Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8.3 LAccepted-AOC | 1 | Accepted-AOC Accepted | |
| 2 | 2₹8.3 L+₹2,346 (0.28%)Rejected-AOC | 2 | Rejected-AOC Highest amount |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
30 Jan 2024, 3:00 pmClosed
Executive Officer
Executive Officer Dhali tp office
Erode Zone Tiruppur District 15th Finance 1st installment UnTied grant 2023-2024 Construction of Compound wall Burial Ground Thirumoorthinagar in ward no13 at Dhali Town Panchayat
2024_DTP_412505_1
165/2023
Open Tender
Civil Works - Buildings
Works
180 days
dhali tp
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹20,000
Yes
12 Feb 2024
24 Jan 2024
31 Jan 2024
24 Jan 2024
30 Jan 2024
24 Jan 2024
Amount
Earth work excavation for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherver necessary as per SS 20 B etc., complete complying with standard specifications.
Plain Cement Concrete 1:4:8 (One Cement,four M.sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification (TNDSS NO:28 V, VI S2 (SS.A) VII)
Supplying and erecting Centering for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC slabs, Rectanular beams, Lintels and Stair case waist slabs conopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over country wood joists of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by Casuarian props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed by departmental Engineers. COLUMN
GRADE BEAM
Supplying, fabricating and placing in position mild steel/Ribbed for steel roads for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specifications.
Reinforced Cement Concrete 1: 1 1/2: 3 ( one cement, one and half sand and three aggregate) mix using machine crushed / hand broken 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding centering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherver necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 and kraft paper laid without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers.
Brick work in cment mortar 1:5 (one cement and five sand) mix using second class chamber burnt bricks of size 9" x 4 3/8" x 2 3/4", including cost and conveyance of all other labour and material charges to site etc., complete complying with standard specifications.
Supply and fixing of grill gate including all accessories and cost and fixing in position including cost and conveyance of all other labour and material charges to site etc., complete complying with standard specifications.
Plastering with cement mortar 1:5 (one cement three sand) mix to 12mm thick and including hacking the surfaces and providing necessary cement mortar nosing beading as per size, specification wherever necessary using the same mix as directed by the departmental officers etc., complete complying with standard specifications.
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. (Schedule Item no:358)
Painting two coats with approved good quality enamel paint over new iron framme including cleaning, preparing surface and curing etc., complete complying with standared specification and as directed by Engineers.
R MOORTHY CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .