REPAIR/MAINT, POLISHING AND PAINTING OF STEEL AND WOODEN FURNITURE AT JALIPA MIL STN UNDER GE (A) BARMER.

Amount

REPAIR TO CHAIR WRITING MAP - FD/E6/MAP/12 Removing old Cushion seat from the existing Chair writing MAP and S&F new Cushion seat with upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified in drawing and diredted by Engr-in-Charge

Removing old cushion back tapestery/ Rexine from the existing Chair writing MAP and S&F new tapestery/ Rexine with upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified in drawing and diredted by Engr-in-Charge

Removal od old u/s hand rest of chair writing MAP and S&F new hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front, complete all as specified and directed by Engr-in-charge

Removal of old U/S leg frame and S&F new leg frame of cantilever type MS tubular frame of size 25mm x 10mm complete all as specified and directed by Engr -in charge

Removal of old U/s foam cushioned from seat & back and S&F new moulded foam cushioned 40mm density as shape and size and fixed over 12mm thick hot pressed plywood with PVC liping all round, complete all as specified and directed by Engr -in charge

Taking down old U/S Rubber stopper and S&F new Rubber stopper at the bottom of leg.

M&L for painting to iron surface of chair writing MAP with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed by Engr -in charge

REPAIR TO ALMIRAH LARGE STEEL WITH SHELVES :- FD-67 (M)/351/1031 Removal of old existing U/S shutter (Single Leaf) of almirah large steel and S&F new shutter made of 1 mm thick PBI sheet as per existing shape and size incl a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed.

All as per item No 2. above but Shelves

All as per item No 2. above but Cover plate of locks

Removing U/S lock of almirah large and S&F new brass lock 6 levers Godrej pattern as per existing size with duplicate keys complete all as specified and directed

Removing of old U/S lock assembly and S&F new lock assembly of 10 mm dia MS rod as per trade pattern incl a coat of red oxide primer and preparation of new steel surfaces complete all as specified and directed.

Removing of old U/S handle of almirah and S&F new chromium plated steel handle of existing shape and size complete all as directed

Removing of old U/S key plate and S&F of new Chromium plated key plate fixed with screw and nuts of almirah large steel complete all as directed.

Removing of old U/S leg of almirah large steel and S&F new leg made of 1 mm thick PBI sheet with Gas welding as per existing shape and size incl a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed.

M&L for painting spray painting of almirah large steel with two coat synthetic enamel paint over old painted surfaces / new surfaces incl preparation of old surfaces complete all as specified and directed.

REPAIR TO ALMIRAH MEDIUM STEEL WITH SHELVES :- FD-67 (M)/350 /1032/1034 All as per item No 2 here-in-before but shutter of Almirah Medium

All as per item No 2 above but Shelves of Almirah Medium

All as per item No 2 above but Cover plate of locks of Almirah Medium

All as per item No 2.03 above but locks of Almirah Medium

All as per item No 2.04 above but lock assembly of Almirah Medium

All as per item No 2.05 above but Handle of Almirah Medium

All as per item No 2.06 above but Key Plate of Almirah Medium

All as per item No 2.07 above but Legs of Almirah Medium

All as per item No 2.08 above but Painting of Almirah Medium

REPAIR TO LOCKER BED SIDE STEEL:-FD-257/1029 All as per item No 2 here-in-before but shutter of Locker steel

All as per item No 2 above but shelves of Locker steel

All as per item No 2.05 above but Handle 'D' type of Locker steel

All as per item No 2.07 above but Legs of Locker steel

All as per item No 2.08 above but Painting of Locker steel

Removing of old U/S haps and stapple and S&F of new Chromium plated haps & stapple fixed with rivets of locker steel complete all as directed.

REPAIR TO TABLE DINING OR's :- FD-165(M) Supply and fixing in replacement including welding mild steel square tube of size 25mm x 25mmx 1.6 mm thick as in frame complete all as specified as directed and as shown on drawing.

Supply and fixing in replacement of top with 18 mm thick block board of size 1900 mm x 685 mm with aluminium sheet 22 guage on top complete all as specified , as directed and as shown on drawing.

REPAIR TO CHAIR CB STEEL WITH ARMS-FD-75(M) Removing the existing unserviceable/ broken seat for chair CB steel with arms and supply and fix new Seat of size 450 x 390 mm complete with frame made out of 12mm thick plywood duly pasted with 75mm PU Foam covered with tapestry Jute pattern dark brown/Red/Choclate colour not less than Rs 250 per RM . The seat frame to be bolted to the MS tublar frame of the chair by four 75mm long screw complete all as directed by Engr-in-charge

All as per item No 6 here-in-before but back frame

Removal of old u/s arms of chair CB steel with arms and S&F new arms made of 1st class hard shisham wood duly planned,finished smooth with black hish class polish and fixed with steel screws of required size complete all as specified and directed.

M&L for painting to chair CB steel with arms with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed.

REPAIR TO CHAIR VERANDAH FD-256/259/359 Removing the existing unserviceable/ plastic cane, new PVC seat made of PPCP material 4mm thick (Make : AMKO/SWASTIC/HARMONY) of Chair Verandah MAP including taking down the old worn out /broken seat all as specified as shown on drg and directed by Engr-in-Charge.

Preparing the existing steel surfaces and spray panting with one coat of white synthetic enamel paint and providing new plastic shoes for chair verandah & including taking down old shoes complete all as specified and shown on Drg.

REPAIR TO TABLE OFFICE CLK/TYPIST STEEL FD-84(M)/1004 Removing the existing unserviceable/ broken top of steel table office clerk and S&F new table top of 1220 X 600 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade all as directed by GE/Engr-in-Charge

Removing of old unserviceable drawer and S&F of new drawer made of 22 gauge MS sheet with coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

Removal of old U/S lock and S&F new lock of 06 levers Godrej pattern with two keys completed all as specified and directed.

Taking down old U/S long rail table office clk/typist and S&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed b y gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

All as per item No 8.03 above but short rails

All as per item No 8.03 above but stiffener

All as per item No 8.03 above but legs

Taking down old U/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg.

M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

REPAIR TO TABLE 3' x 3' STEEL FD-1009 Removing the existing unserviceable/ broken top of steel table 3'x3' steel and S&F new table top of 1220 X 600 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade all as directed by GE/Engr-in-Charge

Taking down old U/S long rail table steel 3' x 3' and S&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed b y gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed by Engr -in charge

All as per item No 9.01 above but short rails

All as per item No 9.01 above but stiffener

All as per item No 9.01 above but legs

Taking down old U/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg.

M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed by Engr -in charge

REPAIR TO RACK 6 TIER STEEL FD-1038 Removal of old u/s Shelves of rack 6 tier steel and S&F new shelves made of 1mm thick PGI sheet as per existing shape and size incl two coat of synthetic enamel paint over a coat of red oxide primer on both side and preparation of newsteel surfaces complete all as specified and directed

All as per item No 10 above but back

All as per item No 10 above but side

All as per item No 10 above but top

Removal of old u/s legs of rack six tier steel and S&F new legs of size 40x40x3mm angle as per existing shape and size incl two coat of synthetic enamel paint over a coat of red oxide primer on both side and preparation of new steel surfaces complete all as specified and directed

M&L for painting with one coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

REPAIR TO CHAIR CB STEEL WITHOUT ARMS FD-75(M) Removing the existing unserviceable/ broken seat for chair CB steel without arms and supply and fix new Seat of size 450 x 390 mm complete with frame made out of 12mm thick plywood duly pasted with 75mm PU Foam covered with tapestry Jute pattern dark brown/Red/Choclate colour not less than Rs 250 per RM . The seat frame to be bolted to the MS tublar frame of the chair by four 75mm long screw complete all as directed by Engr-in-charge

All as per item No 11 here-in-before but back frame

M&L for painting to chair CB steel without arms with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed.

REPAIR TO TABLE OFFICE OFFICER STEEL FD-1003 Removing the existing unserviceable/ broken top of steel table office officers and S&F new table top of 1220 X 600 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade all as directed by GE/Engr-in-Charge

Removing of old unserviceable drawer and S&F of new drawer made of 22 gauge MS sheet with coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

Removal of old U/S lock and S&F new lock of 06 levers Godrej pattern with two keys completed all as specified and directed.

Taking down old U/S long rail table office clk/typist and S&F new long rail with 25 x 25 mm Sq tube made of 16 gauge PBI sheet fixed by gas welding incl painting with a cot of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

All as per item No 12.03 above but short rails

All as per item No 12.03 above but stiffener

All as per item No 12.03 above but legs

Taking down old U/S PVC/Rubber shoes and S&F new Rubber /PVC shoes at the bottom of leg.

M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

REPAIR TO GI PIPE CHARPOY WITH PLYTOP FD-220 S&F in replacement of u/s Elbow galvanized iron 32 mm dia 3 ways complete all as specified and directed. Note weight of each elbow not less than 450 grams

S&F in replacement of u/s check nut galvanized iron 32 mm dia, complete all as specified and directed Note :- weight of each check nut not less than 125 grams

S&F in replacement of long rail of 32 mm dia galvanized iron pipe medium grade incl cutting threading at both ends complete all as specified and directed

Fixing only in repairs short rail of 32 mm dia GI pipe medium grade incl cutting, threading as required for short rail of GI Charpoy complete all as specified and directed Note :- short rail shall be converted from long rail retrieved vide item No 13.02 here-in-before

Fixing only in repairs legs of 32 mm dia GI Pipe medium grade cutting, threading at one end as required for legs as per existing size incl S&F 1.6 mm thick, 40 mm dia MS Sheet base plate welded on another end complete all as specified and directed. Note :- Legs shall be converted from pipe retrieved vide item No 13.03 above.

Removing the existing unserviceable /broken ply wood top and supply and fixing new 12 mm thick BWP Grade conforming to IS: 710 plywood top ISI marked alongwith 12 in Nos Countersunk screws and washers on three stiffeners all as shown on Drg and as specified and directed.

REPAIR TO CHAIR REVOLVING TP Removing unserviceable Seat of chair Revolving and Supply and Fix new Seat 75mm thick polyurethane foam(PU) moulded with density 50-55kg per cubic metre thick and hardness over ready made plywood base of 12mm thick BWR Grade and duly covered with tapestry cloth not less than 350/- per RM and PVC liping all as specified and directed. Texture and shade of the tapestry to be got approved by GE/Engr-in-Charge before bulk repairs

All as per item No 14 here-in-before but back of chair revolving

Removing the existing unserviceable PVC arm rest and Supply and Fix in repairs new PVC armrest of best quality one No in one piece arm rest of size 24cmx 6.4cmx 3.3cm shall be made out of polyurethane(PU) 76-85 shore ‘A’ Hardness and reinforced with MS insert scratch and weather resistant.

Removal of old U/S pedestal assembly and S&F new pedestal assembly complete all as specified and directed by Engr -in charge

Taking down old U/S twin wheel coasters and S&F new twin wheel coasters press fitted at the bottom of leg.

REPAIR TO CHARPOY MS TUBE WITH PLYTOP FD/MAP-II/01 Removal of old U/s plywood from charpoy MS tube with plytop and S&F 12mm thick ply wood top of size 1950mm x 900mm (Single piece)BWR Grade ISI Mark with MS screws, complete all as specified and directed by Engr -in charge

M&L for painting with one coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

BED HARD STEEL -FD/E6/MAP/08(R) Removing the old welding spots from broken welding joints and re-welding in the same place as required. Thereafter preparation of old surface by sand paper No 50 and wire brush and apply one coat of synthetic enamel paint in Black colour oxide primer complete all as specified and directed.

Removing the existing unserviceable /broken ply wood top and supply and fixing new 12 mm thick BWP Grade conforming to IS: 710 plywood top ISI marked alongwith 06 in Nos Countersunk screws and washers on three stiffeners all as shown on Drg and as specified and directed.

Removing the existing unserviceable shoe and S&F new PVC shoe in leg of Bed Hard as per existing pattern.

Removing existing Head Board of Bed hard steel and S&F new cushioned Head Rest of size 1150x900mm . The headboard shall be fixed with 12mm thick plywood and pasted with PU Foam 75mm thick 32 density duly covered with composite tapestry of leatherette and curved and bolted in the frame for resting and foam cushion.

