix baton intergrated LED channel 1x20WH accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed . Make : Havells/Philips/Jaquar
Supply and fix baton intergrated LED channel 1x10 WH accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : Havells/Philips/Jaquar
Supply and fix Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket for window type air conditioners.
Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces.
Supply and fix submain wiring in repair with two single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC casing and caping of suitable dia, ISI marked including 1 single core cable with stranded copper conductor of size 4 sqmm (green colour) for earthing. Make : Polycab, Havells, Plaza, Note :- (i) Two runs of 4Sqmm cable, 1 run of PVC casing & caping and 1 run of 4 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC conduit.
Supply and fix sheet metal enclosure 8 way Double door type having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed. Make: ABB, Strandred/ Legrand
(a) MCB SPN 63 Amps, 240 Volts. Make - Legrand Equivalent in siemens/Standard/ Havells
(b) MCB SP 6-32 Amps, 240 Volts. Make - Legrand Equivalent in siemens/Standard/ Havells
Material and labour for cleaning all ldust filling cavities with filler, prepartation of surfaces, painting of ceiling fans , in situ with one coat of synthetic enamel paint by spray painting complete all as specified and directed . Make : Asian Apoclite, Berger, Nerolac Hi Gloss
M & L for rewinding of unserviceable ceiling fans lof size 1200/1400 sweep with approved copper enamalled wire of suitable guage, varnishing, replacing existing split/ quarter pins, rubber bush, capacitor 2.5 Mfd and including taking down and refixing in exsiting position and testing complete all as specified and directed by Engr in charge.
S&F in repair Switch 5 Amps piano type, single pole 230 Volts complete all as specified and directed. Make : Anchor / leader/ cona/plaza
S&F in repair switch socket combination multipurpose for 3/2 pin 5 Amps flush type ISI marked complete all as specified and directed. Make : Anchor / leader/ cona/plaza
S&F in repair switch socket combination multipurpose 2 in 1 for 3 pin 15 Amps & 3pin 5 Amp controlled by one switch flush type complete all as specified and directed. Make : Anchor / leader/ cona/plaza
S&F in repair stepped type electronic fan regulator flush type 450 Watts, complete ISI marked all as specified and directed Make : Anchor / leader/ cona/plaza
S&F in repair bell push flush type 5 Amp complete ISI marked all as specified and directed. Make : Anchor / leader/ cona/plaza
Supply and fixing in repair Capacitor 2.5Mfd complete all as specified and directed.
Supply and fix in repair Bell electric AC 230Volt single pole musical type with ISI mark complete all as specified and directed Make : Anchor / leader/ cona/plaza
Supply and fix in repair PVC Box for Switches, with fixing accessories complete of the following sizes :-
(a) -do- but size 4”x4”
(b)-do- but size 4” x 7”
(b)-do- but size 6” x 8”
(c)-do- but size 10” x 8”
Supply and fix in repair LED lamp suitable for 14 watts, 240 volts, single phase, 50 Hz, Lumen 1450 AC supply complete all as specified and directed. Make :Jaquar / Philips/ Havells.
Material and Labour in repair for Lamp holder, PVC /Polycarbonate type with cord grip cap suitable for pendant fittings complete all as directed by Engineer-in-Charge. Make :Bajaj / GEC/ Havells.
S S ENTERPRISES
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .