REPAIR / MAINT TO BOUNDRY WALL, SECURITY WALL, DRAIN, GATE, FENCING, FOOTPATH AT 14 EME, 874 AT BN AND ADJOINING AREA UNDER AGE B/R-II OF GE (N) UDHAMPUR

Amount

Demolition of brick work or stone masonry, built in cement mortar including all quoines, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan, exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed.

All as per serial item No. 2.00 here-in-above but except bricks. Note :- Stones obtained from serial item No. 1.00 above shall be reused.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4, complete all as specified and directed.

All as per serial item No. 4.00 here-in-above but except stones. Note :- Stones obtained from serial item No. 1.00 above shall be reused.

M&L for flush pointing to random rubble, uncoursed on brought upto course on masonry or concrete block walling in cement mortar 1:4, complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry or cement concrete walls including raking out joints, hacking for key, scrubbing down with water including remaval of derbis, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or stone masonry surface or concrete surface with using water proofing compound and finishing the surface even and fair, complete all as specified and directed. Note :- Rate for WPC shall be deemed to include in the quoted rates.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint in any pattern or camouflage pattern, complete all as specified and directed.

M&L for preparation of plastered or unplastered old surfaces of walls, chajjas etc. by brooming down or steel wire brushing, scraping down smoke soots, moulds, moss efforescent salls, treating oil and greasy spots etc. and applying one coat of cement base paint in any pattern or camouflage pattern, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in posts, pillars, surface channels and drains, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) for rough finished concrete surfaces, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment of any shape and size, confirming to IS:15658-2006 of 80mm thickness M-40 grade and joints filled with sand, complete all as specified and directed.

M&L for machine pressed rubber moulded manufactured/ compacted by vibrating table method precast concrete interlocking paver block, laquor finish, any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and joints filled with sand, complete all as specified and directed.

M&L for sand filling under floors, foundations or under paver blocks including watering and consolidation, complete all as specified and directed.

M&L for coloured chequered cement concrete tiles of size 30cm x 30cm x 25mm thick each, glossy finish, set, jointed and pointed in neat cement slurry as in floors, complete all as specified and directed.

Re-fixing of interlocking paver block/ tiles of any thickness and size, laid dry in position over sand cushioning including dismantling of existing tiles, complete all as specified and directed.

M&L for 100mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in floors, complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.

M&L for precast cement concrete soild blocks masonry, exc 10cm in width in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), set in cement mortar 1:4, complete all as specified and directed.

M&L for 450mm bore reinforced cement concrete pipes, Class NP2, laid and jointed completed with collar including dismantling/ breaking up and taking out of old exisitng pipe of any dia, complete all as specified and directed.

M&L for 300mm bore reinforced cement concrete pipes, Class NP2, laid and jointed completed with collar including dismantling/ breaking up and taking out of old exisitng pipe of any dia, complete all as specified and directed.

M&L for 200mm bore reinforced cement concrete pipes, Class NP2, laid and jointed completed with collar including dismantling/ breaking up and taking out of old exisitng pipe of any dia, complete all as specified and directed.

M&L for high tensile galvanised steel razer blade concertina coil including fish hook, long blade, medium and short blade, tear blade and the after stretch dia of coil should not less than 650mm including fixing with old existing fencing and properly fixing with MS angle iron including dismantling of old existing concertina coil of any shape and size, complete all as specified and directed.

S&F in replacement galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings, straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified and directed. Note :- Each line wire to be measured and paid.

Restraining, resecuring including making good galvanised 2 strand steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacings, straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified and directed. Note :- Each line wire to be measured and paid.

M&L for mild steel framed work as in doors or gates, angle or other section with gusset plates, rails, braces etc. complete, drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging also fastening, complete all as specified and directed.

M&L for preparation of new steel/ iron surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, over 10cm width or girth not other wise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

MADAN LAL SHARMA AND SONS (BID ID -3296264)

M/S GURU DEV BUILDERS (BID ID -3296988)

KUMAR CONSTRUCTION CO (BID ID -3297187)

sohtra and co (BID ID -3296526)

HANS RAJ SHARMA (BID ID -3296901)

M/s ARJUN SINGH (BID ID -3291066)

MODI CONSTRCUTION COMPANY (BID ID -3293414)

VARDHMAN INTERNATIONAL (BID ID -3297006)

JOGINDER SINGH (BID ID -3297097)

M/S SUSHEEL KUMAR Govt. CONTRACTOR (BID ID -3294777)