REPAIR TO CHAIR VISITOR ALL TYPE TP Removing old Cushion seat from the existing Chair writing MAP and S&F new Cushion seat with upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified in drawing and diredted by Engr-in-Charge

Removing old cushion back tapestery/ Rexine from the existing Chair writing MAP and S&F new tapestery/ Rexine with upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified in drawing and diredted by Engr-in-Charge

Removal od old u/s hand rest of chair visitor and S&F new hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front, complete all as specified and directed by Engr-in-charge

Removal of old U/s foam cushioned from seat & back and S&F new moulded foam cushioned 40mm density as shape and size and fixed over 12mm thick hot pressed plywood with PVC liping all round, complete all as specified and directed by Engr -in charge

M&L for painting to iron surface of chair visitor with one coat of synthetic enamel paint including preparation of old painted steel surfaces complete all as specified and directed by Engr -in charge

REPAIR TO TEAPOY VERANDAH FD-383 Removing the existing unserviceable/ broken top of teapoy verandah and S&F new table top of 1220 X 600 mm of 18 mm thick pre laminated MDF board Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade all as directed by GE/Engr-in-Charge

M&L for painting with two coat of synthetic enamel paint over old painted /new surfaces including preparation of old steel surfaces complete all as specified and directed.

SOFA SET 4/5 SEATER FD-281/373 Replacement of existing foam cushion of Sofa including existing tapestry cloth of sofa set 4/5 seater, and supply & fix new PU Moulded Foam of density 50-55 kg per cubic meter of size 560 x 535 x 100mm thick, duly stitched with tapestry cloth and closed with Velcro of suitable size complete all as directed and shown on drg . Note: (The cost of tapestry cloth shall not be less than Rs. 350.00 Per RM).

M&L for smoothening surface with sand paper of Sofa set four seater for repolishing the old polished surface including bottom with one coat of french polish complete all as specified and directed.

M&L for smoothening surface with sand paper of Sofa set five seater for repolishing the old polished surface or unpolished surface including bottom of sofa with one coat of french polish both above and below the sofa complete all as specified and directed.

CHAIR DINING ;-S&F in repair following part of chair dining of 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed;-FD-16(M)/203/ 279 Rear Legs

Front Legs

Removing the existing unserviceable/ broken Side batterns if broken and canning and supplying and fixing 1st class hard wood battern and S&F PVC Seat instead of canning complete all as specified and shown on drgs.

Bottom stiffener

Back stiffener

M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame ( 4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR WRITING:- S&F in repair following part of chair writing with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. FD-20(M)/202/280 Rear legs

Front Legs

Side rail of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

Front/Back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

Bottom stiffener

Back stiffener

Arm rest

M&L for polishing of chair writing with high class French polish to all exposed surfaces except inside of seat frame (4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR EASY:- S&F in repairs following parts of the chair easy with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed ;-FD-17(M)/201 /229 Rear Legs

Front Legs

Side Rails

Front/Back Rails

Back Stiffener

Bottom Stiffener

Arms rest

M&L for polishing of chair easy with high class French polish to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed.

REPAIR OF PEG TABLE :- S&F in repair of the following parts of Table Peg with Ist class hard wood (teak) as per existing shape and size duly planned as shown on drawing complete all as specified and directed; FD-236/266 /277/384 Legs

Long rail

Short rail

Side stiffener

Removing the existing unserviceable table top of peg table and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge

M&L for polishing of table Peg with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

REPAIR TO TABLE DINING 06/08 PERSON :- S&F in repair of following parts of table dining 06/08 pers with 1st class hard wood (teak) as per existing shape and size duly plannned as shown on drg complete all as specified and directed.FD-239/269 /273 Removing the existing unserviceable table top of table dining 8 persons and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge

Removing the existing unserviceable table top of table dining 6 persons and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge

Long rail

Short rail

Stiffener

M&L for polishing with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed.

REPAIR OF TEAPOY : S&F in repair of the following parts of teapoy with Ist class hard wood (teak) as per existing shape and size duly planned shown on drawing complete all as specified and directed:-FD-232/ 278/382 Legs

Long rail

Short rail

Side stiffener

Centre stiffener

Removing the existing unserviceable table top of teapoy and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge

M&L for polishing of teapoy with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

TABLE WRITING : S&F in repair to the following parts of table writing with Ist class hard wood(teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed.;-FD-275 Legs

Long rail of table frame

Short rail of table frame

Drawer including chromium plated knob of 40mm Dia

Bottom centre stiffener

Bottom side stiffener.

Removing the existing unserviceable table top of table writing and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge

M&L for polishing of table writing with high class French polish on all exposed surfaces except top & bottom incl matching new components with old one after preparation of surfaces complete all as specified and directed.

