2702-AR and MO Minor Works

Supply of earth at site including excavation royalty of earth carriage by mechanical transport including loading, unloading and banking the same in layers not exceeding 20cm in deptt, breaking clods rolling each layer with ½ tonne roller of wooden of steel rammers and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankment for road, flood banks, marginal banks and guide banks or filling up ground depressions with a lead of 5.00 Km. and lifts 1.5 m./loose soil.

Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Hiring of 3D Hydraulic excavator (JCB Machine) including operation charges like fuels, operator, helper etc. and cost of mobilization of machine to site, on hourly basis for removing of slush, garbage, rubbish, grass and floating materials etc. from the bed of the channel complete as per direction of Engineer-in-charge (for the purpose of payment working hours of machine shall be recorded).