GE/U(N)-57/2020-21 CANING OF CHAIR VERANDAH AND CERTAIN REPAIRS TO CHARPOY GI PIPE UNDER GE (NORTH) UDHAMPUR

Amount

CHAIR VERANDAH Drawing No FD-256 Removing of old unserviceable plastic cane from chair verandah. S & F and recanning with plastic cane 4mm half round best quality as shown on drawings. Make : Shah/Premium or any MES approved make as sample approved by GE

Drawing No FD-256 Removing of old unserviceable MS rod from chair verandah and providing new MS rod 10mm dia 440mm long fixed by gas welding complete all as specified and as shown on drgs and directed by Engineer-in-Charge.

Drawing No FD-256 Spot welding to existing cracked joints of steel chairs of various type of nomenclature by gas welding not exceeding 2.5 cm in length as required and after welding joints be smoothen properly by grinding complete all as specified and directed.

Drawing No FD-256 Applying two coats of white synthetic enamel paint after preparation of surfaces of chair verandah all as specified and directed any MES approved by GE.

CHARPOY GI PIPE : Drawing No FD-220 Removing of existing u/s torn out nylon Newar from Charpoy GI pipe. Supply and fixing of new 12mm thick(7ply) plywood, BWR grade, ISI marked of size 1.95mtr x 0.90mtr including 02(Two) Nos of stiffener of size 900mm x 40mm x 5mm of MS flat iron duly fixed with long rail(by nut and bolt) at 90 degree bend at both end at an appropriate distance. So as to fit tightly with inner wall of both the long rail at an equal intervals to provide more strength to hard top. Necessary holes and perforation to be made in short rail, long rail & stiffener as per direction of Engineer-in-charge. Screw/check nut to be used of suitable size. Corner of plywood is to be rounded off properly. All other work to be done as per direction of Engineer-in-charge. (Make of plywood : Kitlpy/Century/Greenply as sample approved by GE

Taking down UNSV broken long rails of Charpoy GI Pipe and supply and fixing long rails of Charpoy made out of GI Pipe 32mm bore medium grade ISI marked and approved by Engr-in-charge including threading completed all as specified and shown on drg. Make : Jindal/Prakash surya/TATA or any MES approved make.

Taking down UNSV broken short rail of Charpoy GI Pipe and fixing the short rail (short rail, shall be made from long rail obtained from items serrial No 2 above including threading both sides. Completed all as specifie and showon in drg.

Taking out UNSV elbow 3 way 32mm bore of Charpoy GI Pipe and supply and fixing of new elbow 3 way 32mm ISI mark as approved by Engr-in-Charge complete all as specified and shown in drg .

Taking down UNSV broken check nuts of Charpoy GI Pipe and supply and fixing new check nut suitable for Charpoy GI Pipe as approved by Engr-in-Charge complete all as specified and shown on drawing.

Taking down UNSV legs to Charpoy GI Pipe and fixing new legs in Charpoy (Legs shall be made fro short rail obtained from item serial No 3 above including threading one side. Complete all as specified and shown on drawing.

TULSI RAINA AND SONS

GUPTA FURNITURE HOUSE

KHAJURIA BUILDERS