REPAIR TO TABLE 900mm x 600mm WITH OUT DRAWER:- S&F in repair of the following parts of table 900mm x 600mm W/O drawer with Ist class hard wood (teak) as per existing shape & size duly planned as shown on drg complete all as spcd and directed FD-231/284 Legs

Long Rail

Short Rail

Bottom Side stiffener

Bottom Centre stiffener

Removing the existing unserviceable table top of table 900x600 mm w/o drawer and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge

M&L for polishing of table900x600mm w/o drawer with high class French polish on all exposed surface except top& Bottom incl matching new components with old after preparation of surface complete all as specified & directed

REPAIR TO TABLE 900mm x 600mm WITH DRAWER:- S&F in repair of the following parts of table 900mm x 600mm with drawer with Ist class hard wood (teak) as per existing shape & size duly planned as shown on drg complete all as spcd and directed FD-283 Legs

Long Rail

Short Rail

Bottom Side stiffener

Bottom Centre stiffener

Drawer

Removing the existing unserviceable table top of table 900x600mm eith drawer and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge

M&L for polishing of table900x600mm w/o drawer with high class French polish on all exposed surface except top& Bottom incl matching new components with old after preparation of surface complete all as specified & directed

REPAIR TO TABLE CENTRE:-S&F in repair of the following parts of table centre with Ist class wood (teak)As per existing shape and size duly planned as shown on drawing completed all as specified and directed;-FD-235/274 Legs

Long rail

Short rail

Side stiffener

Removing the existing unserviceable table top of table centre and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge

M&L for polishing of Table Centre with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

REPAIR TO TABLE 900mm x 900mm:- S&F in repair following parts of the table 900x900mm with Ist class hard wood (teak) as per existing shape and size duly Planned as shown on drawing complete all as specified and directed ;-FD-88(M)/ 291 Legs

Long rail

Short rail

Removing the existing unserviceable table top of table 900 x 900 mm and S&F new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge

M&L for polishing of table 900x900mm with high class French polish on all exposed surfaces except top & Bottom incl matching new components with old one after preparation of surface complete all as specified and directed.

REPAIR OF TABLE DRESSING GENTS;- Repair of following parts of table dressing ladies as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :-FD-31 (M)/230 Removal old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size.

Removal old U/S back ply of class and fixing 6mm thick Commercial plywood of existing shape & size

Removal of old U/S Pre-laminated particle board top of table and fixing new 18mm th pre-laminated particle board as per existing shape & size.

Removal of old U/S Drawer and fixing new Drawer of 6 mm thick ply wood commercial with front 18mm pre-laminated particle board as per existing shape and size

CHAIR EASY WITH CUSHION:- S&F in repairs following parts of the chair easy with cushion with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed ;-FD-358 Rear Legs

Front Legs

Side Rails

Front/Back Rails

Back Stiffener

Bottom Stiffener

Arms rest

S&F of cushion foam for chair easy 28 density 75mm thick (Make-Sleepwell) duly covered with best quality tapestry cloth complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 300/- per RM

M&L for polishing of chair easy with cushion with high class French polish to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed.

RE-CANNING OF CHAIRS :- FD-228,229, 279,280,252,244 Taking out old u/s cane from chairs etc and re-canning of wooden chairs, dressing stool,Bin solied linen etc with new 2 mm wide half round Godrej pattern white plastic cane and border shall be woven with new 4 mm half round plastic cane of superior quality. complete all as specified and directed.

CHAIR DINING CUSHIONED (MAP) ;-S&F in repair following part of chair dining cushioned of 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed;-FD/MAP-II/04 Rear Legs

Front Legs

Side rail of seat frame

Front/back rails of seat frame

Removing the existing worn out seat cushion and S&F new PU foam seat foam of size 450X450X75mm thick, density 50-55 Kg/cum with 12 mm thick plywood BWR grade phenol bonded covered with tapestry cloth of not less than 350/- per RM for chair dining cushioned complete all as specified and shown on drawing.

Bottom stiffener

Vertical back stiffener

Nylon buffers on the bottom of legs

M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame ( 4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

M/s B. S. Solanki Builders (BID ID -3431162)

SK INDUSTRIES (BID ID -3431522)

M/S Tanisha Traders (BID ID -3429738)

Lalit and Brothers (BID ID -3431746)

Narender Constrution Company (BID ID -3436136)

M/s godara infratech and power industries (BID ID -3430651)

SNEH CORPORATION (BID ID -3432249)